Carts are made of welded steel for maximum durability.

A braided cable on these carts dissipates static charges, making them useful for moving electronics and other static-sensitive equipment.

Keep multimeters, oscilloscopes, and other instruments at a convenient viewing angle and height.

Store, organize, and transport spools of wire and small tools around your jobsite.

Made of strong yet lightweight plastic, these carts have rounded corners to protect walls from damage and a storage compartment near the handle to contain small items.

These carts have easy-to-clean surfaces, lipped shelves to contain spills, and meet NSF/ANSI 2 sanitary standards for food-service applications.

Drawers on these corrosion-resistant carts provide storage for tools and supplies, while the shelves hold larger items.

Organize all your 3D printing tools and supplies in one mobile workstation.

Slide out the tote boxes to access stored materials.

Also known as A/V and audio/visual carts, these carts come with an outlet strip and power cord.

Built-in steps and a compartment designed for light bulbs makes light maintenance easy.

Panels on three sides let you stack material high, while the top shelf can be used as a work surface.

High mesh panels on three sides and an open top allow you to stack tall items while maintaining good visibility and quick access.

Steel wagons are stronger and more durable than wood wagons.

Use the rear hitch on these trailers to pull up to five trailers at the same time. The wheel axle pivots for easy maneuvering.

Gravity keeps long loads centered and balanced—great for pipe, bar stock, and channel.

Wood platforms are quieter, and grip loads and absorb impact better than trucks with a metal platform.

For the most demanding applications, these trucks carry loads of 1,200 lbs. or more.

For added strength, the platform on these trucks is reinforced with steel to handle loads of 1,000 lbs. or more.

These economical trucks carry loads up to 600 lbs.

These trucks have a drive system to move heavy materials without physical stress.

The top rim on these trucks is double-walled to handle the hardest knocks. They are made of lightweight plastic that resists dents, corrosion, and many chemicals.

Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

Hoist these hoppers to move, then open the trapdoor on the bottom to empty.

These versatile hampers have flexible fabric sides that handle wet and dry loads.

Steel reinforcement prevents bulging on these lightweight, dent-resistant plastic trucks.

Built to withstand the heaviest use, these hoppers have thick walls and a 40% thicker frame than other hoppers. Use a forklift to move these perfectly balanced hoppers, then release the locking latch to dump the load. They automatically return to an upright, locked position.

These seamless trucks have a capped drain for easy cleaning and sanitizing, and are made of FDA listed materials for use with food. They resist dents, corrosion, and many chemicals and have ribbed sidewalls for added strength.

Built to withstand the heaviest use, these hoppers have thick walls and a 40% thicker frame than other hoppers. Wheel them around or transport with a forklift. Release the locking latch and these perfectly balanced hoppers dump their load then automatically return to an upright, locked position.

Use these wheelbarrows to move small loads.

Wheel these hoppers around or transport with a forklift. Release the locking latch to dump the load.

A ring around the outside of these dollies supports loads and prevents them from slipping off.

A T-style handle and four swivel casters make these dollies easy to push, pull, and maneuver along walls and aisles.

Sized for overpack drums, these dollies have extra-large platforms to accommodate big loads. They are often used with a sorbent pad to soak up spills and leaks.

The casters on these dollies are mounted outside the platform for increased stability.

Load these trucks from either side to make quick work of moving large quantities of long, flat material such as doors, partitions, and sheet stock.

These easy-to-clean, corrosion-resistant plastic trucks are reinforced with steel for strength. Removable rails allow you to configure them to accommodate a variety of long, flat loads.

These workbenches are dent and rust resistant.

Tilt back these workbenches to roll them anywhere. Open the lid to use it as a work surface.

At 48" wide and greater, these workbenches have a larger work surface and more storage than our standard cabinet workbenches.

Reinforced for strength and durability, these workbenches can hold twice the weight of our standard large-capacity cabinet workbenches.

Turn the crank to adjust the height of these tables without clearing off the top or loosening leg bolts. They can be configured for either seated or standing tasks.

Support 3,000 to 5,000 lbs. with these welded tables. They can be configured for either seated or standing tasks.

The wood top is nonconductive as well as impact and chemical resistant. It can be sanded and refinished. Use these tables to elevate machinery and equipment 24" from the floor.

These durable tables won't warp or splinter. They can be configured at a custom height.

Without a shelf, these tables provide room to pull up a stool or chair. They withstand chemicals, grease, and repeated washdowns for use in laboratories and food-processing areas.

The wood top on these tables is nonconductive, resists impact, and can be sanded and refinished.

Without a shelf, these tables provide room to pull up a stool or chair. The durable steel top won't warp or splinter.

Match these casters to Rubbermaid carts, platform trucks, dump trucks, and dollies.

Easily replace casters on InterMetro carts and shelving—friction holds them in place in the 1" OD posts.

Store bars, spools, and other items on a single versatile rack.

Bins slope slightly and have a lip to keep contents in place.

These one-piece units have an all-welded steel construction to support heavy tools and materials.

This shelving won't rust, dent, peel, or chip.

The three-sided design stabilizes packages and other contents when moving.

These racks, also known as bakery carts and bun racks, are often used for food service, electronics, and small-parts assembly applications.

Remove the stackable cabinet and carry only the tools you need.

Protect against corrosion with these stainless steel cabinets.

Mesh construction provides visibility and air circulation. The hinged lid and drop-front gate allow quick access to large equipment.

Secure all the drawers in these cabinets with a single lock.

These durable cabinets have the thickest steel construction we offer and can hold 1,200 to 1,900 lbs. per shelf.