No need for wiring—these lights plug into a standard wall outlet. Also known as shop lights.

Fit traditional fluorescent ceiling strip lights with LED lights, which use less electricity.

Also known as pendant lights, these fixtures hang from a cord.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Brighten high-traffic areas with our most rugged ceiling lights. Rated IK10, the highest impact resistance rating, they’re protected by a 16-gauge cold-rolled steel frame and polycarbonate lens.

Powered by the sun, these lights illuminate outbuildings, shipping containers, and other remote places that lack electricity.

Upgrade your fluorescent recessed lighting to energy-efficient LEDs without removing fixtures and exposing insulation.

Also known as troffers, these lights fit most standard drop-ceiling grids.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

Often used in stairwells and hallways, these lights save energy by only turning on when they sense movement.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

A sealed lens keeps moisture out to protect these lights against washdowns.

Also known as troffers, these lights fit flush into most drop-ceiling grids. They’re fully sealed with an airtight gasket, so they’re rated IP65 for protection against low-pressure washdowns, humidity, and dust.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Mount these lights in recessed spaces so the lens is flush with the ceiling or wall. NEC Classes I and II, they’re safe to use in paint spray booths, blast booths, and other areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust.

Also known as jelly jar lights. These fixtures have a guard that protects the lens from breaking.

Also known as grow lights, these lights encourage growth in herbs, flowers, and other plants indoors.

Prevent contaminants from entering your ISO Class 3 clean room—these lights have an airtight seal.

Compact and easy to carry, these ETL listed lights stand up to dripping, splashing, and falling liquids. The head adjusts up and down to direct light where it's needed.

Brighten remote areas, even if they’re damp or rainy. These floodlights are IP rated to keep out humidity and dripping, splashing, and falling liquids.

Bring light to remote areas with the DeWalt rechargeable battery that's already in your toolkit.

Raise, lower, and tilt these lights to brighten your work in wet spaces.

Light up remote spaces without having to keep track of a new cordless tool battery. These floodlights run on a Milwaukee M18 battery (sold separately). These lights extend up to 7 ft. tall and have a pivoting head to direct light where you need it.

Brighten remote spaces with the DeWalt rechargeable battery that’s already in your toolkit. These floodlights extend up to 7 ft., and the light head turns at any angle to aim light where it’s needed.

A mounting clip at the base lets you attach these lights to nearby surfaces.

Keep excess cords out of your way—the reel locks the cord at any length and retracts it when not in use.

Hang these lights above your workspace—they shine through long tubes to distribute even light with minimal glare and shadows. Carry them where you need them and suspend them from pipes, beams, and other overhead surfaces.

Light up large, open rooms where you need a quick setup and takedown, such as a room under construction. Just hang these lights from a ceiling up to 30' high and they’re ready to go.

Light up damp areas—these lights seal out moisture and humidity. They’ll even work in areas with frequent washdowns. Rated NEMA 4X, they withstand spraying liquid, resist corrosion, and keep out dust.

Bring light to areas that don't have electrical power service.

Power these lights with the same battery as your other cordless tools. They run on a Milwaukee M18 battery to light up work where there’s no outlet.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service.

Aim light where you need it—even in explosion-prone spaces—by raising, lowering, and tilting these lights on their tripod. Rated NEC Classes I, II, III, and Zone 0, they’re safe to use near ignitable concentrations of flammable or combustible gas, dust, or fibers.

Bring light to explosion-prone work areas. Rated NEC Class I, these lights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

With a slimmer profile than other strip machine lights, these lights fit in tight spots on workspaces and inside machinery because they don’t have a circuit board.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These classic-style machine lights have a reflector to distribute light more evenly than strip machine lights.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration.

Gooseneck arms can be repositioned faster and more easily than articulating arms.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

A motion sensor turns on these lights when an enclosure door is opened. Mount them inside cabinets, closets, and other enclosed spaces.

Powered by the sun, these security lights function in areas that don’t have access to electricity. They’re often used to shine light on parking lots, landscaping, signs, entryways, and other outdoor spaces.

Hardwire these lights to a power source.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Also known as wall packs, these lights mount to exterior walls and ceilings.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Light up your work from under your brim.

Keep your hands free by wearing a flashlight on your head.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes.

Safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust, these lights are rated NEC Class I, II, and III.

With built-in LEDs, these lights deliver all the brightness of larger dock lights in a low-profile design. A hinge stop keeps the arm from extending past the dock door, and the curved design fits around the track.

Rated for use in damp locations, these lights withstand humidity and moisture.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.