Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

This sleeving withstands temperatures up to 390°F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

This sleeving withstands temperatures over 1000°F, such as in refineries.

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Fold these hinged panels into the configuration you need.

Made with Kevlar to resist abrasion, scratches, tears, and punctures.

A universal mounting bracket adapts to fit most equipment.

For protection from low-level arc flash hazards, these kits include several of the necessary safety items in a storage bag.

Also known as wave solder gloves, wear these to avoid damaging static-sensitive electronic parts. They have a nitrile coating that protects hands while soldering.

Protect your hands from intermittent exposure to flames and radiant heat up to 2000° F.

Protect your hands from intermittent exposure to extreme heat during jobs such as metal forging and glass manufacturing.

Often used for casting and ceramics production, these cotton gloves are the traditional choice for jobs involving intermittent moderate heat.

Protect your arms against intermittent exposure to flames and radiant heat.

Use these sleeves alone or with gloves to protect your arms from welding sparks and spatter.

Use these sleeves alone or with gloves to protect your arm from oils and most acids.

These gloves meet ANSI/ISEA 105 standards for cut resistance. They are cleaned and bagged in environments with low levels of particulates, so they won't contaminate your work area.

These gloves meet NFPA 70E for protection against arc-flash hazards. They are made with flame-resistant materials and are rated for cut resistance.

These gloves are commonly used in meat packing and other food-service environments. Made of interwoven fabric and stainless steel fibers, they offer cut protection without sacrificing dexterity.

These gloves conform to your hand for improved dexterity. Use them on machine assembly jobs where protection from oil and cuts is essential.

Use these gloves to avoid cuts when working with sharp or pointy objects.

In addition to being reinforced, the palms are coated to protect against punctures from sharp or pointy objects such as needles and syringes.

Use these sleeves alone or with gloves to protect your arms from cuts and punctures when handling sharp objects.

Handle small items when dexterity is essential and full hand coverage isn't needed.

Wear these gloves to keep your hands dry and warm at temperatures as low as -320° F.

Keep fingerprints and other contaminants off of parts during inspections.

The coating on these gloves provides extra protection without limiting dexterity. It also provides a secure grip.

Keep hands warm in temperatures as low as -320° F without sacrificing dexterity. These gloves can be used to handle dry ice.

The coating on these gloves provides extra grip and protection without limiting dexterity. A fluorescent yellow back side makes them easy to spot.

Protect your arm from stains, sparks, and abrasions. Use these sleeves alone or with gloves.

Maintain a secure grip on wet surfaces. These gloves have a lining that safeguards hands from cold objects as well as cold weather.

The all-leather design offers durability and wear resistance.

These face masks are made of an aramid blend that meets NFPA 70E for protection against electrical arc flashes while keeping your head and neck warm.

Stay warm without the bulk of heavy coats and multiple layers. These jackets have a battery-operated heated core.

Stay warm and dry when working in cold, windy conditions.

Thicker and longer than jackets, coats provide better coverage to keep you warm in bitterly cold conditions—down to -50° F.

Also known as cryogenic aprons, these protect against extremely cold materials, such as liquid nitrogen and dry ice.

Protect your neck from heat, sparks, and molten metal splashes. Use the hook and loop tabs to fasten them to a hard hat.

These pants have no pockets, so they won’t trap hot particles when protecting against sparks. They have durable leather belt loops, as well as buttons for suspenders.

These adjustable leggings protect your shins and the top of your feet from heat, sparks, and molten metal splashes. They have pull tabs for quick removal.

Protect your head from electrical arc flashes. These face masks won’t melt or drip when exposed to intermittent flames.

Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2.

Made of a cotton blend, these pants are lightweight and offer better breathability than denim jeans.

Add company names and employee names to your work gear.

Protect sensitive equipment from damage caused by static electricity.

Made of 99% polyester, these knee-length coats repel liquids. Also known as barrier coats.

Made of Kevlar aramid, these aprons protect against incidental contact with hot surfaces.

Wear these coats to protect sensitive equipment from damage caused by static electricity. Coats are knee length.

These beanies are designed for a snug fit and provide good breathability.

An SBR rubber coating repels water and other nonhazardous liquids.

Also known as painters' spray socks, these breathable face masks are often used to protect against paint and dust.

These flame-resistant jackets meet NFPA 70E standards for protection against electrical arc flashes.

Ponchos are spacious for a generous fit, so they can be worn over bulky work clothes or equipment such as backpacks.

Protect against chemical spills and splashes.

Protect against chemical spills and splashes. One-piece coveralls have fewer openings than chemical-resistant rain suits.

Keep dry in wet and rainy conditions. These sturdy coats resist abrasion and mildew and extend past your knees for added protection.

Protect your torso and thighs from heat and sparks when welding.

Snap these bibs onto cape sleeves to provide protection for your stomach from heat and sparks when welding.

These aprons extend past the knees and wrap around each leg, providing better coverage and allowing for better mobility than other aprons.

These abrasion-, tear-, and cut-resistant leggings protect your lower legs and feet against radiant heat, flames, and welding sparks.

These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks.

Bright colors and reflective stripes make workers stand out in low-visibility areas. Jackets cover your hips.

Breathable to keep you cool and comfortable, these pants protect against dirt, grime, and light liquid splashes.

Coveralls provide full body protection against dirt and grime.

Protect the front of your body from dirt, grime, and other materials.

These chaps are designed to meet ASTM F1897 leg protection standards for chain saw users.

These hoods prevent pollutants, such as dust particles and microbes, from contaminating a space.

Choose these bright, reflective pants for high-risk areas and where low visibility is a concern.

A tough Nomex shell resists high temperatures and minor sparks when welding near the water. They are international safety orange to draw attention.

Protect your neck and face from harmful UV rays when wearing a hard hat.

An alternative to disposable face masks, these protective masks can be washed and reused multiple times.

Lightweight and breathable, these shoes provide the protection of a safety shoe with an athletic feel.

Keep dust and other particles on your shoes from contaminating clean rooms.

These covers are lightweight and protect shoes from dirt, grime, and liquid splashes.