Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. These shirts meet ANSI/ISEA 107 Class 2 standards for high-visibility clothing when working on or near roadways. Made of polyester fabric, these shirts are lightweight and moisture wicking to keep you cool.

Wear these fitted garments under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 or 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. All base layer materials are lightweight, breathable, and moisture wicking for added comfort.

Cotton/acrylic and modacrylic/rayon/spandex base layers are stretchy for increased mobility and range of motion.

Modacrylic base layers dry quickly.

These shirts meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Made of acrylic/Buna-N blend, these shirts are breathable and moisture wicking to keep you cool. They have buttons down the front and on the cuffs, as well as two chest pockets.

When measuring chest size, measure around the fullest part of your chest.

These coats meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These coats are made of breathable cotton and are self-extinguishing. They have a flap in the front that conceals the snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

These vests meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1 and ANSI/ISEA 107 standards for high visibility. They are rated ANSI Class 2 for working on or near roadways. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These vests are mesh acrylic and are self-extinguishing. They are stitched with Nomex thread for added durability. They have hook and loop closures down the front and one waist pocket.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these vests.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. Black fabric on the lower half keeps jackets looking cleaner longer than all-yellow jackets. These jackets meet Class 3 ANSI/ISEA 107 standards for workers that need to be seen by traffic at a minimum distance of 1/4 of a mile. They have a zipper down the front.

Polyester provides the comfort of a moisture-wicking sweatshirt with the warmth of a jacket.

These sweatshirts meet NFPA 70E for protection against electrical arc flashes and NFPA 2112 for flame resistance. The front zipper is fully covered for complete protection from fire. Sweatshirts are made of a blended fleece for comfort and warmth. Knit cuffs and a knit waistband fit snugly to prevent heat from escaping.

These jackets meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jackets are made of a durable modacrylic/aramid blend. They have a flap in the front that conceals the zipper.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Wear these fitted shirts under clothing for an added layer of insulation. Made of moisture-wicking polypropylene, these shirts trap heat while allowing perspiration to evaporate. Knit cuffs help conserve heat and keep sleeves in place.

When measuring chest size, measure around the fullest part of your chest.

These jackets protect you from the cold and wind while offering greater mobility than heavyweight coats. They have a zipper down the front.

Cotton/polyester jackets provide the comfort of a sweatshirt with the warmth of a jacket. Men’s cotton/polyester jackets have a knit waist and cuffs to trap heat and keep the jacket in place. They have two waist pockets. Women’s cotton/polyester jackets have a water-repellent finish to keep you dry. Adjustable hook and loop cuffs tighten to fit your wrists and expand to fit over gloves. These jackets come with a snap-on hood—tighten the draw cord for a snug fit to keep out wind. They have two waist pockets, a chest pocket, and an internal chest pocket.

Made of a durable cotton/polyester blend, these jackets protect against dirt, wear, and abrasion in workshops and labs. They cover the top of your hips, have open cuffs, and buttons down the front. A wrinkle-resistant finish provides a professional look.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the jacket.

Protect sensitive equipment from damage and malfunction—these jackets quickly divert static electricity. Surface resistivity of unlaundered fabric is 10⁶ ohms. These jackets are made of a durable cotton/polyester blend to protect against wear and abrasion in workshops and labs. They have snaps down the front and adjustable snaps on the cuffs. Cuff snaps may also be attached to a grounding point. Jackets cover your hips and have one chest pocket and two waist pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the jacket.

Smocks wrap around the front and tie on the side. They are made of a durable cotton/polyester blend to protect against dirt, wear, and abrasion in workshops and labs. They are knee length and have open cuffs, one chest pocket, and two waist pockets. Hip slits provide access to pants pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over clothing you expect to wear under the smock.

Just like the scrubs worn in hospitals, these shirts are soft and comfortable for all-day wear. They’re made of 55% cotton and 45% polyester. They are reversible with one chest pocket on each side.

When measuring chest size, measure around the fullest part of your chest.

Protect your arms and torso when welding.

Cotton is treated to protect against low radiant heat and minor sparks. Jackets with a 12 oz. material weight provide better durability and protection. They have one inside pocket.

Cotton/nylon blend (women's) is soft, lightweight, and protects against low radiant heat and sparks. These jackets have a more contoured and less rigid fit than men’s jackets. For extra protection, they have a hook and loop neck closure. Two waist pockets give you spots to store items.

Cotton and leather protects against low radiant heat with added cut protection and heat resistance on the sleeves. These jackets have a pocket on each sleeve, as well as an inside pocket.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. Brown leather jackets are designed with small vents under the arms and along the upper back to increase air circulation and cool you off. They have a pocket on each sleeve, as well as an inside pocket. Gray leather jackets have a higher material weight than brown leather jackets to provide better durability and protection.

Acrylic/Buna-N blend protects against radiant heat, flames, and welding sparks while providing superior breathability to leather. These jackets have two chest pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Bright colors and reflective stripes make it easy to spot workers in low-visibility areas. Made of a rayon/aramid blend, these jackets protect against radiant heat, flames, and welding sparks. They are breathable to keep you cool. They snap closed and have one inside pocket and one pocket on the left sleeve.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Snap these bibs onto cape sleeves (sold separately) to protect your stomach when welding.

Cotton is treated to protect against low radiant heat and minor sparks. These bibs have a tie in the back.

Leather protects against radiant heat, flames, and welding. It’s flexible and resists cuts and abrasion better than cotton. These bibs have an adjustable buckle in the back.

Stay cool in hot conditions with these lightweight, breathable shirts. Soak them in water for a few minutes and wring them out before putting them on. Wear these shirts on their own or underneath other clothing.

Short sleeve shirts are lined with waterproof nylon to keep you dry, even when the shirt is soaked. Water evaporates from the nylon/spandex fabric blend, cooling you off for five to ten hours.

Made from polyester fabric, sleeveless shirts hold moisture against your skin. When they’re wet, they lower your body temperature, keeping you cool for up to two hours.