Shock Isolators | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Mount Type Mount Type

	Thread Size Thread Size

17,669 Products

Vibration-Damping Mounts with Unthreaded Hole

Horizontal-Force Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

Isolate vibration and noise from oscillating equipment like fans and tumblers that create horizontal (shear) force.

General Purpose Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

Bolt-Down Vibration-Damping Mounts
with Unthreaded Hole for Tight Spaces

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

Fail-Safe Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Light Duty Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Easy-to-Install Vibration-Damping
Mounts with Unthreaded Hole

A two-piece design makes these mounts easier to install than one-piece mounts.

General Purpose Vibration-Damping
Mounts with Unthreaded Hole

Oil-Resistant Vibration-Damping
Mounts with Unthreaded Hole

Made of neoprene rubber, these mounts are oil resistant, so they're good for use under generators, HVAC equipment, electric motors, pumps, and blowers.

Extreme-Temperature Vibration-Damping
Mounts with Unthreaded Hole

Made of tightly layered stainless steel mesh, these mounts withstand temperatures up to 500° F.

Extreme-Temperature Vibration-Damping
Mounts with Counterbored Unthreaded Hole

Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.

Easy-to-Install Extreme-Temperature
Vibration-Damping Mounts with Unthreaded Hole

A two-piece design makes these mounts easier to install than one-piece mounts.

Chemical-Resistant Vibration-Damping
Mounts with Unthreaded Hole

These mounts withstand exposure to weather and resist oil, antifreeze, and other petroleum-based fluids.

Vibration-Damping Mounts with Threaded Hole

General Purpose Bolt-Down
Vibration-Damping Mounts with Threaded Hole

Fail-Safe Bolt-Down Vibration-Damping
Mounts with Threaded Hole

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Extreme-Force Bolt-Down Vibration-Damping
Mounts with Threaded Hole

Spring action provides significant isolation of vibration and noise.

Adjustable Extreme-Force Bolt-Down
Vibration-Damping Mounts with Threaded Hole

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.

Seismic Bolt-Down Vibration-Damping
Mounts with Threaded Hole

Limit damage during moderate earthquakes.

Chemical-Resistant Vibration-Damping
Mounts with Threaded Hole and Steel Plate

The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.

Chemical-Resistant Vibration-Damping Mounts
with Threaded Hole and Corrosion-Resistant Plate

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Oil-Resistant Vibration-Damping
Mounts with Threaded Hole

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

General Purpose Vibration-Damping Sandwich Mounts

General Purpose Vibration-Damping
Sandwich Mounts with Stud and Insert

Metric General Purpose Vibration-Damping
Sandwich Mounts with Stud and Insert

General Purpose Vibration-Damping
Sandwich Mounts with Studs

Metric General Purpose Vibration-Damping
Sandwich Mounts with Studs

General Purpose Vibration-Damping
Sandwich Mounts with Inserts

Metric General Purpose Vibration-Damping
Sandwich Mounts with Inserts

Corrosion-Resistant Vibration-Damping Sandwich Mounts

Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Metric Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Inserts

Metric Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Inserts

Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Studs

Metric Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Studs

Extreme-Temperature Vibration-Damping Sandwich Mounts

Extreme-Temperature Vibration-Damping
Sandwich Mounts with Stud and Insert

Metric Extreme-Temperature Vibration-Damping
Sandwich Mounts with Stud and Insert

Extreme-Temperature Vibration-Damping
Sandwich Mounts with Studs

Metric Extreme-Temperature
Vibration-Damping Sandwich Mounts with Studs

Chemical-Resistant Vibration-Damping Sandwich Mounts

Chemical-Resistant Vibration-Damping
Sandwich Mounts with Studs

Metric Chemical-Resistant Vibration-Damping
Sandwich Mounts with Studs

Metric Chemical-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Chemical-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Vibration-Damping Grommets, Bushings, and Washers

Ribbed Vibration-Damping Grommets

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.

Extreme-Temperature Ribbed
Vibration-Damping Grommets

In addition to having a wider temperature range than our other ribbed vibration-damping grommets, these have excellent weather resistance.

Vibration-Damping Grommets

Press these grommets into a hole to add cushion on both sides.

Extreme-Temperature Vibration-Damping Grommets

In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.

Ribbed Vibration-Damping Bushings

Ribbed bushings are more flexible than our smooth vibration-damping bushings, so they're easier to install.

Extreme-Temperature Ribbed
Vibration-Damping Bushings

In addition to having a wider temperature range than our other ribbed vibration-damping bushings, these have excellent weather resistance.

Extreme-Temperature Vibration-Damping Bushings

In addition to having a wider temperature range than our other vibration-damping bushings, these have excellent weather resistance.

Vibration-Damping Bushings

Easier to install than grommets, push these bushings through your mounting hole to dampen vibration. Use them with a vibration-damping washer to isolate vibration.

Vibration-Damping Washers

Use these in place of normal washers to damp vibration and cushion your joint.

Extreme-Temperature Vibration-Damping Washers

In addition to having a wider temperature range than our other vibration-damping washers, these have excellent weather resistance.

Vibration-Damping Pads

Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.

Vibration-Damping Pads for Precision Equipment

These soft pads work well for isolating vibration with light loads such as lab and testing equipment.

Oil-Resistant Vibration-Damping Pad Packs

Vibration-Damping Pad Packs for Heavy Machinery

Vibration-Damping Pads for Heavy Machinery

Able to shoulder up to 1,500 psi per mounting point, nitrile pads can support heavy machinery.

Oil-Resistant Vibration-Damping Pads

Made of nitrile rubber, these pads have excellent resistance to oil and solvents.

UV-Resistant Vibration-Damping Pads

Great for use outdoors, these durable pads are neoprene rubber, which withstands exposure to direct sunlight.

UV-Resistant Vibration-Damping Pad Packs

Chemical-Resistant Vibration-Damping Pad Packs

Fabric-Reinforced Vibration-Damping
Pads for Heavy Machinery

Reinforced with fabric so extreme compression won’t deform them, these pads protect surfaces from impact, dampen vibration and noise, and act as stable connection points. They’re commonly known as bearing pads.

Chemical-Resistant Vibration-Damping Pads

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

Fabric-Reinforced Vibration-Damping
Pad Packs for Heavy Machinery

Shield surfaces from impact, reduce vibration and noise, and stabilize connection points with these packs of pads—they’re reinforced with fabric to endure extreme compression without deforming. They’re also known as bearing pads.

Extreme-Temperature Vibration-Damping Pads

Made of tightly layered stainless steel mesh, these pads withstand a wide temperature range from -120° to 500° F.

Vibration-Damping Leveling Mounts

Extreme-Force Vibration-Damping
Leveling Mounts with Threaded Stud

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

Quick-Install Vibration-Damping
Leveling Mounts with Threaded Stud

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

Vibration-Damping Leveling Mounts with Threaded Stud

Vibration-Damping Leveling Mounts with Threaded Hole

Heavy Duty Vibration-Damping Leveling Mounts

Choose from mounts that support 3,000 to 30,000 lbs. for heavy machinery.

Corrosion-Resistant Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Swivel Vibration-Damping Leveling
Mounts with Threaded Hole

Sanitary Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

Extreme-Force Swivel Vibration-Damping
Leveling Mounts with Threaded Hole

Higher deflection ratings translate to greater vibration and shock isolation.

Swivel Vibration-Damping Leveling
Mounts with Threaded Stud

Bolt-Down Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Bolt these mounts down to keep your equipment stationary.

Extreme-Force Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Higher deflection ratings translate to greater vibration and shock isolation.

Low-Clearance Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Leveling Mounts

Light Duty Leveling Mounts with Threaded Stud

Meant for light duty applications, these mounts are not rated for capacity.

Sanitary Heavy Duty Swivel Leveling Mounts

Designed for use in sanitary and food processing areas, these mounts level tanks and machinery on uneven floors and create space to clean underneath.

Seismic Swivel Leveling Mounts

Adjust the swivels on these mounts to level equipment on uneven surfaces for protection during earthquakes.

Feet

Slip-On Feet

Cover the bottom of furniture legs.

Adhesive-Back Feet

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Screw-On Feet

Screw these feet to the bottom of wood furniture legs.

Hammer-On Feet

Use these feet on furniture with wood legs.

Rest-On Feet

Place these feet under furniture and equipment.

Oil-Resistant Slip-On Feet

Made of neoprene rubber, these feet are a good choice for use in oily environments.

Swivel Hammer-On Feet

A swiveling base compensates for angled legs and uneven surfaces.

Low-Friction Adhesive-Back Feet

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Cushioned Hammer-On Feet

An integral cushion reduces noise and vibration.

Angled Press-Fit Feet

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Thread-On Feet

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

Press-Fit Feet

Press these feet into tubular legs of tables, chairs, and other furniture.

UV-Resistant Slip-On Feet

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

Chemical-Resistant Low-Friction Adhesive-Back Feet

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

Swiveling Press-Fit Feet

A swiveling base compensates for angled legs and uneven surfaces.

Compression Springs

Fastener-Mount Compression Springs

Differently sized mounting holes on either side allow for mounting flexibility.

High-Load Fastener-Mount Compression Springs

These springs handle higher loads than standard fastener-mount compression springs. Secure by inserting a fastener through the hole at the base.

Ultra-High-Load Fastener-Mount Compression Springs

For the heaviest loads, these springs have more than double the load capacity of High-Load Fastener-Mount Compression Springs. Secure by inserting a fastener through the hole at the base.

Flanged Compression Springs

Flanges on the ends of these springs provide a flat mounting surface.

Compression Springs

Use these springs in noncorrosive environments.

Confined-Space Conical Compression Springs

Install these springs in tight spots. When pushed together, the coils nest within each other.

Plastic Compression Springs

A lightweight, nonmagnetic, and nonconductive alternative to metal springs, these plastic springs are better for corrosive environments and applications where metal springs cannot be used, such as in sensitive imaging equipment and machines where stray electrical current may cause damage.

Corrosion-Resistant Precision Compression Springs

Made of stainless steel, these springs are more corrosion resistant than steel compression springs.

Mil. Spec. Compression Springs

These springs meet MS24585 and come with a traceable lot number and material test report.

Compression Spring Stock

Use these steel springs in noncorrosive environments.

Made-to-Order Compression Springs

If you're designing something unique or can't find the exact size spring you need, we'll get it for you.

Precision Compression Springs

Use these steel springs in noncorrosive environments.

Corrosion-Resistant Compression Springs

These springs are more corrosion resistant than standard compression springs.

Corrosion-Resistant Compression Spring Stock

Made of stainless steel, these springs are more corrosion resistant than steel compression springs.

Die Springs

Corrosion-Resistant Die Springs

A quieter, more vibration-resistant alternative to traditional steel die springs, these polyurethane springs resist oxidation, oil, and abrasion in high-load, high-pressure applications.

Die Springs

Use these spring-tempered steel die springs for low-cycle applications such as trimming and stamping.

Die Spring Stock

Keep these 36" springs on hand so you can cut the right length whenever you need it.

Color-Coded Die Springs

These springs follow the Raymond die spring color code.

Metric Color-Coded Die Springs

Colors and sizes follow ISO 10243 for metric die springs.

Linear Wave Springs

Similar to disc springs, these linear springs are good for absorbing vibration and filling in gaps along the length of an object.

Disc Springs

Curved Disc Springs

Use these high-carbon steel springs in noncorrosive environments.

Stacked Wave Disc Springs

Multiple rows of waves allow these springs to handle higher loads than standard wave disc springs.

Wave Disc Springs

Use these high-carbon steel springs in noncorrosive environments.

Notched Disc Springs

Notches make these springs more flexible than Belleville disc springs and allow liquid to flow around the spring, even while it's in use.

Flat Disc Springs

These flat rubber springs handle heavy loads, similar to Belleville disc springs, and resist oxidation, oil, and abrasion.

Corrosion-Resistant Stacked Wave Disc Springs

Made of 17-7 PH stainless steel with multiple rows of waves, these springs are more corrosion resistant than steel springs and handle greater loads than standard wave disc springs.

Extreme-Temperature Belleville Disc Springs

These springs withstand temperatures from -400° to 1100° F. All are 718 nickel, a high-strength, corrosion-resistant alloy that's also known as Inconel.

Corrosion-Resistant Curved Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs.

Belleville Disc Springs for Ball Bearings

Install these springs, also known as bearing preload washers, against ball bearings to reduce noise and unwanted movement along the shaft.

Corrosion-Resistant Wave Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel wave disc springs.

Corrosion-Resistant Belleville Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs. Use them on shafts, bolts, and the ends of valves to maintain tension and separate components.

Finger Disc Springs

Raised tabs, known as fingers, enable these springs to compress without widening, so they won't bind or deform in housings with little clearance. Use with ball bearings in precision and high-speed drive assemblies to reduce noise, vibration, and wear.

Split Wave Disc Springs

A gap allows these springs to compress without widening, so they won't bind or deform when used inside a housing with tight clearance.

Belleville Disc Springs for Flange Bolts

Keep pipe flange connections sealed during demanding applications. When installed under flange bolt heads, these springs compensate for shock loads, vibration, and thermal expansion and contraction.

Mil. Spec. Belleville Disc Springs

These springs meet MIL-W-12133.

Belleville Disc Springs

Use these steel springs in noncorrosive environments.

Shock Absorbers

Light Duty Adjustable Shock Absorbers

Also known as snubbers, use these shock absorbers in low-load, high-cycle applications.

Adjustable Shock Absorbers

Turn the knob on these shock absorbers to change deceleration to suit varying loads and speeds.

Leak-Resistant Adjustable Shock Absorbers

An airtight seal prevents leaks and protects moving parts from dust to minimize wear for a long service life.

Long-Length Shock Absorbers

Like the shocks in a car, these mount between two surfaces to minimize vibration and motion transfer caused by sudden impact.

Corrosion-Resistant Self-Adjusting Shock Absorbers

Made from stainless steel for excellent corrosion resistance in damp environments.

Self-Adjusting Shock Absorbers

Accommodate changing loads and energy without manual adjustment.

Adjustable Air Springs

Isolate vibration and absorb shock from moving equipment, even with changing loads. Also for leveling and lifting, use compressed air to adjust air springs to the height and force required for your application.

Bumpers

Load-Rated Threaded Bumpers

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

Unthreaded Bumpers

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Threaded Bumpers

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

Load-Rated Unthreaded Bumpers

Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.

High-Temperature Load-Rated Threaded Bumpers

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Heavy Duty Unthreaded Bumpers

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

Nonslip Unthreaded Bumpers

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Angle Bumpers

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

Load-Rated Threaded-Stud Bumpers

Heavy Duty Threaded-Stud Bumpers

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Threaded-Stud Bumpers

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

High-Temperature Load-Rated Threaded-Stud Bumpers

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Load-Rated Adhesive-Back Bumpers

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Tack Bumpers

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Bumper Assortments

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Compressible-Stem Push-In Bumpers

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Push-In Bumpers

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Adhesive-Back Bumpers

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Magnetic Bumpers

A magnetic base makes it easy to attach, move, and replace these bumpers on metal surfaces. Use them for guarding, aligning, and positioning parts.

Cut-to-Size Adhesive-Back Bumpers

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Tight-Grip Push-In Bumpers

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Bumpers for Tubing and Rods

With a split design, you can easily place these bumpers on tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. Use the concealed screw to secure them in place.

Wraparound Bumpers for Tubing and Rods

For quick and easy installation, wrap these bumpers around tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. They're also good for providing protection during shipment and storage.

Crane Bumpers

Designed to withstand repeated heavy hits on bridge or ceiling cranes, these bumpers protect walls or beams as well as extend crane life.

Facility Door Bumpers and Stops

Push-In Door Silencers

Press these silencers into a drilled hole in the door frame. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Wall-Mount Door Stops

Designed to mount at the point of contact between a door handle and the wall, these stops prevent handles from damaging walls when doors swing open.

Floor-Mount Door Stops

Install these stops in wood or concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Heavy Duty Floor-Mount Door Stops

Designed to withstand impact in high-traffic areas, these stops have an anchor that mounts in a hole and sets with grout. Install them in concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Baseboard-Mount Door Stops

Simply screw these bumpers into baseboards with the attached self-tapping wood screw to prevent doors from damaging walls.

Shock-Absorbing Door Bumpers

Protect large swinging doors where carts and vehicles are used to push the door open. These polyethylene plastic bumpers are commonly used on two-way swinging doors.

Door Stops for Sliding Doors

Keep sliding doors and panels from damaging walls and door frames.

Half-Dome Floor-Mount Door Stops

The half-dome shape won't catch mops and scrubbers. Install these stops in wood or concrete floors.

Lockset Bumpers

Protect door knobs and other hardware from damage caused by carts, dollies, and other equipment.

Heavy Duty Wall-Mount Door Stops

These stops have a metal stem and base for strength and durability. Use them to protect walls from doors in high-traffic applications.

Hinge-Pin-Mount Door Stops

Remove the pin on your door's hinge, slide it through one of these stops, and then insert it back into the hinge to set and adjust the door's opening angle.

Adhesive-Back Door Silencers

Simply adhere these silencers to the door frame—no need for an installation hole. Doors close firmly yet quietly with these silencers. They also eliminate the rattling of doors against their frames.

Surface Guards and Trim

Slippery High-Temperature Plastic Trim

This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. With a slippery surface, it minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

Food Industry Rubber Trim

Guard the edges of panels, signs, glass, and other surfaces in food plants from frequent bumps and scrapes. This trim is FDA compliant, so it’s safe to directly touch food.

High-Visibility Surface Guards

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect walls and other flat surfaces from impact.

Multi-Layer Surface Protection Film

Press this optically clear film into place on windows, mirrors, and glass surfaces. When one layer gets scratched or marred, peel it away to expose a new layer.

Conductive Plastic Trim

With a surface resistivity of 10 ⁵ ohms this trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of plastic, it's also chemical resistant. Use it to protect the edges of of electronics equipment and circuit boards from impact.

Food Industry Wear Plates

Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life.

Heavy Duty Plastic Trim Selector Packs

Sample multiple sizes and styles of heavy duty plastic trim.

Reinforcing Door Edge Plates

Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

Panel Connecting Trim

Connect two panels while protecting the edges from damage.

Pipe and Tubing Guards

Safeguard pipe, tubing, and other round equipment from damage. Black and yellow stripes create a visual alert to draw attention to equipment and obstructions.

Heavy Duty Plastic Trim

This trim has a metal core for added strength and stability. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

Cushioned Flexible Metal Trim

Cushioning on the top provides added protection from impact. This nylon-coated stainless steel trim combines strength with flexibility for a snug hold. It can also protect wire, cable, and hose.

Flame-Retardant Plastic Trim

This trim meets FMVSS-302 for Federal Motor Vehicle Safety Standards for flammability, UL 94 HB flame requirements, and NFPA 1971 (National Fire Protection Agency) standards. Made of plastic, it's also chemical resistant. Use it to protect the edges of panels, boards, and signs from impact.

High-Visibility Corner Guards

Vibrant colors create a visual alert to draw attention to equipment and obstructions. These guards protect corners on walls, posts, shelving, and other surfaces from damage.

Rubber Trim

Made of rubber, this trim resists abrasion better than plastic trim. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

High-Visibility Foam Trim

Black and yellow stripes create a visual alert to draw attention to equipment and obstructions. Designed to cushion during impact, this foam trim protects edges on posts, shelving, and other surfaces from damage.

Door Edge Plates

Reinforce the edge of a door to guard it against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

Metal Wall Bases

These aluminum bases provide more impact protection than plastic bases. In addition to protecting the bottom of a wall from damage, they create a finished look where the wall meets the floor. They're commonly used in warehouse and manufacturing areas.

Plastic Trim

Select this plastic trim for its chemical resistance. Often used on panels, boards, signs, and mirrors, it protects edges from impact.

Heavy Duty High-Temperature Rubber Trim

A metal core adds strength and stability, making this trim more durable than other high-temperature rubber trim. It withstands temperatures up to 400° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

High-Temperature Foam Trim

This trim withstands temperatures up to 450° F—more than twice as high as other foam trim. Designed to cushion during impact, it protects equipment and surfaces from damage.

Food Industry Plastic Trim

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

High-Temperature Flexible Metal Trim

Designed to withstand temperatures up to 800° F, this stainless steel trim is good for use with ovens, boilers, and heat shields. It combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges.

Plastic Wall Bases

In addition to protecting the bottom of a wall from damage, these bases create a finished look where the wall meets the floor. They're commonly used in offices, hospitals, and schools.

Heavy Duty Corner and Surface Guard Systems

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

Plastic Corner Guards

Commonly used in offices, hospitals, and schools, these guards protect corners on walls and other surfaces from impact.

Heavy Duty Rubber Trim

A metal core adds strength and stability, making this trim more durable than standard rubber trim. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of panels, boards, signs, and mirrors from impact.

Metal Corner Guards

These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.

Surface Guards

Protect walls and other surfaces from impact.

Corner and Surface Guard Systems

Combine corner guards, surface guards, and end caps to create a system that protects walls and equipment from impact and wear. Often used in offices, hospitals, and schools, these systems protect against damage from small carts and chairs.

Slippery Plastic Trim

With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant.

Raised-Bulb Corner Guards

With a raised bulb to absorb greater impact than standard corner guards, these guards protect walls, cabinets, and other surfaces.

Rubber Trim Selector Packs

Sample multiple sizes and styles of rubber trim.

Glow-in-the-Dark Corner Guards

Even in the dark, these black and yellow striped guards draw attention to equipment and obstructions. They protect corners on walls, posts, shelving, and other surfaces from damage.

Self-Lubricating Wear Plates

Impact causes these porous bronze plates to release a thin layer of oil on the surface to minimize friction. Often found on conveyor systems and fabricating machinery, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life.

Glow-in-the-Dark Foam Trim

Even in the dark, this black and yellow striped trim draws attention to equipment and obstructions. Designed to cushion during impact, it protects edges on posts, shelving, and other surfaces from damage.

Flexible Metal Trim

This nylon-coated stainless steel trim combines strength with flexibility to hold snugly on flat, round, and irregular-shaped edges. It can also protect wire, cable, and hose.

High-Temperature Rubber Trim

This trim withstands temperatures up to 450° F, which is generally twice as high as our standard rubber trim. Use it to protect the edges of panels, boards, and signs from impact. Made of rubber, it resists abrasion better than plastic trim.

Raised-Bulb Surface Guards

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

Metal Trim

Made of aluminum or stainless steel, this trim withstands heavy impact for maximum surface protection. It's often used on panels, boards, signs, and mirrors to protect the edges.

Door Kick Plates

Also known as door plates, armor plates, and mop plates, kick plates protect the base of a door from damage caused by foot traffic and equipment.

Magnetic Wear Strips

Easily attach, move, and replace these magnetic wear strips on metal surfaces to minimize friction—simply press them on and peel them off as needed. Often found on conveyor systems and chutes, use these strips where friction between two parts or materials is wearing down equipment to extend equipment life.

Surface Protection Film

Use this film on metal and plastic parts, appliances, and electronic equipment for protection against damage during packaging, shipping, and installation.

Conductive Rubber Trim

This trim safeguards equipment from static electricity by diverting electrostatic charges quickly. Made of rubber, it resists abrasion better than plastic trim. Use it to protect the edges of electronics equipment and circuit boards from impact.

Vibration Dampers

Vibration Damping Coatings

Apply these coatings to irregular shapes and large areas and reduce noise caused by vibration. Keep applying coats until desired noise reduction is achieved.

Vibration Damping Sheets

Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.

Super-Cushioning Foam

Extra-Tough Super-Cushioning
Polyethylene Foam Sheets and Strips

These sheets and strips are made of cross-linked polyethylene, so they are stronger and more chemical resistant than other types of polyethylene foam.

Super-Cushioning Polyethylene
Foam Sheets and Strips

Also known as Ethafoam.

Food Industry Super-Cushioning
Polyethylene Foam Sheets

Made of FDA-listed materials, these polyethylene foam sheets are often used as packaging for food products to absorb shock and damp vibration.

Laminated Super-Cushioning
Polyurethane/Polyethylene Foam Sheets and Strips

These dual-material foam sheets and strips have ultra-soft polyurethane foam on one side and chemical-resistant polyethylene foam on the other. They are widely used in packaging applications to absorb shock and damp vibration.

Shock-Absorbing Resilient
Polyurethane Foam Sheets and Strips

Often used for impact pads, gaskets, and enclosure seals, these polyurethane foam sheets and strips absorb shock better than other resilient foam.

Flame-Retardant Super-Cushioning
Polyurethane Foam Sheets and Strips

When these sheets and strips are exposed to flames, the surface chars to create a protective barrier that prevents melting, dripping, and the possibility of spreading fire.

Super-Cushioning Polyurethane Foam
Sheets, Bars, Cubes, and Strips

Durable enough to be used in seat cushions, this flexible polyurethane foam provides gentle cushioning support.

Water-Resistant Resilient
Polyurethane Foam Sheets and Strips

Good for tough vacuum-sealing and low closure-force applications, these polyurethane foam sheets and strips have open/closed cells to keep water, air, and gases from being absorbed when they are compressed at least 25%. Even after extended compression, all bounce back to shape faster than other foams we offer.

Ultra-Conformable Polyurethane
Foam Sheets and Strips

Commonly called memory foam and Confor, these sheets and strips have the best cushioning qualities of all the foam we offer.

Resilient Polyurethane Foam Sheets and Strips

Even after extended compression, these high-performance polyurethane foam sheets and strips bounce back to shape faster than any other foam we offer. Also known as Poron urethane, they also stand up to wear caused by rubbing and scraping.

Tear-Resistant Super-Cushioning EVA Foam Sheets

Often used as padding in helmets, gloves, and boots, this super-strong EVA foam absorbs shock and resists tearing better than other types of foam.

Ultra-Tough Super-Cushioning Ionomer Foam Sheets

Exceptionally strong, this lightweight ionomer foam offers excellent resistance to impact, UV light, and water. It stands up to wear caused by rubbing and scraping and is often used on bumpers and buoys.

Super-Cushioning Foam Egg-Crate Sheets

Super-Cushioning Foam Cubed Sheets

Also called plucking foam, these scored foam sheets allow you to pull out individual cubes for custom-shaped packaging.

Super-Cushioning Foam Mesh Sheets

There are hundreds of cushioning pillows in every foot of these pliable mesh sheets. They're often used as a protective liner in drawers and cabinets and anywhere a nonskid surface is required.

Super-Cushioning Polyurethane
Foam Cords and Circles

Use these flexible polyurethane foam cords and circles to cushion narrow spaces, such as channels and gaps.

Super-Cushioning Foam Half Rounds

Use these foam half rounds as a cushioning bumper.

Super-Cushioning Foam U-Channels

The open top allows these foam U-channels to slide over and cushion an edge.

Multipurpose Foam

Ultra-Conformable Light Duty
Vinyl Foam Sheets and Strips

These vinyl foam sheets and strips are so conformable that once they're compressed they won't fully spring back. Use them to fill gaps and seal uneven surfaces.

Wear-Resistant Natural Gum Foam Sheets and Strips

Because this natural rubber foam readily bounces back to shape after compression, it’s a good choice for repetitive sealing applications, such as on doors.

Fabric-Faced Wear-Resistant
Natural Gum Foam Sheets

The original mouse pad material. These natural foam rubber sheets have a crisscross-textured skin on one side for a nonslip gripping surface and a layer of polyester fabric on the other side that allows objects to smoothly slide across it.

Fabric-Covered Multipurpose Neoprene Foam Sheets

Just like the material found in wetsuits, these neoprene foam sheets are encased in nylon fabric for additional protection from wear caused by rubbing and abrasion.

Light Duty Blended EPDM Foam Sheets and Strips

EPDM is blended with neoprene and SBR to create a general-purpose foam that offers good resistance to water and wear.

Multipurpose Blended Neoprene
Foam Sheets and Strips

Made of a blend of neoprene and EDPM, these foam sheets and strips resist water, sunlight, and oxidation.

Multipurpose Neoprene Foam Sheets and Strips

In addition to having good resistance to water, sunlight, and oxidation, these neoprene foam sheets and strips resist swelling when they come into contact with oil.

Ultra-Weather-Resistant EPDM Foam Sheets and Strips

Made of EPDM foam, these sheets and strips have the best resistance to water, sunlight, and oxidation of all the foam we offer.

Ultra-Weather-Resistant EPDM Foam Cords

Made of EPDM, this foam has the best resistance to water, sunlight, and oxidation of all the foam we offer.

Ultra-Weather-Resistant EPDM Foam Tubes

These EPDM foam tubes have the best resistance to water, sunlight, and oxidation of all the foam tubes we offer.

Light Duty Weather-Resistant Santoprene Foam Cords

An economical alternative to neoprene foam, these Santoprene foam cords stand up to water, sunlight, and oxidation but lack oil resistance.

Multipurpose Blended Neoprene Foam Tubes

Neoprene is blended with EPDM and polyethylene for foam tubes that offer good resistance to water, sunlight, and oxidation.

Multipurpose Neoprene Foam Cords

These neoprene foam cords stand up to water, sunlight, and oxidation, plus they resist swelling when they come into contact with oil.

Oil-Resistant Foam

Oil-Resistant Blended Buna-N Foam Strips

Made from a blend of Buna-N, neoprene, and vinyl, these foam strips have good resistance to oil.

Oil-Resistant Epichlorohydrin Foam Sheets

Made of Epichlorohydrin, an alternative to Buna-N, these foam sheets have excellent resistance to oil.

Flame-Retardant Oil-Resistant Blended
Buna-N Foam Sheets and Strips

This foam meets UL fire extinguishing specifications. It's made from a blend of Buna-N, neoprene, and vinyl to offer offer good resistance to oil.

Oil-Resistant Buna-N Foam Sheets

Made of Buna-N foam, these sheets offer excellent oil resistance. They also resist fuel and solvents.

High-Temperature Foam

Flame-Retardant Silicone Foam Sheets and Strips

Prevent the spread of flames with these self-extinguishing silicone foam sheets and strips.

Resilient High-Temperature
Silicone Foam Sheets and Strips

These sheets and strips will bounce back to shape, even after extended compression.

Resilient Flame-Retardant
Silicone Foam Sheets and Strips

Even after extended compression, these sheets and strips will bounce back to shape.

High-Temperature Silicone Foam Sheets and Strips

Silicone maintains its flexibility across a wide range of temperatures.

Food Industry High-Temperature Silicone Foam Cords

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

High-Temperature Foam Tubes

Heat-Reflecting Flame-Retardant Silicone Foam Sheets

A thin layer of aluminized fiberglass on this silicone foam reflects heat to protect sensitive equipment.

Super-Resilient High-Temperature
Silicone Foam Sheets and Strips

This premium silicone is the most resilient foam we offer. It is equivalent to Cohrlastic and is also known as Norseal and silicone sponge.

Fabric-Reinforced High-Temperature
Silicone Foam Strips

One layer of fiberglass fabric is sandwiched between layers of silicone foam giving these strips strength to handle high-stress applications, such as gasketing.

Lightweight High-Temperature Polyimide Foam Sheets

In addition to being lighter in weight than silicone foam, this polyimide foam also remains soft and conformable across a broader temperature range.

Weather-Resistant High-Temperature
Silicone Foam Strips

Even after exposure to sunlight, rain, and snow, these silicone foam strips remain flexible.

Resilient High-Temperature
Silicone Foam Sample Packs

High-Temperature Silicone Foam Cords

Seal and cushion narrow spaces in hot environments with these silicone foam cords.

High-Temperature Foam Rings

Seal and damp vibration in high-temperature equipment with these rings.

Food Industry High-Temperature
Silicone Foam Sheets and Strips

Seal and damp vibration around high-temperature food-service equipment with these silicone foam sheets and strips.

Thermally Conductive High-Temperature
Silicone Foam Sheets

Protect sensitive equipment from heat buildup with this silicone foam. These sheets are commonly used to fill gaps and damp vibration in computers, battery installations, and pipe assemblies.

Foam Sample Packs

Foam Material Sample Packs

Foam Hardness Sample Packs

Static-Control Foam

Antistatic Super-Cushioning
Polyurethane Foam Egg-Crate Sheets

These polyurethane foam egg-crate sheets divert static electricity to protect sensitive equipment from damage.

Static-Control Chemical-Resistant
Polyethylene Foam Sheets

Protect electronic components from electrostatic shocks and chemicals while safeguarding them from bumps and drops during shipping and storing.

Static-Control Super-Cushioning
Polyurethane Foam Sheets

Cushion electronic components from impact as you protect them from electrostatic shocks during shipping and storing.

Tool-Organizing Foam

Know at a glance when a tool is missing from a toolbox with this dual-color foam.

Super-Absorbent Foam

Similar to a sponge, this open-cell foam absorbs and holds up to 30 times its weight in liquid.

Chemical-Resistant Foam

Economical Chemical-Resistant Nylon Foam Sheets

An economical alternative to Viton® fluoroelastomer foam, these semi-rigid nylon foam sheets offer good resistance to a wide range of chemicals.

Chemical-Resistant Viton®
Fluoroelastomer Foam Sheets and Strips

Offering excellent resistance to corrosive environments, these Viton® fluoroelastomer foam sheets and strips stand up to a wide variety of chemicals, fuels, and oils.

Impression Foam

Stiff yet moldable, this foam takes the shape of any object that's pressed into it and will never spring back.

High-Temperature Rubber Sheets, Bars, and Strips

High-Temperature Silicone
Rubber Sheets, Bars, and Strips

Fire-Retardant High-Temperature
Silicone Rubber Sheets and Strips

Create a barrier against fire and smoke. These sheets and strips meet FAR 25.856 and UL 94 V-0 for flame retardance.

Thermally Conductive High-Temperature
Silicone Rubber Sheets

Commonly used in electronics applications, these sheets transfer heat better than any other silicone we offer.

High-Strength High-Temperature
Silicone Rubber Sheets and Strips

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

High-Purity High-Temperature
Silicone Rubber Sheets and Strips

These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.

Electrically Conductive High-Temperature
Silicone Rubber Sheets

Filled with carbon black, these sheets won’t generate static charges and divert existing ones away from electronics. Use them as a conductor to protect components from static discharge.

Food Industry High-Temperature
Silicone Rubber Sheets and Strips

Made of FDA-listed materials, these sheets and strips are for use with food.

Fabric-Reinforced High-Temperature
Silicone Rubber Sheets and Strips

One layer of fiberglass cloth is inserted between two layers of silicone rubber to give these sheets and strips the strength to stand up to high stress and flex. Use them as flange gaskets and anywhere heavy compression would squeeze nonreinforced silicone rubber out of place.

Multipurpose Rubber

Ultra-Strength Fabric-Reinforced
Multipurpose Neoprene Rubber Sheets

For every 1/4" of thickness there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

High-Strength Fabric-Reinforced Multipurpose
Neoprene Rubber Sheets and Strips

With one layer of nylon fabric for every 1/16” of thickness, these sheets have the strength to be used as flange gaskets, diaphragm packing, and anywhere heavy compression would squeeze nonreinforced neoprene out of place.

Fabric-Reinforced Multipurpose
Neoprene Rubber Sheets and Strips

These sheets and strips have one layer of cotton/polyester fabric for every 1/16" of thickness, so they maintain their size and shape under heavy compression better than the standard nonreinforced multipurpose neoprene. Use them as gaskets.

High-Strength Multipurpose Neoprene
Rubber Sheets, Bars, and Strips

This rubber has better shock absorbing qualities and will provide longer life than Standard Multipurpose Neoprene.

Flame-Retardant Multipurpose
Neoprene Rubber Sheets and Strips

Meeting transportation industry standards for flames, smoke, and toxicity, these neoprene sheets and strips are used as cushioning pads in panels to reduce vibration and noise.

Static-Dissipative Multipurpose
Neoprene Rubber Sheets and Strips

This neoprene dissipates static electrical charge, which can damage or cause equipment to malfunction.

Nonmarking Multipurpose Neoprene
Rubber Sheets and Strips

While other black rubber can leave a mark after use, these specially formulated neoprene sheets leave no evidence behind.

Ultra-Strength Multipurpose
Neoprene Rubber Sheets and Strips

Stronger and more durable than High-Strength Multipurpose Neoprene, this rubber can handle high-tension applications such as belting.

Food Industry Multipurpose
Neoprene Rubber Sheets and Strips

Made from FDA-listed materials for use with food.

Multipurpose Neoprene Rubber Sheets and Strips

Neoprene is also known as chloroprene. It offers good oil and abrasion resistance.

Multipurpose Neoprene Rubber Tubes

Jackets, seals, and insulation are just a few of the many uses for rubber tubes.

Abrasion-Resistant Rubber, Sheets, Bars, and Strips

Food Industry Abrasion-Resistant
Polyurethane Rubber Sheets and Strips

Use in food-processing environments for cutting surfaces, liners, and other high-wear applications. These sheets and strips are FDA compliant for direct contact with food.

Economical Abrasion-Resistant
SBR Rubber Sheets and Strips

Commonly used for tires, conveyor belts, and chutes, SBR (styrene butadiene rubber) is harder and offers better abrasion resistance than natural rubber.

Abrasion-Resistant Polyurethane
Rubber Sheets, Bars, and Strips

This polyurethane combines the shock absorbing qualities of rubber with the tear resistance of plastic. Use it for high-tension applications such as conveyor belts, as well as for high-wear applications such as cutting surfaces, bumpers, and liners.

Super-Stretchable Abrasion-Resistant
Natural Rubber Sample Packs

Super-Cushioning Abrasion-Resistant
Polyurethane Rubber Sheets and Strips

Even after repetitive compression, these super-soft sheets and strips maintain their cushioning ability. Use them to dampen noise and isolate vibration.

Super-Stretchable Abrasion-Resistant
Natural Rubber Sheets and Strips

These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.

Metal-Backed Abrasion-Resistant
Polyurethane Rubber Sheets

With a thin metal backing, these sheets are good for use in bumpers, wear pads, machinery mounts, and other applications where some structural support is needed.

Fabric-Reinforced Abrasion-Resistant
SBR Rubber Sheets and Strips

With one layer of polyester fabric for every 1/16” of thickness, these sheets and strips maintain their size and shape under heavy compression better than the nonreinforced abrasion-resistant SBR.

Chemical-Resistant Rubber Sheets and Strips

High-Strength Chemical-Resistant Viton®
Fluoroelastomer Rubber Sheets and Strips

Offering higher tensile strength than standard Chemical-Resistant Viton® Fluoroelastomer, these sheets and strips provide greater tear resistance and longer life.

Chemical- and Steam-Resistant Aflas Rubber Sheets

With equal chemical resistance to Viton® fluoroelastomer, Aflas provides a stronger, steam-tolerant alternative.

Chemical-Resistant Low-Temperature
Fluorosilicone Rubber Sheets and Strips

Temperatures as low as –70° F have no effect on these fluorosilicone sheets and strips.

Food Industry Chemical-Resistant Viton®
Fluoroelastomer Rubber Sheets and Strips

Resistant to the chemicals that are commonly used to clean and sterilize food-processing equipment, these sheets and strips are made from FDA-listed materials for use with food and beverage.

Chemical-Resistant Viton®
Fluoroelastomer Rubber Sheets and Strips

Viton® fluoroelastomer stands up to tough chemicals, such as nitric acid, ethylene glycol, and isopropyl alcohol.

Weather-Resistant Rubber

Weather-Resistant EPDM Rubber 90° Angles

Resistant to sunlight, ozone, and water, these 90° angles are good for sealing and cushioning corners.

Weather-Resistant EPDM Rubber Tubes

Used to seal narrow spaces such as channels, these tubes offer more compression than solid EPDM rods.

Flame-Retardant Weather-Resistant
EPDM Rubber Sheets and Strips

These EPDM sheets and strips meet transportation industry standards for flammability, smoke, and toxicity. Use them as weather-resistant seals on windows and doors, pads to reduce vibration between panels, and exterior trim.

Weather-Resistant Airtight
Butyl Rubber Sheets and Strips

Often used as inner tubes, butyl rubber won’t allow air, fumes, or gases to pass through.

Weather-Resistant EPDM Rubber Sheets and Strips

Sunlight, ozone, and water won’t affect these sheets and strips.

Food Industry Steam- and Weather-Resistant
EPDM Rubber Sheets and Strips

Made from FDA-listed materials for use with food and beverage, these EPDM sheets and strips can be used in steamy environments.

Fabric-Reinforced Weather-Resistant
EPDM Rubber Sheets and Strips

For every 1/16" of thickness, there is one layer of super-strong fiberglass cloth that stands up to high stress and flex. Use these sheets and strips as flange gaskets and anywhere heavy compression would squeeze nonreinforced EPDM out of place.

High-Strength Weather-Resistant
EPDM Rubber Sheets and Strips

With greater strength than standard Weather-Resistant EPDM, these sheets and strips provide better shock-absorbing qualities and longer life.

Weather- and Chemical-Resistant
Santoprene Rubber Sheets and Strips

A cross between plastic and rubber, Santoprene offers good resistance to weather and chemicals while retaining its stretchability.

Oil-Resistant Rubber

Food Industry Oil-Resistant
Buna-N Rubber Sheets and Strips

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Food Industry Ultra-Strength Oil-Resistant
Buna-N/Vinyl Rubber Sheets

The addition of vinyl make these sheets the strongest Food Industry Oil-Resistant rubber we offer. Use them for high-tension applications, such as belting. They’re made from FDA-listed materials for use with food and offer good resistance to animal and vegetable oils.

Fabric-Reinforced Oil-Resistant Buna-N Rubber Sheets

To maintain their size and shape under heavy compression, these sheets have one layer of nylon fabric for every 1/16” of thickness. Use them as flange gaskets and diaphragm packing.

Food Industry High-Strength Oil-Resistant
Buna-N Rubber Sheets and Strips

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Ultra-Strength Oil-Resistant
Buna-N Rubber Sheets and Strips

With the greatest tensile strength of all our oil-resistant rubber, these super-strong Buna-N sheets and strips can handle high-tension applications, such as belting.

High-Strength Oil-Resistant
Buna-N Rubber Sheets and Strips

These sheets and strips offer better shock-absorbing qualities and longer life than standard Oil-Resistant Buna-N.

Oil-Resistant Buna-N Rubber Sheets, Bars, and Strips

Buna-N rubber resists fuel oil, hydraulic oil, ethylene glycol, and grease.

Oil-Resistant Buna-N Rubber Tubes

Applications for these tubes include jackets, seals, and insulation.

Oil-Resistant High-Temperature Buna-N Rubber Sheets

Because these sheets and strips are made from peroxide-cured Buna-N rubber, they have better heat resistance than standard Oil-Resistant Buna-N rubber sheets and strips.

Metal-Backed Slippery PTFE

A layer of tin-plated steel adds structural support and makes this PTFE easy to form.

Routing and Suspending

Rail-Mount Vibration-Damping Routing Clamps

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Weld-Mount Vibration-Damping Routing Clamps

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Magnetic Vibration-Damping Routing Clamps

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Felt

Firm Felt Cords

Synthetic Felt

This synthetic felt is an economical alternative to wool felt.

Firm Felt Discs

Hard Felt

Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.

Soft Felt Lining Sheets

Line toolboxes and drawers to cushion and protect small parts.

Soft Felt Sheets and Strips

Firm Felt Sheets and Strips

Accessories and Replacement Parts for Vacuum Lifters

Use sensors, vacuum lifter mounts, and robot adapter plates to add functionality or replace worn cups, pads, and other parts to extend the life of your vacuum lifters.

Expansion Joints

Expansion Joints with Butt-Weld Ends

These joints weld to unthreaded pipe or another butt-weld fitting for a leak-resistant permanent connection.

Expansion Joints with Flanged Ends for High Vibration

These expansion joints have a double-bulb design for extra movement and vibration absorption.

Expansion Joints with Flanged Ends

The flanged ends on these expansion joints rotate for easy bolt hole alignment during installation.

Clamp-On Expansion Joints

Slip these joints over your pipe ends and tighten the band clamps for a secure hold.

Expansion Joints with Sealing
Flanged Ends for Metal Pipe

Expansion Joints with Sealing
Flanged Ends for Plastic Pipe

Clamp-On Expansion Joints for Drain, Waste, and Vent

These joints are designed for vertical use in drain, waste, and vent systems.

Chemical-Resistant Expansion Joints with Flanged Ends

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

High-Temperature All-Metal
Expansion Joints with Flanged Ends

These all-metal expansion joints can handle high temperatures up to 800° F.

High-Temperature Acid-Resistant Silicon-Carbide Ceramic Foam

High-Temperature Acid-Resistant
Silicon-Carbide Ceramic Foam

A silicon carbide coating over a carbon foam base combines the hardness, chemical resistance, and high temperatures silicon carbide is known for with the lightweight versaitility of foam. It’s often used for cores in composite layers and to filter molten metals and corrosive liquids.

Vibration-Damping Snap-In Supports

The ends of these removable supports snap in and compress between panels to reduce vibration of miniature cooling fans in compact electronics.

Dock Bumpers

Vehicle-Mount Bumpers

These dock bumpers absorb shock and prevent damage to docks and vehicles.

Dock-Mount Bumpers

These bumpers are fiber-reinforced for more impact resistance than vehicle-mount bumpers.

Extra-Strength Dock-Mount Bumpers

Multiple layers of shock-absorbing rubber make these bumpers more chip and abrasion resistant than standard dock bumpers.

Vibration-Damping Mounts with Unthreaded Hole

Horizontal-Force Bolt-Down Vibration-DampingMounts with Unthreaded Hole

General Purpose Bolt-Down Vibration-DampingMounts with Unthreaded Hole

Bolt-Down Vibration-Damping Mountswith Unthreaded Hole for Tight Spaces

Fail-Safe Bolt-Down Vibration-DampingMounts with Unthreaded Hole

Light Duty Bolt-Down Vibration-DampingMounts with Unthreaded Hole

Easy-to-Install Vibration-DampingMounts with Unthreaded Hole

General Purpose Vibration-DampingMounts with Unthreaded Hole

Oil-Resistant Vibration-DampingMounts with Unthreaded Hole

Extreme-Temperature Vibration-DampingMounts with Unthreaded Hole

Extreme-Temperature Vibration-DampingMounts with Counterbored Unthreaded Hole

Easy-to-Install Extreme-TemperatureVibration-Damping Mounts with Unthreaded Hole

Chemical-Resistant Vibration-DampingMounts with Unthreaded Hole

Vibration-Damping Mounts with Threaded Hole

General Purpose Bolt-DownVibration-Damping Mounts with Threaded Hole

Fail-Safe Bolt-Down Vibration-DampingMounts with Threaded Hole

Extreme-Force Bolt-Down Vibration-DampingMounts with Threaded Hole

Adjustable Extreme-Force Bolt-DownVibration-Damping Mounts with Threaded Hole

Seismic Bolt-Down Vibration-DampingMounts with Threaded Hole

Chemical-Resistant Vibration-DampingMounts with Threaded Hole and Steel Plate

Chemical-Resistant Vibration-Damping Mountswith Threaded Hole and Corrosion-Resistant Plate

Oil-Resistant Vibration-DampingMounts with Threaded Hole

General Purpose Vibration-Damping Sandwich Mounts

General Purpose Vibration-DampingSandwich Mounts with Stud and Insert

Metric General Purpose Vibration-DampingSandwich Mounts with Stud and Insert

General Purpose Vibration-DampingSandwich Mounts with Studs

Metric General Purpose Vibration-DampingSandwich Mounts with Studs

General Purpose Vibration-DampingSandwich Mounts with Inserts

Metric General Purpose Vibration-DampingSandwich Mounts with Inserts

Corrosion-Resistant Vibration-Damping Sandwich Mounts

Corrosion-Resistant Vibration-DampingSandwich Mounts with Stud and Insert

Metric Corrosion-Resistant Vibration-DampingSandwich Mounts with Stud and Insert

Corrosion-Resistant Vibration-DampingSandwich Mounts with Inserts

Metric Corrosion-Resistant Vibration-DampingSandwich Mounts with Inserts

Corrosion-Resistant Vibration-DampingSandwich Mounts with Studs

Metric Corrosion-Resistant Vibration-DampingSandwich Mounts with Studs

Extreme-Temperature Vibration-Damping Sandwich Mounts

Extreme-Temperature Vibration-DampingSandwich Mounts with Stud and Insert

Metric Extreme-Temperature Vibration-DampingSandwich Mounts with Stud and Insert

Extreme-Temperature Vibration-DampingSandwich Mounts with Studs

Metric Extreme-TemperatureVibration-Damping Sandwich Mounts with Studs

Chemical-Resistant Vibration-Damping Sandwich Mounts

Chemical-Resistant Vibration-DampingSandwich Mounts with Studs

Metric Chemical-Resistant Vibration-DampingSandwich Mounts with Studs

Metric Chemical-Resistant Vibration-DampingSandwich Mounts with Stud and Insert

Chemical-Resistant Vibration-DampingSandwich Mounts with Stud and Insert

Vibration-Damping Grommets, Bushings, and Washers

Ribbed Vibration-Damping Grommets

Extreme-Temperature RibbedVibration-Damping Grommets

Vibration-Damping Grommets

Extreme-Temperature Vibration-Damping Grommets

Ribbed Vibration-Damping Bushings

Extreme-Temperature RibbedVibration-Damping Bushings

Extreme-Temperature Vibration-Damping Bushings

Vibration-Damping Bushings

Vibration-Damping Washers

Extreme-Temperature Vibration-Damping Washers

Vibration-Damping Pads

Vibration-Damping Pads

Vibration-Damping Pads for Precision Equipment

Oil-Resistant Vibration-Damping Pad Packs

Vibration-Damping Pad Packs for Heavy Machinery

Vibration-Damping Pads for Heavy Machinery

Oil-Resistant Vibration-Damping Pads

UV-Resistant Vibration-Damping Pads

UV-Resistant Vibration-Damping Pad Packs

Chemical-Resistant Vibration-Damping Pad Packs

Fabric-Reinforced Vibration-DampingPads for Heavy Machinery

Chemical-Resistant Vibration-Damping Pads

Fabric-Reinforced Vibration-DampingPad Packs for Heavy Machinery

Extreme-Temperature Vibration-Damping Pads

Vibration-Damping Leveling Mounts

Extreme-Force Vibration-DampingLeveling Mounts with Threaded Stud

Quick-Install Vibration-DampingLeveling Mounts with Threaded Stud

Vibration-Damping Leveling Mounts with Threaded Stud

Vibration-Damping Leveling Mounts with Threaded Hole

Heavy Duty Vibration-Damping Leveling Mounts

Corrosion-Resistant Swivel Vibration-DampingLeveling Mounts with Threaded Stud

Swivel Vibration-Damping LevelingMounts with Threaded Hole

Sanitary Swivel Vibration-DampingLeveling Mounts with Threaded Stud

Horizontal-Force Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

General Purpose Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

Bolt-Down Vibration-Damping Mounts
with Unthreaded Hole for Tight Spaces

Fail-Safe Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

Light Duty Bolt-Down Vibration-Damping
Mounts with Unthreaded Hole

Easy-to-Install Vibration-Damping
Mounts with Unthreaded Hole

General Purpose Vibration-Damping
Mounts with Unthreaded Hole

Oil-Resistant Vibration-Damping
Mounts with Unthreaded Hole

Extreme-Temperature Vibration-Damping
Mounts with Unthreaded Hole

Extreme-Temperature Vibration-Damping
Mounts with Counterbored Unthreaded Hole

Easy-to-Install Extreme-Temperature
Vibration-Damping Mounts with Unthreaded Hole

Chemical-Resistant Vibration-Damping
Mounts with Unthreaded Hole

General Purpose Bolt-Down
Vibration-Damping Mounts with Threaded Hole

Fail-Safe Bolt-Down Vibration-Damping
Mounts with Threaded Hole

Extreme-Force Bolt-Down Vibration-Damping
Mounts with Threaded Hole

Adjustable Extreme-Force Bolt-Down
Vibration-Damping Mounts with Threaded Hole

Seismic Bolt-Down Vibration-Damping
Mounts with Threaded Hole

Chemical-Resistant Vibration-Damping
Mounts with Threaded Hole and Steel Plate

Chemical-Resistant Vibration-Damping Mounts
with Threaded Hole and Corrosion-Resistant Plate

Oil-Resistant Vibration-Damping
Mounts with Threaded Hole

General Purpose Vibration-Damping
Sandwich Mounts with Stud and Insert

Metric General Purpose Vibration-Damping
Sandwich Mounts with Stud and Insert

General Purpose Vibration-Damping
Sandwich Mounts with Studs

Metric General Purpose Vibration-Damping
Sandwich Mounts with Studs

General Purpose Vibration-Damping
Sandwich Mounts with Inserts

Metric General Purpose Vibration-Damping
Sandwich Mounts with Inserts

Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Metric Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Inserts

Metric Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Inserts

Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Studs

Metric Corrosion-Resistant Vibration-Damping
Sandwich Mounts with Studs

Extreme-Temperature Vibration-Damping
Sandwich Mounts with Stud and Insert

Metric Extreme-Temperature Vibration-Damping
Sandwich Mounts with Stud and Insert

Extreme-Temperature Vibration-Damping
Sandwich Mounts with Studs

Metric Extreme-Temperature
Vibration-Damping Sandwich Mounts with Studs

Chemical-Resistant Vibration-Damping
Sandwich Mounts with Studs

Metric Chemical-Resistant Vibration-Damping
Sandwich Mounts with Studs

Metric Chemical-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Chemical-Resistant Vibration-Damping
Sandwich Mounts with Stud and Insert

Extreme-Temperature Ribbed
Vibration-Damping Grommets

Extreme-Temperature Ribbed
Vibration-Damping Bushings

Fabric-Reinforced Vibration-Damping
Pads for Heavy Machinery

Fabric-Reinforced Vibration-Damping
Pad Packs for Heavy Machinery

Extreme-Force Vibration-Damping
Leveling Mounts with Threaded Stud

Quick-Install Vibration-Damping
Leveling Mounts with Threaded Stud

Corrosion-Resistant Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Swivel Vibration-Damping Leveling
Mounts with Threaded Hole

Sanitary Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Extreme-Force Swivel Vibration-Damping
Leveling Mounts with Threaded Hole

Swivel Vibration-Damping Leveling
Mounts with Threaded Stud

Bolt-Down Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Extreme-Force Swivel Vibration-Damping
Leveling Mounts with Threaded Stud

Low-Clearance Swivel Vibration-Damping
Leveling Mounts with Threaded Stud