Heat-Shrink Tubing Type Heat-Shrink Tubing Type |
|---|
 |  |
| Tubing | Assortments |
 | |
| No-Heat Tubing |
Performance Properties Performance Properties | Show |
|---|
|
Performance Properties Performance Properties | Hide |
|---|
System of Measurement System of Measurement |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Flexibility Flexibility |
|---|
 | Flexible |
 | Semi-Rigid |
 | Rigid |
Minimum Wall Thickness After Shrinking Minimum Wall ThicknessAfter Shrinking |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Shrink Ratio Shrink Ratio |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Dielectric Strength Dielectric Strength |
|---|
|
|
Clarity Clarity |
|---|
 |  |
| Clear | Semi-Clear |
 | |
| Opaque |
Sleeving Type Sleeving Type |
|---|
 | Spiral Wrap |
About Durometer Hardness Scales
More
About Sleeving
More
About Heat-Shrink Tubing
More
UV-Resistant Spiral Sleeving
This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. Made of polyethylene, it resists abrasion and solvents. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.
Orange sleeving is more visible than black sleeving. Use it to quickly and easily identify lines in outdoor safety applications. It’s also good for color coding and marking.
| ID | Expanded ID | OD | Wall Thick. | Temperature Range, °F | Specifications Met | Choose a Color | 10 ft. | 25 ft. | 50 ft. | 100 ft. | |
Polyethylene Plastic | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/16" | 1/2" | 1/8" | 1/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 1/8" | 1 5/16" | 3/16" | 1/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 3/16" | 2" | 1/4" | 1/32" | -75° to 190° | UL Recognized Component | 00000000 | |||||
| 1/4" | 3" | 3/8" | 1/16" | -75° to 190° | UL Recognized Component | 0000000 | |||||
| 3/8" | 4" | 1/2" | 1/16" | -75° to 190° | UL Recognized Component | 00000000 | |||||
| 1/2" | 4 1/2" | 5/8" | 1/16" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 5/8" | 5" | 3/4" | 1/16" | -75° to 190° | UL Recognized Component | 00000000 | |||||
| 13/16" | 7" | 1" | 3/32" | -75° to 190° | UL Recognized Component | Black | 00000000 | ||||
| 13/16" | 7" | 1" | 3/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 13/16" | 7" | 1" | 3/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 13/16" | 7" | 1" | 3/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 1 1/16" | 8" | 1 1/4" | 3/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
| 1 5/16" | 10" | 1 1/2" | 3/32" | -75° to 190° | UL Recognized Component | Black | 0000000 | ||||
Self-Extinguishing Spiral Sleeving
With a self-extinguishing additive, this sleeving will not produce fumes when exposed to open flame and high temperatures. Made of nylon, it also has good abrasion resistance. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.
UV-resistant sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged.
| ID | Expanded ID | OD | Wall Thick. | Temperature Range, °F | Specifications Met | Color | Each | |
10 ft. Lg. | ||||||||
|---|---|---|---|---|---|---|---|---|
UV-Resistant Nylon Plastic | ||||||||
| 1/16" | 1/2" | 1/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 00000000 | 00000 |
| 3/16" | 2" | 1/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 00000000 | 00000 |
| 5/16" | 3" | 3/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 00000000 | 00000 |
| 7/16" | 4" | 1/2" | 1/32" | -40° to 250° | UL Recognized Component | Black | 00000000 | 00000 |
| 11/16" | 5" | 3/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 00000000 | 00000 |
| 15/16" | 7" | 1" | 1/32" | -40° to 250° | UL Recognized Component | Black | 00000000 | 00000 |
25 ft. Lg. | ||||||||
UV-Resistant Nylon Plastic | ||||||||
| 1/16" | 1/2" | 1/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 3/16" | 2" | 1/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 5/16" | 3" | 3/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 7/16" | 4" | 1/2" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 11/16" | 5" | 3/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 15/16" | 7" | 1" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
50 ft. Lg. | ||||||||
UV-Resistant Nylon Plastic | ||||||||
| 1/16" | 1/2" | 1/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 3/16" | 2" | 1/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 5/16" | 3" | 3/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 7/16" | 4" | 1/2" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 11/16" | 5" | 3/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 000000 |
| 15/16" | 7" | 1" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 000000 |
100 ft. Lg. | ||||||||
UV-Resistant Nylon Plastic | ||||||||
| 1/16" | 1/2" | 1/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 3/16" | 2" | 1/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 00000 |
| 5/16" | 3" | 3/8" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 000000 |
| 7/16" | 4" | 1/2" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 000000 |
| 11/16" | 5" | 3/4" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 000000 |
| 15/16" | 7" | 1" | 1/32" | -40° to 250° | UL Recognized Component | Black | 0000000 | 000000 |
Thin-Wall High-Temperature Heat-Shrink Tubing
- Material: PTFE Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 455 V/mil
- Shrink Temperature: 655° F
- Temperature Range: -450° to 500° F
- Specifications Met: SAE AMS-DTL-23053/12
With thin walls, this tubing shrinks faster than other high-temperature tubing. Made of PTFE, it withstands temperatures up to 500° F and resists abrasion and chemicals. It’s also UV resistant, so it won’t fade in sunlight. This tubing meets SAE AMS-DTL-23053/12 for material quality.
Tubing with a 0.006" – 0.01" minimum wall thickness after shrinking is often used on extremely thin (0.014" - 0.038") guide wire to help maintain the thinness of the wire. It’s also good for splicing fiber optics—it minimizes damage to the fibers.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 4 ft. Lg. | ||||
|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | |
| 0.03" | 0.02" | 0.006" | White | 0000000 | 00000 |
| 0.04" | 0.02" | 0.006" | White | 0000000 | 0000 |
| 0.05" | 0.02" | 0.006" | White | 0000000 | 0000 |
| 0.06" | 0.03" | 0.006" | White | 0000000 | 0000 |
| 0.06" | 0.04" | 0.012" | White | 0000000 | 0000 |
| 0.07" | 0.04" | 0.006" | White | 0000000 | 0000 |
| 0.09" | 0.05" | 0.006" | White | 0000000 | 0000 |
| 0.09" | 0.06" | 0.012" | White | 0000000 | 0000 |
| 0.11" | 0.06" | 0.006" | White | 0000000 | 0000 |
| 0.12" | 0.07" | 0.008" | White | 0000000 | 0000 |
| 0.12" | 0.07" | 0.012" | White | 0000000 | 0000 |
| 0.14" | 0.08" | 0.008" | White | 0000000 | 0000 |
| 0.15" | 0.09" | 0.008" | White | 0000000 | 0000 |
| 0.15" | 0.09" | 0.012" | White | 0000000 | 0000 |
| 0.19" | 0.11" | 0.008" | White | 0000000 | 0000 |
| 0.19" | 0.11" | 0.012" | White | 0000000 | 0000 |
| 0.21" | 0.12" | 0.008" | White | 0000000 | 00000 |
| 0.24" | 0.14" | 0.008" | White | 0000000 | 00000 |
| 0.24" | 0.14" | 0.015" | White | 0000000 | 00000 |
| 0.27" | 0.15" | 0.008" | White | 0000000 | 00000 |
| 0.27" | 0.16" | 0.015" | White | 0000000 | 00000 |
| 0.3" | 0.18" | 0.015" | White | 0000000 | 00000 |
| 0.32" | 0.19" | 0.01" | White | 0000000 | 00000 |
| 0.32" | 0.2" | 0.015" | White | 0000000 | 00000 |
| 0.37" | 0.21" | 0.01" | White | 0000000 | 00000 |
| 0.43" | 0.27" | 0.01" | White | 0000000 | 00000 |
| 0.43" | 0.28" | 0.015" | White | 0000000 | 00000 |
| 0.47" | 0.35" | 0.012" | White | 0000000 | 00000 |
Chemical-Resistant Heat-Shrink Tubing
Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.
PVC plastic tubing is more chemical resistant than rubber. It also resists UV, so it won’t fade or discolor when exposed to sunlight. Store tubing at 70° F or lower to avoid premature shrinkage.
SAE AMS-DTL-23053/1 Class 2, 23053/2 Class 2, and 23053/13 tubing meets requirements for material quality and color.
Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
For technical drawings and 3-D models, click on a part number.
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | |||||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | Pkg. Qty. | Pkg. | |
1/2 ft. Lg. | |||||||
| 0.05" | 0.02" | 0.02" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 0.06" | 0.03" | 0.02" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.13" | 0.06" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.19" | 0.09" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.25" | 0.13" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.38" | 0.19" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.5" | 0.25" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.63" | 0.31" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 0.75" | 0.38" | 0.03" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 1" | 0.5" | 0.04" | 1,000 V/mil | 5 | 00000000 | 0000 | |
| 1.5" | 0.75" | 0.04" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 2" | 1" | 0.05" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 3" | 1.5" | 0.07" | 1,000 V/mil | 5 | 00000000 | 00000 | |
| 4" | 2" | 0.07" | 1,000 V/mil | 3 | 00000000 | 00000 | |
1 ft. Lg. | |||||||
| 0.63" | 0.31" | 0.03" | Not Rated | 5 | 0000000 | 0000 | |
| 0.75" | 0.38" | 0.03" | Not Rated | 5 | 0000000 | 0000 | |
| 1" | 0.5" | 0.04" | Not Rated | 5 | 0000000 | 0000 | |
| 1.5" | 0.75" | 0.04" | Not Rated | 5 | 0000000 | 00000 | |
| 2" | 1" | 0.05" | Not Rated | 3 | 0000000 | 00000 | |
| 3" | 1.5" | 0.07" | Not Rated | 1 | 0000000 | 0000 | |
| 4" | 2" | 0.07" | Not Rated | 1 | 0000000 | 00000 | |
- Shrink Ratio: 2:1
- Dielectric Strength: See Table
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Dielectric Strength | Choose a Color | 5 ft. Lg. | 10 ft. Lg. | 25 ft. Lg. | 50 ft. Lg. | 100 ft. Lg. | 125 ft. Lg. | 250 ft. Lg. | |
| 0.05" | 0.02" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
| 0.06" | 0.03" | 0.02" | 1,000 V/mil | 00000000 | ||||||||
| 0.13" | 0.06" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.19" | 0.09" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.25" | 0.13" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.38" | 0.19" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.5" | 0.25" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.63" | 0.31" | 0.03" | Not Rated | 00000000 | ||||||||
| 0.63" | 0.31" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 0.75" | 0.38" | 0.03" | Not Rated | 00000000 | ||||||||
| 0.75" | 0.38" | 0.03" | 1,000 V/mil | 00000000 | ||||||||
| 1" | 0.5" | 0.04" | Not Rated | 00000000 | ||||||||
| 1" | 0.5" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
| 1.5" | 0.75" | 0.04" | Not Rated | 00000000 | ||||||||
| 1.5" | 0.75" | 0.04" | 1,000 V/mil | 00000000 | ||||||||
| 2" | 1" | 0.05" | Not Rated | 00000000 | ||||||||
| 2" | 1" | 0.05" | 1,000 V/mil | 00000000 | ||||||||
| 3" | 1.5" | 0.07" | Not Rated | 00000000 | ||||||||
| 3" | 1.5" | 0.07" | 1,000 V/mil | 00000000 | ||||||||
| 4" | 2" | 0.07" | Not Rated | 00000000 | ||||||||
| 4" | 2" | 0.07" | 1,000 V/mil | 00000000 | ||||||||
| 5" | 2.5" | 0.08" | Not Rated | 00000000 | ||||||||
Chemical-Resistant Moisture-Seal Heat-Shrink Tubing
- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 1,000 V/mil
- Shrink Temperature: 215° F
- Temperature Range: 0° to 220° F
Made of PVC, this tubing resists chemicals, oil, and solvents. An adhesive lining melts when the tubing is heated and bonds to the underlying surface, creating a water-resistant seal. It resists UV, so it won’t fade or discolor when exposed to sunlight.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 1/2 ft. Lg. | 25 ft. Lg. | 100 ft. Lg. | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Pkg. Qty. | Pkg. | Each | Each | |||
| 0.19" | 0.09" | 0.04" | Black | 5 | 0000000 | 00000 | 0000000 | 000000 | 0000000 | 000000 |
| 0.25" | 0.13" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.38" | 0.19" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.5" | 0.25" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 0.75" | 0.38" | 0.04" | Black | 5 | 0000000 | 0000 | 0000000 | 00000 | 0000000 | 000000 |
| 1" | 0.5" | 0.05" | Black | 5 | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 000000 |
Tight-Fit Chemical-Resistant Heat-Shrink Tubing
- Material: PVC Plastic
- Shrink Ratio: 2:1
- Dielectric Strength: 2,000 V/mil
- Shrink Temperature: 285° F
- Temperature Range: 0° to 210° F
- Specifications Met: Flame Rated VW-1, UL Recognized Component
Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. Made of PVC, it has excellent resistance to chemicals, oil, and acids. It also resists UV, so it won't fade or discolor when exposed to sunlight. All are flame rated VW-1, so this tubing meet requirements for preventing the spread of flames based on a timed test with vertically suspended material.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
For technical drawings and 3-D models, click on a part number.
ID | 25 ft. Lg. | 100 ft. Lg. | |||||
|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Color | Each | Each | ||
| 0.48" | 0.26" | 0.004" | White | 0000000 | 00000 | 0000000 | 000000 |
| 0.6" | 0.33" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 0.85" | 0.47" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 0.91" | 0.5" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.04" | 0.57" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.13" | 0.62" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.2" | 0.66" | 0.004" | White | 0000000 | 0000 | 0000000 | 00000 |
| 1.45" | 0.8" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
| 1.6" | 0.88" | 0.004" | White | 0000000 | 00000 | 0000000 | 00000 |
Harsh Environment Heat-Shrink Tubing Assortments
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
- Shrink Ratio: 2:1
- Shrink Temperature: 215° F
- Chemical Resistant, UV Resistant
| Includes | Number of Pieces | Lg., ft. | Color | Each | |
| 0.09"-0.38" ID Before Shrinking of PVC (5 sizes) | 175 | 1/2 | Black | 000000 | 000000 |
- Shrink Ratio: 2:1
- Shrink Temperature: 215° F
- Chemical Resistant, UV Resistant
Mounting | ||||||||
|---|---|---|---|---|---|---|---|---|
| Includes | No. of Spools | Type | No. of Holes | Hole Dia. | Fasteners Included | Color | Each | |
| 0.06" ID Before Shrinking of PVC (100 feet) 0.13", 0.19", 0.25", 0.38" ID Before Shrinking of PVC (25 feet each) | 5 | Screw On | 2 | 1/4" | No | Black | 000000 | 0000000 |
| Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temperature, °F | Features | Color | Each | |
| 0.06"-0.75" ID Before Shrinking of PVC (6 sizes) | 100 | 1/2ft. | 2:1 | 215° | Chemical Resistant, UV Resistant | Black | 000000 | 000000 |
No-Heat Shrink Tubing
- Material: EPDM Rubber
- Shrink Ratio: See Table
- Dielectric Strength: 365 V/mil
- Temperature Range: -40° to 190° F
- Specifications Met: ANSI C119.1, CE Marked
Create a permanent seal without applying heat. Also known as cold-shrink tubing, this tubing has a removable spiral-wound core. Slide the tubing over wire and cable and pull out the core. When the core is removed, the tubing contracts and conforms to the underlying cable. The length shrinks by several inches. Made of EPDM rubber, it resists chemicals including acids, alkalies, and ozone. Resistant to UV, it won’t fade or discolor when exposed to sunlight. It meets ANSI C119.1 for water seal requirements and can be submerged.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.
ID | Lg. | |||||||
|---|---|---|---|---|---|---|---|---|
| Before Shrinking | Min. After Shrinking | Shrink Ratio | Before Shrinking | Max. Covered | For Max. Voltage | Color | Each | |
| 0.82" | 0.1" | 2:1 | 8" | 3" | 1,000V AC | Black | 0000000 | 000000 |
| 0.94" | 0.4" | 2:1 | 8" | 3" | 1,000V AC | Black | 0000000 | 00000 |
| 1.18" | 0.55" | 2:1 | 9" | 5" | 1,000V AC | Black | 0000000 | 00000 |
| 1.18" | 0.55" | 2:1 | 11" | 7" | 1,000V AC | Black | 0000000 | 00000 |
| 1.38" | 0.67" | 2:1 | 6" | 2" | 1,000V AC | Black | 0000000 | 00000 |
| 1.38" | 0.67" | 2:1 | 12" | 8" | 1,000V AC | Black | 0000000 | 00000 |
| 1.38" | 0.67" | 2:1 | 16" | 12" | 1,000V AC | Black | 0000000 | 00000 |
| 1.94" | 0.95" | 2:1 | 6" | 2" | 1,000V AC | Black | 0000000 | 00000 |
| 1.94" | 0.95" | 2:1 | 12" | 8" | 1,000V AC | Black | 0000000 | 00000 |
| 1.94" | 0.95" | 2:1 | 18" | 14" | 1,000V AC | Black | 0000000 | 00000 |
| 2.67" | 1.27" | 2:1 | 6" | 2" | 1,000V AC | Black | 0000000 | 00000 |
| 2.67" | 1.27" | 2:1 | 9" | 5" | 1,000V AC | Black | 0000000 | 00000 |
| 2.67" | 1.27" | 2:1 | 18" | 14" | 1,000V AC | Black | 0000000 | 00000 |
Raised-Bulb Surface Guards
The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact. All of these guards have a hard rating to withstand high levels of impact. They can be used outdoors. Mount them with fasteners.
EPDM guards are more abrasion resistant than vinyl guards. They are also UV, ozone, and chemical resistant.
Vinyl guards are chemical resistant.
Optional angle bumpers mount with screws after drilling holes. They can also be nailed down.
Mounting Flange | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Lg., ft. | Thick. | Nonmarking | For Use Outdoors | Hardness Rating | Hardness | Temp. Range, °F | Wd. | Thick. | Performance Properties | Each | ||
EPDM Rubber—Black | |||||||||||||
| 1 | 2 5/8" | 6 | 1 1/4" | No | Yes | Hard | Durometer 70A | -30° to 200° | 5/8" | 1/4" | UV Resistant | 0000000 | 000000 |
| 1 | 2 5/8" | 12 | 1 1/4" | No | Yes | Hard | Durometer 70A | -30° to 200° | 5/8" | 1/4" | UV Resistant | 0000000 | 000000 |
| 1 | 3 5/8" | 6 | 1 3/8" | No | Yes | Hard | Durometer 70A | -30° to 200° | 3/4" | 1/4" | UV Resistant | 0000000 | 00000 |
| 1 | 4 1/8" | 6 | 1 1/2" | No | Yes | Hard | Durometer 70A | -30° to 200° | 1" | 1/4" | UV Resistant | 0000000 | 00000 |
Vinyl Plastic—Black | |||||||||||||
| 3 | 3" | 8 | 2" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 1" | 5/32" | UV Resistant | 00000000 | 00000 |
| 3 | 3 1/4" | 8 | 3" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 2" | 3/16" | UV Resistant | 00000000 | 00000 |
| 3 | 3 5/8" | 8 | 2 3/8" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 1 1/4" | 3/16" | UV Resistant | 00000000 | 00000 |
| 4 | 3 3/4" | 8 | 1" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 3/4" | 3/16" | UV Resistant | 00000000 | 00000 |
| 4 | 4 3/4" | 8 | 1 5/16" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 7/8" | 1/4" | UV Resistant | 00000000 | 00000 |
| 5 | 3 1/2" | 8 | 1 3/8" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 7/8" | 5/32" | UV Resistant | 00000000 | 00000 |
Vinyl Plastic—Gray | |||||||||||||
| 3 | 3" | 8 | 2" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 1" | 5/32" | UV Resistant | 00000000 | 00000 |
| 4 | 3 3/4" | 8 | 1" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 3/4" | 3/16" | UV Resistant | 00000000 | 00000 |
| 4 | 4 3/4" | 8 | 1 5/16" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 7/8" | 1/4" | UV Resistant | 00000000 | 00000 |
| 5 | 3 1/2" | 8 | 1 3/8" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 7/8" | 5/32" | UV Resistant | 00000000 | 00000 |
Vinyl Plastic—White | |||||||||||||
| 3 | 3" | 8 | 2" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 1" | 5/32" | UV Resistant | 00000000 | 00000 |
| 3 | 3 1/4" | 8 | 3" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 2" | 3/16" | UV Resistant | 00000000 | 00000 |
| 4 | 4 3/4" | 8 | 1 5/16" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 7/8" | 1/4" | UV Resistant | 00000000 | 00000 |
| 5 | 3 1/2" | 8 | 1 3/8" | Yes | Yes | Hard | Durometer 80A | 40° to 110° | 7/8" | 5/32" | UV Resistant | 00000000 | 00000 |
| Mount Type | Lg. | Ht. | Thick. | Nonmarking | For Use Outdoors | Hardness Rating | Hardness | Temp. Range, °F | Performance Properties | Each | ||
Vinyl Plastic—Black | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Style 3 | Drill-Your-Own Hole | 8 1/2" | 3 5/8" | 1 1/4" | Yes | Yes | Hard | Durometer 85A | 0 to 120° F | UV Resistant | 00000000 | 000000 |
Vinyl Plastic—Gray | ||||||||||||
| For Style 3 | Drill-Your-Own Hole | 8 1/2" | 3 5/8" | 1 1/4" | Yes | Yes | Hard | Durometer 85A | 0 to 120° F | UV Resistant | 00000000 | 00000 |
Vinyl Plastic—White | ||||||||||||
| For Style 3 | Drill-Your-Own Hole | 8 1/2" | 3 5/8" | 1 1/4" | Yes | Yes | Hard | Durometer 85A | 0 to 120° F | UV Resistant | 00000000 | 00000 |
Angle Bumpers
These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. All have a hard rating to withstand high levels of impact. They are nonmarring and can be used outdoors.
Unthreaded-hole bumpers mount with screws. Drill-your-own hole bumpers mount with screws after drilling holes. They can also be nailed down.
Plastic bumpers are chemical resistant. Vinyl plastic bumpers resist solvents. Polyurethane foam bumpers resist abrasion better than plastic or vinyl plastic bumpers.
UV-resistant bumpers won’t dry out and become brittle when exposed to UV rays.
Mounting Hole | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Ht. | Thick. | Counterbore Dia. | Dia. | Ctr.-to-Ctr. | Temp. Range, °F | For Use Outdoors | Hardness Rating | Hardness | Nonmarking | Color | Performance Properties | Each | ||
Unthreaded Hole | |||||||||||||||
Plastic | |||||||||||||||
| 1 | 6 1/4" | 2 1/2" | 1 1/2" | 3/4" | 1/4" | 2 1/2" | -20° to 200° | Yes | Hard | Durometer 70A | Yes | White | UV Resistant | 000000000 | 000000 |
| 1 | 6 1/4" | 2 1/2" | 1 1/2" | 3/4" | 1/4" | 2 1/2" | -20° to 200° | Yes | Hard | Durometer 70A | Yes | Black | UV Resistant | 000000000 | 00000 |
Polyurethane Foam | |||||||||||||||
| 2 | 7" | 7" | 7" | 1 1/8" | 3/8" | 3" | -10° to 140° | Yes | Hard | Durometer 70A | Yes | Black | UV Resistant | 000000000 | 000000 |
| 2 | 12" | 4 1/4" | 2 1/4" | 1" | 3/8" | 7 1/4" | -10° to 140° | Yes | Hard | Durometer 70A | Yes | Gray | UV Resistant | 000000000 | 00000 |
| 2 | 12" | 4 1/4" | 2 1/4" | 1" | 3/8" | 7 1/4" | -10° to 140° | Yes | Hard | Durometer 70A | Yes | Black | UV Resistant | 000000000 | 00000 |
Drill-Your-Own Hole | |||||||||||||||
Vinyl Plastic | |||||||||||||||
| 4 | 8 1/2" | 3 5/8" | 1 1/4" | __ | __ | __ | 0° to 120° | Yes | Hard | Durometer 85A | Yes | White | UV Resistant | 00000000 | 00000 |
| 4 | 8 1/2" | 3 5/8" | 1 1/4" | __ | __ | __ | 0° to 120° | Yes | Hard | Durometer 85A | Yes | Gray | UV Resistant | 00000000 | 00000 |
| 4 | 8 1/2" | 3 5/8" | 1 1/4" | __ | __ | __ | 0° to 120° | Yes | Hard | Durometer 85A | Yes | Black | UV Resistant | 00000000 | 00000 |