McMaster-Carr logo
    Filter by
    Thickness
    System of Measurement
    Material Thickness
    Screw Size
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Industrial Info Compare
    Temper Rating
    Sold As
    Specifications Met
    Industrial Info Compare
    Backing Type
    Shim Trade Size
    Heat Treatment
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    131 Products

    Shims

    Image of Product. Front orientation. Shims. Round, Sold Individually.
    With thickness tolerances as fine as a strand of hair, these shims precisely align, space, and level components on shafts, arbors, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, these shims won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Carbon Steel—Best for dry environments since moisture will cause these shims to rust.
    Brass—With a warm, polished look, these shims are often chosen for their appearance. Similar to 18-8 stainless steel, brass is corrosion resistant enough to stand up to wet environments.
    Thk.
    Thk. Tolerance
    ID
    Tolerance
    OD Tolerance
    Min.
    Hardness
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    1/32" ID × 7/64" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A909000000
     
    3/64" ID × 1/8" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A92900000
     
    1/16" ID × 5/32" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A94900000
     
    5/64" ID × 5/32" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A01200000
     
    3/32" ID × 13/64" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A21200000
     
    1/8" ID × 3/16" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A0230000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A31200000
     
    3/16" ID × 1/4" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A0240000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A41200000
     
    1/4" ID × 3/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A4860000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A51200000
     
    5/16" ID × 1/2" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A61200000
     
    11/32" ID × 13/16" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A4890000
     
    3/8" ID × 9/16" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A71200000
     
    3/8" ID × 5/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A4910000
     
    1/2" ID × 3/4" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A49400000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B702599040A81200000
     
    5/8" ID × 1" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A49700000
     
    3/4" ID × 1 1/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A5000000
     
    7/8" ID × 1 3/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A5030000
     
    1" ID × 1 1/2" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401098126A50600000
     
    1 1/8" ID × 1 5/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A50900000
     
    1 1/4" ID × 1 3/4" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A51200000
     
    1 3/8" ID × 1 7/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A51500000
     
    1 1/2" ID × 2 1/8" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A51800000
     
    1 3/4" ID × 2 3/4" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A5210000
     
    2" ID × 2 3/4" OD
    0.012"-0.002" to 0.002"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240598126A52400000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    3/32" ID × 13/64" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A33900000
     
    1/8" ID × 3/16" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A8770000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A42900000
     
    3/16" ID × 1/4" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A240597022A8780000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A52900000
     
    1/4" ID × 3/8" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A0020000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A62900000
     
    5/16" ID × 1/2" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A72900000
     
    11/32" ID × 13/16" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A0050000
     
    3/8" ID × 9/16" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A82900000
     
    3/8" ID × 5/8" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A0080000
     
    1/2" ID × 3/4" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A0110000
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B901090917A92900000
     
    5/8" ID × 1" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A01400000
     
    3/4" ID × 1 1/8" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A01600000
     
    7/8" ID × 1 3/8" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A01900000
     
    1" ID × 1 1/2" OD
    0.012"-0.0015" to 0.0015"0" to 0.011"-0.002" to 0.002"Rockwell B70ASTM A2401097022A02200000
     
    Carbon Steel
     
    1/4" ID × 3/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A33900000
     
    11/32" ID × 13/16" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A77700000
     
    3/8" ID × 5/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3410000
     
    1/2" ID × 3/4" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3420000
     
    5/8" ID × 1" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3430000
     
    3/4" ID × 1 1/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3440000
     
    7/8" ID × 1 3/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3450000
     
    1" ID × 1 1/2" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3460000
     
    1 1/8" ID × 1 5/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3470000
     
    1 1/4" ID × 1 3/4" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A3480000
     
    1 3/8" ID × 1 7/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A34900000
     
    1 1/2" ID × 2 1/8" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A35100000
     
    1 3/4" ID × 2 3/4" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A35200000
     
    2" ID × 2 3/4" OD
    0.012"-0.00075" to 0.00075"0" to 0.011"-0.002" to 0.002"Rockwell B65103088A35300000
     
    Brass
     
    3/32" ID × 13/64" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A2090000
     
    1/8" ID × 3/16" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A3090000
     
    3/16" ID × 1/4" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A4090000
     
    1/4" ID × 3/8" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A50900000
     
    5/16" ID × 1/2" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A60900000
     
    3/8" ID × 9/16" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A70900000
     
    1/2" ID × 3/4" OD
    0.012"-0.001" to 0.001"0" to 0.005"-0.005" to 0.005"Rockwell B701093268A80900000
     

    Shim Stock

    Image of Product. Front orientation. Shim Stock. Sold Individually.
    Cut into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, it won't degrade when exposed to harsh weather, salt water, and most chemicals.
    High-Strength 17-7 PH Stainless Steel—Similar in strength to steel, it won’t rust in wet and outdoor areas but can’t withstand harsh chemicals like 316 stainless steel.
    Extreme-Strength 17-4 PH Stainless Steel—Stronger than 17-7 PH stainless steel, it won’t rust in wet and outdoor areas but can’t withstand harsh chemicals like 316 stainless steel.
    Carbon Steel—Best for dry areas since moisture will cause it to rust.
    Stress-Resistant Spring Steel—Harder and holds its shape better than carbon steel. Use it for high-stress applications, such as leveling heavy machinery. It's best for dry areas since moisture will cause it to rust.
    Brass—Picked for its warm, polished look. Similar to 18-8 stainless steel, it resists rusting in wet and outdoor areas.
    Titanium—Grade 2 titanium, 99% pure, is often used in chemical-processing plants for its resistance to strong acids and other harsh chemicals. It has a high strength-to-weight ratio.
    Ultra-Chemical-Resistant PTFE—The most chemical-resistant shim stock we offer, it stands up to the widest range of harsh acids, bases, solvents, and corrosive cleaners, even at temperatures up to 500° F. It also won't mar delicate surfaces.
    Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.
    Thk.
    Thk. Tolerance
    Temper
    Rating
    Color
    Type
    Certificate
    Form
    Specs. Met
    Form
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    6" Wide × 25" Long
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet19014K811000000
     
    6" Wide × 50" Long
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll19502K4800000
    0.012"-0.0006" to 0.0006"1/2 HardMaterial CertificatePaperASTM A666Roll12316K1900000
     
    6" Wide × 100" Long
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll153755K4100000
     
    8" Wide × 12" Long
    0.012"-0.0006" to 0.0006"1/2 HardMaterial CertificatePaperASTM A666Sheet12316K33600000
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet19011K81900000
     
    12" Wide × 50" Long
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll19506K4100000
     
    12" Wide × 100" Long
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Roll19784K22000000
     
    24" Wide × 24" Long
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet19011K61900000
     
    24" Wide × 50" Long
    0.012"-0.001" to 0.001"Full HardMaterial CertificatePaperASTM A666, SAE AMS5906, SAE AMS5913Sheet19784K91000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    6" Wide × 50" Long
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll19548K16500000
     
    6" Wide × 100" Long
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Roll19548K712000000
     
    8" Wide × 12" Long
    0.012"-0.0005" to 0.0005"Material CertificatePaperASTM A240, SAE AMS5507, SAE AMS5524Sheet12317K5800000
     
    12" Wide × 50" Long
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A666, SAE AMS5507, SAE AMS5524Roll19548K714000000
     
    12" Wide × 120" Long
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Roll19548K732000000
     
    24" Wide × 24" Long
    0.012"-0.0005" to 0.0005"Material CertificatePaperASTM A240, ASTM A666, SAE AMS5507, SAE AMS5524Sheet12317K38000000
     
    High-Strength 17-7 PH Stainless Steel
     
    6" Wide × 50" Long
    0.012"-0.0006" to 0.0006"Full HardMaterial CertificatePaperASTM A693Roll12325K1800000
     
    Extreme-Strength 17-4 PH Stainless Steel
     
    4" Wide × 60" Long
    0.012"-0.0006" to 0.0006"Material CertificatePaperASTM A693Roll13723T47000000
     
    Carbon Steel
     
    6" Wide × 25" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperASTM A109Sheet19011K1470000
     
    6" Wide × 50" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperRoll19500K55300000
     
    6" Wide × 100" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperRoll19500K20500000
     
    6" Wide × 180" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperRoll19500K70800000
     
    8" Wide × 12" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperASTM A109Sheet59011K28100000
     
    12" Wide × 120" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperRoll19500K40600000
     
    24" Wide × 24" Long
    0.012"-0.00075" to 0.00075"Full HardMaterial CertificatePaperASTM A109Sheet19011K18300000
     
    Stress-Resistant Spring Steel
     
    6" Wide × 12" Long
    0.012"-0.0008" to 0.0008"Full HardMaterial CertificatePaperASTM A684, SAE AMS5122Sheet19014K14100000
     
    6" Wide × 25" Long
    0.012"-0.0008" to 0.0008"Full HardMaterial CertificatePaperASTM A684, SAE AMS5122Sheet19014K61100000
     
    6" Wide × 50" Long
    0.012"-0.0008" to 0.0008"Full HardMaterial CertificatePaperASTM A682, ASTM A684, MIL-S-7947Roll19503K3900000
     
    8" Wide × 12" Long
    0.012"-0.0008" to 0.0008"Full HardMaterial CertificatePaperASTM A684, SAE AMS5122Sheet19014K16200000
     
    12" Wide × 48" Long
    0.012"-0.0008" to 0.0008"Full HardMaterial CertificatePaperASTM A684, SAE AMS5122Sheet19014K1900000
     
    Brass
     
    6" Wide × 25" Long
    0.012"-0.0012" to 0.0012"1/2 HardMaterial CertificatePaperASTM B36Sheet19014K21100000
     
    6" Wide × 50" Long
    0.012"-0.0012" to 0.0012"1/2 HardMaterial CertificatePaperASTM B36Roll19504K33100000
     
    6" Wide × 60" Long
    0.012"-0.0012" to 0.0012"1/2 HardMaterial CertificatePaperASTM B36Roll19504K5500000
     
    6" Wide × 100" Long
    0.012"-0.0012" to 0.0012"1/2 HardMaterial CertificatePaperASTM B36Roll19501K5300000
     
    8" Wide × 12" Long
    0.012"-0.0012" to 0.0012"1/2 HardMaterial CertificatePaperASTM B36Sheet19011K80100000
     
    12" Wide × 120" Long
    0.012"-0.0012" to 0.0012"1/2 HardMaterial CertificatePaperASTM B36Roll19299K52000000
     
    Titanium
     
    6" Wide × 50" Long
    0.012"-0.001" to 0.001"Material CertificatePaperASTM B265Roll15747T36000000
     
    12" Wide × 50" Long
    0.012"-0.001" to 0.001"Material CertificatePaperASTM B265Roll15747T46000000
     
    Ultra-Chemical-Resistant PTFE
     
    8" Wide × 12" Long
    0.012"-0.0012" to 0.0012"WhiteASTM D3308, MIL-P-22241Sheet11192N53600000
     

    Slotted Shims

    Image of ProductInUse. Front orientation. Shims. Precision Adjust, Slot, Sold Individually.
    Image of Product. Front orientation. Shims. Precision Adjust, Slot, Sold Individually, Tab End.

    Tab End

    Slip these shims around existing mounting fasteners to precisely align and level components such as pumps, compressors, and gearboxes with motors, all without disassembling them. They’re also good for leveling machines on uneven surfaces. To reduce sizing errors, these shims are either labeled with their thickness so there's no need to measure or color coded by thickness to quickly spot the right size.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Insertion Tools—Ease shim insertion and removal, keeping your fingers clear in the process.
    Shims
    Insertion Tools
    Slot
    Each
    Thk.
    Thk. Tolerance
    For Max.
    Screw Size
    Wd.
    Dp.
    Min.
    Hardness
    Identification
    Type
    End
    Shape
    1-9
    10-Up
    Each
    18-8 Stainless Steel
     
    1 1/2" Lg. × 1 1/2" Wd. (Shim Trade Size AA)
    0.012"-0.0006" to 0.0006"3/8"
    7/16"61/64"Rockwell C42LabeledTab97235K382000000000097235K900000
     
    2" Lg. × 2" Wd. (Shim Trade Size A)
    0.012"-0.0006" to 0.0006"1/2"
    9/16"1 9/32"Rockwell C42LabeledTab9722K3850000000097235K9150000
     
    2 1/2" Lg. × 2 1/2" Wd. (Shim Trade Size BB)
    0.012"-0.0006" to 0.0006"5/8"
    11/16"1 19/32"Rockwell C42LabeledTab97235K3880000000097235K9150000
     
    3" Lg. × 3" Wd. (Shim Trade Size B)
    0.012"-0.0006" to 0.0006"3/4"
    13/16"1 29/32"Rockwell C42LabeledTab9722K3720000000097235K930000
     
    4" Lg. × 4" Wd. (Shim Trade Size C)
    0.012"-0.0006" to 0.0006"1 1/8"
    1 3/16"2 19/32"Rockwell C42LabeledTab9722K1650000000097235K930000
     
    5" Lg. × 5" Wd. (Shim Trade Size D)
    0.012"-0.0006" to 0.0006"1 1/2"
    1 9/16"3 9/32"Rockwell C42LabeledTab9722K1380000000097235K9450000
     
    6" Lg. × 6" Wd. (Shim Trade Size E)
    0.012"-0.0006" to 0.0006"1 7/8"
    1 15/16"4"Rockwell C42LabeledTab97235K4020000000097235K960000
     
    6" Lg. × 6" Wd. (Shim Trade Size G)
    0.012"-0.0006" to 0.0006"2 1/4"
    2 5/16"4 3/16"Rockwell C42LabeledTab97235K4050000000097235K960000
     
    8" Lg. × 8" Wd. (Shim Trade Size H)
    0.012"-0.0006" to 0.0006"2 1/4"
    2 5/16"5 3/16"Rockwell C42LabeledTab97235K4080000000097235K9850000
     

    Adhesive-Back Shim Stock

    Image of Product. Front orientation. Shim Stock. Adhesive-Back Shim Stock.
    Stick with confidence—a durable adhesive keeps this shim stock from sliding out of place. Cut the shim stock into custom shapes to create shims that suit your needs. With thickness tolerances as fine as a strand of hair, the shims will precisely align, space, and level components on dies, presses, and machinery.
    18-8 Stainless Steel—The choice for wet and outdoor areas because it resists rust. However, it will corrode or pit when exposed to salt water and chemicals.
    Super-Corrosion-Resistant 316 Stainless Steel—Superior to 18-8 stainless steel, it won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Aluminum—An alternative to stainless steel for rust resistance but less hard so it may not retain its shape. One-third the weight of steel, it's often used in robotics and automation.
    Brass—Picked for its warm, polished look. Similar to 18-8 stainless steel, it resists rusting in wet and outdoor areas.
    Temper Rating—Choose half hard to create shims that you’ll need to bend or shape. Opt for full hard to make stronger shims that will maintain their shape under loads.
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Certificate
    Thk.
    Thk. Tolerance
    Material
    Thk.
    Adhesive
    Thk.
    Adhesive
    Type
    Temper
    Rating
    Type
    Form
    Specs.
    Met
    Form
    Each
    18-8 Stainless Steel
     
    8" Wide × 12" Long
    0.012"-0.0005" to 0.0005"0.01"0.002"AcrylicFull HardMaterial CertificateDigitalASTM A666Sheet2951N219000000
     
    Super-Corrosion-Resistant 316 Stainless Steel
     
    8" Wide × 12" Long
    0.012"-0.0005" to 0.0005"0.01"0.002"AcrylicMaterial CertificateDigitalASTM A666Sheet2951N34600000
     
    Aluminum
     
    6" Wide × 12" Long
    0.012"-0.001" to 0.001"0.01"0.002"AcrylicMaterial CertificateDigitalASTM B209Sheet2951N24500000
     
    Brass
     
    8" Wide × 12" Long
    0.012"-0.001" to 0.001"0.01"0.002"Acrylic1/2 HardMaterial CertificateDigitalASTM B36Sheet2951N23200000
     

    Wave Spring Lock Washers

    Image of Product. Front orientation. Lock Washers. Wave Washer, Spring Lock Washer.
    The wavy shape flexes like a spring to keep nuts and screws secure on slightly uneven surfaces. These washers add a small amount of tension to stop fasteners from backing out due to mild vibration. While they don't hold as well as other lock washers, they do grip slightly better than curved washers. They work best in electrical panels, light fixtures, and other light duty assemblies. Since these washers hold their shape when untightened, you can reuse them a handful of times without losing strength.
    Steel—Best for dry environments since moisture will cause these washers to rust.
    3 Wave—More points of contact than single-wave washers for a better grip.
    For Screw Size
    No. of
    Waves
    ID
    OD
    Thk.
    Overall
    Ht.
    Pkg.
    Qty.
    Pkg.
    Steel
    No. 6, No. 7, No. 8
    30.159"0.375"0.012"0.055"5090134A007000000
    No. 8
    10.193"0.359"0.012"0.060"1096697A4000000
     

    Shims for Keyed Shafts

    With a notch or tab, these shims fit snugly on keyed shafts to align and space gears, sprockets, and bearings. On keyed arbors, they’re often used to accurately space saw blades and cutters.
    You can stack multiple shims to achieve your exact thickness, but stacking more than four may cause them to shift. Remember, fewer shims are better, so a couple of thicker shims are more stable than a bunch of thin shims.
    Notch
    Image of Product. Front orientation. Shims. For Keyed Shafts, Sold Individually, Round, Notch.
    Fit these shims around keyed shafts and arbors that have a key inserted. They’re often referred to as arbor spacers.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these shims resist rust. However, they’ll corrode or pit when exposed to salt water and chemicals.
    Notch
    Thk.
    Thk. Tolerance
    ID
    ID
    Tolerance
    OD
    OD Tolerance
    Wd.
    Dp.
    Min.
    Hardness
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
     
    For 3/4" Diameter Shafts
    0.012"-0.002" to 0.002"3/4"0" to 0.011"1 1/8"-0.002" to 0.002"3/16"5/64"Rockwell B801098116A400000000
     
    For 7/8" Diameter Shafts
    0.012"-0.002" to 0.002"7/8"0" to 0.011"1 3/8"-0.002" to 0.002"3/16"5/64"Rockwell B801098116A40300000
     
    For 1" Diameter Shafts
    0.012"-0.002" to 0.002"1"0" to 0.011"1 1/2"-0.002" to 0.002"1/4"3/32"Rockwell B801098116A40600000
     
    For 1 1/4" Diameter Shafts
    0.012"-0.002" to 0.002"1 1/4"0" to 0.011"1 3/4"-0.002" to 0.002"5/16"1/8"Rockwell B80598116A4090000
     
    For 1 1/2" Diameter Shafts
    0.012"-0.002" to 0.002"1 1/2"0" to 0.011"2 1/8"-0.002" to 0.002"3/8"5/32"Rockwell B80598116A41200000
     
    For 2" Diameter Shafts
    0.012"-0.002" to 0.002"2"0" to 0.011"2 3/4"-0.002" to 0.002"1/2"3/16"Rockwell B80598116A41500000
     
    back to top