Use this shielded sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Often used to protect wire, cable, and hose in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying.

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

Multiple channels let you separate different types of cable and cords.

Use in areas with light pedestrian traffic.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Maintain a supply of tubing in a variety of sizes that withstand abrasion, moisture, and chemicals.

With a rubber housing, these outlet strips withstand drops and other impact.

Protect your mated connections from moisture and light splashing.

Protect plugs and sockets in washdown environments when not in use.

Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion.

Use these pads to protect your hands from intermittent exposure to direct heat when handling hot items.

More impermeable to gas and vapors than other chemical-resistant gloves we carry, these resist esters, ketones (such as acetone), highly corrosive acids, and other hazardous substances.

Often used for cleaning lab spaces, these gloves withstand most acids, alcohols, and cleaning solutions.

Protect objects in your clean room from skin oil and other contaminants when dexterity is essential and full hand coverage is not needed.

ASTM D120 rated for use when handling live electrical equipment, these gloves come tested and marked with the test date. All gloves meet NFPA 70E for protection against arc-flash hazards.

These gloves have a metal additive that will set off metal detectors if they fall into your line, so you can safely handle food and tools in a sanitary facility.

Maintain a secure grip on wet surfaces. These gloves have a lining that safeguards hands from cold objects as well as cold weather.

The accordion design prevents the sleeve from collapsing and allows more air circulation. It stays connected to the glove box so you can quickly change the size or type of glove being used.

Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. Seamless one-piece construction provides maximum strength and integrity.

Also known as firefighters' boots, these meet the NFPA 1971 standard for structural firefighting. They withstand ambient heat up to 500° F.

Boots extend above the ankle to provide more coverage than shoes. They protect your feet against workplace hazards, such as accidental impacts, water, and oil.

These covers protect shoes from water, wear, and abrasion.

Wear over mid-calf and knee-high boots. They protect boots from water, wear, and abrasion.

These gaskets absorb electromagnetic interference (EMI) and radio frequency interference (RFI) to prevent inaccurate signals, flickering displays, and other electrical problems.

With a raised bulb to absorb greater impact than standard corner guards, these guards protect walls, cabinets, and other surfaces.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Commonly used on stair rails, vehicle panels, and heavy equipment, this durable rubber film is tear resistant. Use it to protect metal, wood, plastic, composite, and painted surfaces from damage.

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Designed to withstand impact in high-traffic areas, these stops have an anchor that mounts in a hole and sets with grout. Install them in concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Remove the pin on your door's hinge, slide it through one of these stops, and then insert it back into the hinge to set and adjust the door's opening angle.

A magnetic base makes it easy to attach, move, and replace these bumpers on metal surfaces. Use them for guarding, aligning, and positioning parts.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.