About Sleeving
More
About Rubber
More
Interference-Shielding Expandable Sleeving
Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It’s expandable, so it stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. Cut with sheet metal snips.
Per Ft. | |||||||
---|---|---|---|---|---|---|---|
ID | Expanded ID | Wall Thick. | Temperature Range | Lengths, ft. | 1-99 | 100-Up | |
Tin-Coated Copper | |||||||
1/4" | 5/16" | 1/32" | Not Rated | 0000000 | 00000 | 00000 | |
3/8" | 7/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
1/2" | 9/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
25/32" | 7/8" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
1" | 1 1/8" | 1/16" | Not Rated | 0000000 | 00000 | 0000 | |
1 1/8" | 1 1/4" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
1 1/4" | 1 3/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
1 1/2" | 1 5/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 |
EMI/RFI Shielding Gaskets
These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems. They compress to fill gaps and complete a grounding path around doors and access panels.
Adhesive-back gaskets are wrapped with conductive aluminum foil and stick on with a conductive adhesive. Beryllium copper gaskets withstand repeated compression and decompression over time, so they’re often used with doors that regularly open and close. They’re also known as fingerstock gaskets. Adhesive-back gaskets stick to flat surfaces. Install clip-on gaskets onto surfaces such as circuit board edges or enclosure door frames.
Thickness | Wall Thickness | Finger Thickness | Number of Fingers | Width | Length | Interference Reduction @ Frequency | Backing Type | Mount Type | Temperature Range, °F | Hardness | For Use Outdoors | Each | |
Beryllium Copper | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/4" | 0.004" | 0.06" | 29 | 0.077" | 16" | Not Rated | Plain | Clip On | Not Rated | Rockwell B105 | No | 0000000 | 000000 |
Thickness | Wall Thickness | Number of Fingers | Width | Length | Interference Reduction @ Frequency | Backing Type | Temperature Range, °F | Hardness | For Use Outdoors | Each | |
Beryllium Copper | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.11" | 0.003" | 86 | 0.32" | 16" | Not Rated | Adhesive | -67° to 250° | Rockwell B105 | No | 0000000 | 000000 |
0.13" | 0.003" | 64 | 0.37" | 16" | Not Rated | Adhesive | -67° to 250° | Rockwell B105 | No | 0000000 | 00000 |
0.14" | 0.004" | 43 | 0.38" | 16" | Not Rated | Adhesive | -67° to 250° | Rockwell B105 | No | 0000000 | 00000 |
0.22" | 0.005" | 43 | 0.6" | 16" | Not Rated | Adhesive | -67° to 250° | Rockwell B105 | No | 0000000 | 00000 |
0.32" | 0.004" | 43 | 0.78" | 16" | Not Rated | Adhesive | -67° to 250° | Rockwell B105 | No | 0000000 | 00000 |
Conductive Copper Foil Electrical Tape
Use this tape to modify printed circuit boards, shield components from EMI/RFI (electromagnetic interference/radio-frequency interference), and prototype wiring-board layout and design. It can be soldered.
Tape with conductive adhesive meets Mil. Spec. MIL-T-47012.
Wd. | Overall Thick. | Adhesive Type | Temperature Range, °F | Voltage Rating | Specifications Met | Lg., ft. | Each | |
Short Roll | ||||||||
---|---|---|---|---|---|---|---|---|
Nonconductive Adhesive | ||||||||
1/4" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 000000000 | 00000 |
1/2" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 000000000 | 00000 |
3/4" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 000000000 | 00000 |
1" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 000000000 | 00000 |
2" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 000000000 | 00000 |
3" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 000000000 | 00000 |
6" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 18 | 00000000 | 000000 |
Conductive Adhesive | ||||||||
1/4" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 00000 |
1/2" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 00000 |
3/4" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 00000 |
1" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 00000 |
2" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 00000 |
3" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 00000 |
6" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 18 | 000000000 | 000000 |
Long Roll | ||||||||
Nonconductive Adhesive | ||||||||
1/4" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 108 | 000000000 | 00000 |
1/2" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 108 | 000000000 | 00000 |
3/4" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 108 | 000000000 | 00000 |
1" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 108 | 000000000 | 00000 |
2" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 108 | 000000000 | 000000 |
3" | 0.0029" | Acrylic | -40° to 325° | Not Rated | UL 510 | 108 | 000000000 | 000000 |
Conductive Adhesive | ||||||||
1/4" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 00000 |
1/2" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 00000 |
3/4" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 00000 |
1" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 00000 |
2" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 000000 |
3" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 000000 |
6" | 0.0035" | Acrylic | -40° to 325° | Not Rated | MIL-T-47012, UL 510 | 54 | 000000000 | 000000 |
Conductive Mesh Electrical Tape
This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference). When wrapping objects, tape should overlap half of its width to achieve a highly effective four-ply shielding.
Wd. | Lg., ft. | Overall Thick. | Material | Edge Material | Adhesive Type | Temperature Range, °F | Voltage Rating | Shielding Effectiveness @ Volume | Color | Each | |
1" | 16 | 0.025" | Copper, Polyester Plastic | Tinned Copper Mesh | Acrylic | -40° to 345° | Not Rated | 1 MHz @ 70 dB | Silver | 0000000 | 000000 |
Conductive Cloth Electrical Tape
Made of polyester fabric with a copper/nickel filler, this tape is highly conductive throughout, including the adhesive. Use it to shield cables and electronic components from EMI (electromagnetic interference).
Lg., ft. | Wd. | Overall Thick. | Material | Adhesive Type | Temp. Range, °F | Voltage Rating | Shielding Effectiveness @ Volume | Color | Each | |
3 | 1" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 000000 |
3 | 2" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 00000 |
12 | 1" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 00000 |
12 | 2" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 000000 |
25 | 1" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 000000 |
25 | 2" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 000000 |
50 | 1" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 000000 |
50 | 2" | 0.0048" | Copper, Nickel, Polyester Cloth | Acrylic | -40° to 155° | Not Rated | 10 MHz @ 95 dB | Gray | 0000000 | 000000 |
EMI-Reducing Grounding Ribbon
Low resistance at radio frequencies reduces electromagnetic interference (EMI). The smooth, flat design provides more surface area contact than wire or braid. Polyester insulation prevents shorting. Use in circuit board applications and other tight spaces.
Lg. | Electrical Connection Type | Hole Dia. | Wd. | Thick. | Material | Features | Specifications Met | Each | |
Flexible Insulated Ribbon | |||||||||
---|---|---|---|---|---|---|---|---|---|
3" | Lug × Lug | 3/16" | 1/2" | 0.013" | Copper | Tin-Plated Ends | UL Recognized Component, UL 94 V-1 | 0000000 | 000000 |
6" | Lug × Lug | 3/16" | 1/2" | 0.013" | Copper | Tin-Plated Ends | UL Recognized Component, UL 94 V-1 | 0000000 | 00000 |
9" | Lug × Lug | 3/16" | 1/2" | 0.013" | Copper | Tin-Plated Ends | UL Recognized Component, UL 94 V-1 | 0000000 | 00000 |
12" | Lug × Lug | 3/16" | 1/2" | 0.013" | Copper | Tin-Plated Ends | UL Recognized Component, UL 94 V-1 | 0000000 | 00000 |