18-8 stainless steel screws have good chemical resistance.

Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.

18-8 stainless steel screws have good chemical resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

These steel screws are zinc plated to resist corrosion in wet environments.

A Torx drive has more points of contact than Phillips, slotted, and square drives, allowing you to apply extra force with less slippage or damage to the recess.

Made from 18-8 stainless steel, these screws are chemical resistant.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver.

The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.

These square-drive screws have a flange under the head that distributes holding pressure and reduce the risk of crushing thin metal.

18-8 stainless steel screws have good chemical resistance.

Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.

18-8 stainless steel screws have good chemical resistance.

These steel screws have a black-oxide finish to resist corrosion in dry environments.

Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver.

The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.

18-8 stainless steel screws have good chemical resistance.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

Made from 18-8 stainless steel, these screws are chemical resistant.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

Made from 18-8 stainless steel, these screws are chemical resistant.

A rubber O-ring under the head creates a seal that withstands liquid and gas pressure.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

410 stainless steel is strong, wear resistant, and mildly chemical resistant.

These screws have the strength of 410 stainless steel with added corrosion resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

By drilling their own holes and fastening in a single operation, these square-drive screws save time and effort. Made of 410 stainless steel, they're both stronger and more wear resistant than 18-8 stainless steel screws.

Also known as pancake head screws, these have a head that is about two-thirds the height of standard rounded head screws.

Made from stainless steel, these screws are more corrosion resistant than steel, and almost as strong.

With a drilling tip, these metric screws cut their own pilot hole and threads as you fasten them into material.

A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess.

These steel screws have a head encapsulated by 18-8 stainless steel.

Made from 18-8 stainless steel, these screws have good chemical resistance.

Made from stainless steel to resist galvanic corrosion, use these screws to fasten aluminum to aluminum and steel framing. They save you time and effort by drilling their own holes and fastening in a single operation.

These screws have a free-rotating, permanently attached washer that remains stationary while tightening to prevent bunching while attaching tarps and other fabric to metal.

Also known as roofing screws, these screws are long and made from hardened steel to fasten rigid insulation board to steel decking.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

A Torx drive has more points of contact than a Phillips drive, allowing you to apply extra force with less slippage or damage to the recess.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

A wide cutting slot provides excellent chip clearing and low driving torque in soft metal.

Also known as Swageform screws, threads at the tip are designed to grab material for a fast start with low torque in a wide range of materials.

18-8 stainless steel screws have good chemical resistance.

Thread-forming screws press threads into drilled holes for a tight vibration-resistant assembly.

A drill point powers through metal up to 0.105" thick.

Ribs under the head act as a brake to prevent over-tightening and damaging threads.

Alternating high and low threads minimize driving torque and allow the screw to hold more material between threads for a stronger hold and better strip-resistance than standard drywall screws for wood.

These square-drive screws have a drill point that powers through drywall and into metal studs up to 0.105" thick. Heads are one-third smaller than those of other drywall screws.

With a square-drive head, these screws attach drywall to metal studs up to 0.036" thick. The head is one-third smaller than other drywall screws.