System of Measurement System of Measurement |
|---|
|
OD OD |
|---|
|
|
|
Thickness Thickness | Show |
|---|
|
Thickness Thickness | Hide |
|---|
Material Material |
|---|
|
|
Shape Shape |
|---|
 |  |
| Ring | Sheet and Bar |
 |  |
| Made to Order | Keyed |
Individual/Set Individual/Set |
|---|
|
Magnetic Properties Magnetic Properties |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Finish Finish |
|---|
|
Specifications Met Specifications Met |
|---|
|
Shim Stock Form Shim Stock Form |
|---|
| Sheet |
Washer Type Washer Type |
|---|
 | Angled Edge |
Temper Rating Temper Rating |
|---|
|
Don't see the shim stock you need? Just tell us what you're looking for and we'll get it for you.
About Washers
More
Ring Shims
Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
Stainless steel shims are more corrosion resistant than steel shims.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
0.048" Thick. (-0.0035" to 0.0035" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/4" | 0" to 0.011" | 3/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
| 11/32" | 0" to 0.011" | 13/16" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
| 3/8" | 0" to 0.011" | 5/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
| 1/2" | 0" to 0.011" | 3/4" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 0000 |
| 5/8" | 0" to 0.011" | 1" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
| 3/4" | 0" to 0.011" | 1 1/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
| 7/8" | 0" to 0.011" | 1 3/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 10 | 000000000 | 00000 |
| 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 0000 |
| 1 1/8" | 0" to 0.011" | 1 5/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 00000 |
| 1 1/4" | 0" to 0.011" | 1 3/4" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 0000 |
| 1 3/8" | 0" to 0.011" | 1 7/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 00000 |
| 1 1/2" | 0" to 0.011" | 2 1/8" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 5 | 000000000 | 00000 |
| 1 3/4" | 0" to 0.011" | 2 3/4" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 1 | 000000000 | 0000 |
| 2" | 0" to 0.011" | 2 3/4" | -0.002" to 0.002" | 18-8 Stainless Steel | Rockwell B70 | ASTM A240 | 1 | 000000000 | 0000 |
Wide-Rim Ring Shims
Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts. Use them to precisely align, level, and adjust spacing on shafts and machinery.
Stainless steel shims are more corrosion resistant than carbon steel shims.
316 stainless steel shims have the best corrosion resistance of our stainless steel shims.
Carbon steel shims have excellent strength and can be welded.
A zinc-plated finish adds a layer of corrosion resistance.
For technical drawings and 3-D models, click on a part number.
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.048" Thick. (-0.007" to 0.007" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 0.01" to 0.025" | 7/8" | -0.01" to 0.01" | 316 Stainless Steel | Rockwell B38 | May Be Mildly Magnetic | 10 | 00000000 | 000000 |
| 5/8" | 0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | 316 Stainless Steel | Rockwell B38 | May Be Mildly Magnetic | 10 | 00000000 | 00000 |
| 3/4" | 0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | 316 Stainless Steel | Rockwell B38 | May Be Mildly Magnetic | 5 | 00000000 | 00000 |
| 1" | 0.01" to 0.025" | 2" | -0.01" to 0.01" | 316 Stainless Steel | Rockwell B38 | May Be Mildly Magnetic | 5 | 00000000 | 00000 |
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.048" Thick. (-0.007" to 0.007" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | -0.01" to 0.025" | 7/8" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B20 | May Be Mildly Magnetic | 5 | 000000000 | 000000 |
| 9/16" | 0.01" to 0.025" | 1" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B38 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| 5/8" | -0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B20 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 3/4" | -0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B20 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 3/4" | -0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B20 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 1" | -0.01" to 0.025" | 2" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B20 | May Be Mildly Magnetic | 1 | 000000000 | 0000 |
| 1" | 0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | 18-8 Stainless Steel | Rockwell B38 | May Be Mildly Magnetic | 5 | 000000000 | 0000 |
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.048" Thick. (-0.006" to 0.006" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 0.01" to 0.025" | 7/8" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 9/16" | 0.01" to 0.025" | 1" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 5/8" | 0.01" to 0.025" | 1" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 5/8" | 0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 3/4" | 0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 3/4" | 0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 7/8" | 0.01" to 0.025" | 1 3/8" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 7/8" | 0.01" to 0.025" | 1 3/4" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1" | 0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1" | 0.01" to 0.025" | 2" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 1 1/8" | 0.01" to 0.025" | 1 3/4" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1 1/4" | 0.01" to 0.025" | 1 7/8" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 1 1/4" | 0.01" to 0.025" | 2 1/4" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 1 3/8" | 0.01" to 0.025" | 2 1/8" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 1 1/2" | 0.01" to 0.025" | 2 1/4" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 1 1/2" | 0.01" to 0.025" | 3" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 10 | 000000000 | 0000 |
| 1 3/4" | 0.01" to 0.025" | 2 1/2" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 2" | 0.01" to 0.025" | 3 1/2" | -0.01" to 0.01" | 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 5 | 000000000 | 00000 |
| ID | ID Tolerance | OD | OD Tolerance | Material | Min. Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.048" Thick. (-0.006" to 0.006" Tolerance) | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 0.01" to 0.025" | 7/8" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 00000 |
| 9/16" | 0.01" to 0.025" | 1" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 5/8" | 0.01" to 0.025" | 1" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 5/8" | 0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 3/4" | 0.01" to 0.025" | 1 1/4" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 3/4" | 0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 7/8" | 0.01" to 0.025" | 1 3/8" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1" | 0.01" to 0.025" | 1 1/2" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1" | 0.01" to 0.025" | 2" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1 1/8" | 0.01" to 0.025" | 1 3/4" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1 1/4" | 0.01" to 0.025" | 1 7/8" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 25 | 000000000 | 0000 |
| 1 3/8" | 0.01" to 0.025" | 2 1/8" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 10 | 000000000 | 0000 |
| 1 1/2" | 0.01" to 0.025" | 2 1/4" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 10 | 000000000 | 0000 |
| 2" | 0.01" to 0.025" | 3" | -0.01" to 0.01" | Zinc-Plated 1008-1010 Carbon Steel | Rockwell B38 | Magnetic | 5 | 000000000 | 0000 |
Shims for Keyed Shafts
Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.
Shims with a notch need the key inserted. They’re often referred to as arbor spacers.
Stainless steel shims are more corrosion resistant than carbon steel shims. Use them in wet environments where rust is a concern.
For technical drawings and 3-D models, click on a part number.
Notch | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | ID | ID Tolerance | OD | OD Tolerance | Wd. | Dp. | Minimum Hardness | Magnetic Properties | Pkg. Qty. | Pkg. | |
0.048" Thick. (-0.0035" to 0.0035" Tolerance) | |||||||||||
| 1" | 1" | 0" to 0.011" | 1 1/2" | -0.002" to 0.002" | 1/4" | 3/32" | Rockwell B80 | May Be Mildly Magnetic | 5 | 000000000 | 000000 |
| 1 1/4" | 1 1/4" | 0" to 0.011" | 1 3/4" | -0.002" to 0.002" | 5/16" | 1/8" | Rockwell B80 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 1 1/2" | 1 1/2" | 0" to 0.011" | 2 1/8" | -0.002" to 0.002" | 3/8" | 5/32" | Rockwell B80 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
| 2" | 2" | 0" to 0.011" | 2 3/4" | -0.002" to 0.002" | 1/2" | 3/16" | Rockwell B80 | May Be Mildly Magnetic | 5 | 000000000 | 00000 |
Peel-Away Layered Shim Stock
Cut this shim stock it into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
18-8 stainless steel shim stock is more corrosion resistant than carbon steel shim stock.
Carbon steel shim stock has excellent strength and can be welded, but isn't as corrosion resistant as other shim stock.
Aluminum shim stock is lightweight and nonmagnetic. It has good corrosion resistance.
Brass shim stock is corrosion resistant and nonmagnetic.
Polyimide plastic shim stock is corrosion resistant, electrically insulating, and holds its shape at extreme temperatures. It's easier to peel apart than metal shim stock. Stock includes a material certificate with traceable lot number and test report.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | No. of Layers | Min. Hardness | Temper Rating | Specifications Met | Magnetic Properties | Each | |
12" × 12" | ||||||||
|---|---|---|---|---|---|---|---|---|
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 22 | Not Rated | Softened (Annealed) | SAE AMS-DTL-22499 | May Be Mildly Magnetic | 0000000 | 0000000 |
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 15 | Not Rated | Softened (Annealed) | SAE AMS-DTL-22499 | May Be Mildly Magnetic | 0000000 | 000000 |
20" × 24" | ||||||||
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 22 | Not Rated | Softened (Annealed) | SAE AMS-DTL-22499 | May Be Mildly Magnetic | 0000000 | 000000 |
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 15 | Not Rated | Softened (Annealed) | SAE AMS-DTL-22499 | May Be Mildly Magnetic | 0000000 | 000000 |
| Thick. | Thick. Tolerance | No. of Layers | Min. Hardness | Temper Rating | Specifications Met | Magnetic Properties | Each | |
12" × 12" | ||||||||
|---|---|---|---|---|---|---|---|---|
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 22 | Rockwell B60 | Softened (Annealed) | Fed. Spec. QQ-S-698, SAE AMS-DTL-22499 | Magnetic | 0000000 | 000000 |
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 15 | Rockwell B60 | Softened (Annealed) | Fed. Spec. QQ-S-698, SAE AMS-DTL-22499 | Magnetic | 0000000 | 00000 |
20" × 24" | ||||||||
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 22 | Rockwell B60 | Softened (Annealed) | Fed. Spec. QQ-S-698, SAE AMS-DTL-22499 | Magnetic | 0000000 | 000000 |
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 15 | Rockwell B60 | Softened (Annealed) | Fed. Spec. QQ-S-698, SAE AMS-DTL-22499 | Magnetic | 0000000 | 000000 |
12" × 12" | ||||||||
|---|---|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | No. of Layers | Min. Hardness | Temper Rating | Specifications Met | Magnetic Properties | Each | |
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 24 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 000000 |
0.003" Layer Thick. (-0.0003" to 0.0003" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 16 | Not Rated | Full Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 00000 |
| Thick. | Thick. Tolerance | No. of Layers | Min. Hardness | Temper Rating | Specifications Met | Magnetic Properties | Each | |
8" × 24" | ||||||||
|---|---|---|---|---|---|---|---|---|
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 22 | Not Rated | 1/2 Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 0000000 |
12" × 12" | ||||||||
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||||
| 0.048" | -0.002" to 0.005" | 22 | Not Rated | 1/2 Hard | SAE AMS-DTL-22499 | Nonmagnetic | 0000000 | 000000 |
12" × 12" | ||||||
|---|---|---|---|---|---|---|
| Thick. | Thick. Tolerance | No. of Layers | Temperature Range, °F | Specifications Met | Each | |
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance) | ||||||
| 0.048" | -0.002" to 0.005" | 23 | 0° to 250° | ASTM D5213, SAE AMS-DTL-22499 | 0000000 | 0000000 |
Made-to-Order Peel-Away Layered Shims
For unique shim shapes or sizes, send a dimensioned STEP or DXF file to chi.sales@mcmaster.com and we’ll precision cut your shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive. Shims include a material certificate with traceable lot number and test report.
Please leave at least 1/8" wall between shim edge and holes. Minimum hole size is 1/8". Shims should be no smaller than 1" × 1" square or 1" OD. Maximum shim dimension is the largest overall length, width, or diameter of your custom shim.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like brass or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment.
18-8 stainless steel shims are more corrosion resistant than carbon steel shims.
Carbon steel shims have excellent strength and can be welded, but aren't as corrosion resistant as other shims.
Aluminum shims are lightweight and nonmagnetic. They have good corrosion resistance.
Brass shims are corrosion resistant and nonmagnetic.
For technical drawings and 3-D models, click on a part number.
| Thick. | Thick. Tolerance | Min. Hole Size | Min. Wall Thick. | Cutout Tolerance | No. of Layers | Layer Thick. | Min. Hardness | Max. Hardness | Specifications Met | Pkg. of 16 | |
2" × 2" Max. Shim Size | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
18-8 Stainless Steel—ASTM A240 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | ASTM A240 | 000000000 | 0000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | Fed. Spec. QQ-S-698 | 000000000 | 000000 |
1100 Aluminum—ASTM B209, SAE AMS-DTL-22499 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B209, SAE AMS-DTL-22499 | 000000000 | 00000 |
260 Brass—ASTM B36 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B36 | 000000000 | 000000 |
| Pkg. of 4 | |||||||||||
5" × 5" Max. Shim Size | |||||||||||
18-8 Stainless Steel—ASTM A240 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | ASTM A240 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | Fed. Spec. QQ-S-698 | 000000000 | 000000 |
1100 Aluminum—ASTM B209, SAE AMS-DTL-22499 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B209, SAE AMS-DTL-22499 | 000000000 | 00000 |
260 Brass—ASTM B36 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B36 | 000000000 | 000000 |
| Pkg. of 9 | |||||||||||
7" × 7" Max. Shim Size | |||||||||||
18-8 Stainless Steel—ASTM A240 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | ASTM A240 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | Fed. Spec. QQ-S-698 | 000000000 | 000000 |
1100 Aluminum—ASTM B209, SAE AMS-DTL-22499 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B209, SAE AMS-DTL-22499 | 000000000 | 000000 |
260 Brass—ASTM B36 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B36 | 000000000 | 000000 |
| Pkg. of 4 | |||||||||||
11" x 11" Max. Shim Size | |||||||||||
18-8 Stainless Steel—ASTM A240 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | ASTM A240 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | Fed. Spec. QQ-S-698 | 000000000 | 000000 |
1100 Aluminum—ASTM B209, SAE AMS-DTL-22499 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B209, SAE AMS-DTL-22499 | 000000000 | 000000 |
260 Brass—ASTM B36 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B36 | 000000000 | 000000 |
| Pkg. of 1 | |||||||||||
23" x 23" Max. Shim Size | |||||||||||
18-8 Stainless Steel—ASTM A240 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B80 | Rockwell B92 | ASTM A240 | 000000000 | 000000 |
1008-1010 Carbon Steel—Fed. Spec. QQ-S-698 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Rockwell B54 | Rockwell B65 | Fed. Spec. QQ-S-698 | 000000000 | 000000 |
1100 Aluminum—ASTM B209, SAE AMS-DTL-22499 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B209, SAE AMS-DTL-22499 | 000000000 | 000000 |
260 Brass—ASTM B36 | |||||||||||
| 0.048" | -0.0024" to 0.0024" | 1/8" | 1/8" | -0.02" to 0.02" | 24 | 0.002" | Not Rated | __ | ASTM B36 | 000000000 | 000000 |
Angled-Edge Washers for Toggle Clamp Holding Screws
Use on clamps with open arms to keep the holding screw in place.
302 stainless steel washers provide better corrosion resistance than steel washers.
For technical drawings and 3-D models, click on a part number.