About On/Off Valves
More
Plastic On/Off Valves with Push-to-Connect Fittings for Drinking Water



- Valve Type: Plug
- For Use With: Drinking Water
- Seal Material: EPDM Rubber
- Specifications Met: NSF/ANSI 61
Insert tubing into the fittings—no heat, solder, or flux required. These valves meet NSF/ANSI 61 for use in drinking water systems. All are full port, so they do not restrict flow.
For technical drawings and 3-D models, click on a part number.
Pipe Size | For Tube OD | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Port-to-Port Lg. | Each | |
White Polypropylene Plastic Body | |||||||
---|---|---|---|---|---|---|---|
90° Elbow—NPTF Female × Push to Connect | |||||||
1/4 | 1/4" | 230 psi @ 70° F | 35° to 140° | __ | 1 3/8" | 0000000 | 00000 |
1/4 | 3/8" | 145 psi @ 70° F | 35° to 140° | __ | 1 7/8" | 0000000 | 0000 |
Straight—NPTF Male × Push to Connect | |||||||
1/4 | 1/4" | 230 psi @ 70° F | 35° to 140° | 2" | __ | 0000000 | 0000 |
3/8 | 3/8" | 145 psi @ 70° F | 35° to 140° | 2 9/16" | __ | 0000000 | 0000 |
Straight—Push to Connect × Push to Connect | |||||||
__ | 1/4" | 230 psi @ 70° F | 35° to 140° | 1 15/16" | __ | 0000000 | 0000 |
__ | 3/8" | 145 psi @ 70° F | 35° to 140° | 2 1/2" | __ | 0000000 | 0000 |
__ | 6mm | 230 psi @ 70° F | 35° to 140° | 1 15/16" | __ | 0000000 | 00000 |
__ | 8mm | 230 psi @ 70° F | 35° to 140° | 2 1/2" | __ | 0000000 | 00000 |
__ | 10mm | 145 psi @ 70° F | 35° to 140° | 2 1/2" | __ | 0000000 | 00000 |
__ | 12mm | 145 psi @ 70° F | 35° to 140° | 2 3/4" | __ | 0000000 | 00000 |
On/Off Valves with Push-to-Connect Fittings
Insert tubing into the fittings on these valves—no heat, solder, or flux required.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.


- Valve Type: See table
- For Use With: Air, Argon, Helium, Krypton, Neon, Water, Xenon
- Seal Material: EPDM Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
Dark Gray PVC Plastic Body—Ball Valve Type | ||||||||
---|---|---|---|---|---|---|---|---|
Push to Connect × Push to Connect | ||||||||
__ | 1/4" | 0.6 | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 000000 |
__ | 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
__ | 1/2" | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
NPT Female × Push to Connect | ||||||||
1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
1/4 | 3/8" | 1.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
1/4 | 1/2" | 2.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 7/16" | 0000000 | 00000 |
1/2 | 1/4" | 0.6 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 0000000 | 00000 |
1/2 | 3/8" | 1.6 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 0000000 | 00000 |
1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 7/16" | 0000000 | 00000 |
Dark Gray PVC Plastic Body—Plug Valve Type | ||||||||
NPT Female × Push to Connect | ||||||||
1/4 | 1/4" | 0.5 | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
1/4 | 3/8" | Not Rated | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
White Polypropylene Plastic Body—Plug Valve Type | ||||||||
NPT Female × Push to Connect | ||||||||
1/4 | 1/4" | 0.5 | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
1/4 | 3/8" | Not Rated | 125 psi @ 70° F | 35° to 140° | Standard | 1 1/4" | 0000000 | 0000 |
On/Off Valves with Compression Fittings
A compression sleeve bites into tubing as you tighten the nut, forming a strong seal.
Standard-port valves slightly restrict flow.
For technical drawings and 3-D models, click on a part number.

- Valve Type:
Brass Seal: Plug
All Other Valves: Ball - For Use With: See table

- Valve Type: Plug
- For Use With: Air, Water
Compact Threaded On/Off Valves for Fuel



- Valve Type: Plug
- For Use With: Diesel Fuel, Fuel Oil, Kerosene
- Specifications Met: See table
A low-profile handle allows these valves to fit in low-clearance pipelines for diesel fuel, fuel oil, and kerosene.
UL listed valves meet U.S. standards for safe fuel transfer.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Specifications Met | Each | |
Brass Body | ||||||
---|---|---|---|---|---|---|
NPTF Female × NPTF Female | ||||||
1/8 | 15 psi @ 70° F | -30° to 250° | 2" | UL Listed | 00000000 | 000000 |
1/4 | 15 psi @ 70° F | -30° to 250° | 2 1/8" | UL Listed | 0000000 | 00000 |
1/4 | 30 psi @ 70° F | -30° to 250° | 2 1/8" | __ | 0000000 | 00000 |
3/8 | 15 psi @ 70° F | -30° to 250° | 2 9/16" | UL Listed | 00000000 | 00000 |
3/8 | 30 psi @ 70° F | -30° to 250° | 2 9/16" | __ | 00000000 | 00000 |
NPTF Female × NPTF Male | ||||||
1/8 | 15 psi @ 70° F | -30° to 250° | 2" | UL Listed | 00000000 | 00000 |
1/8 | 30 psi @ 70° F | -30° to 250° | 2" | __ | 0000000 | 00000 |
1/4 | 15 psi @ 70° F | -30° to 250° | 2 1/4" | UL Listed | 0000000 | 00000 |
1/4 | 30 psi @ 70° F | -30° to 250° | 2 1/4" | __ | 0000000 | 00000 |
3/8 | 15 psi @ 70° F | -30° to 250° | 2 7/16" | UL Listed | 0000000 | 00000 |
3/8 | 30 psi @ 70° F | -30° to 250° | 2 7/16" | __ | 0000000 | 00000 |
NPTF Male × NPTF Male | ||||||
1/4 | 30 psi @ 70° F | -30° to 250° | 2 1/8" | __ | 00000000 | 00000 |
3/8 | 30 psi @ 70° F | -30° to 250° | 2 9/16" | __ | 00000000 | 00000 |
Threaded On/Off Valves for Natural Gas and Propane
- Valve Type: Plug
- For Use With: Natural Gas, Propane
Also known as plug valves, these are often used as a mainline shutoff in natural gas and propane pipelines.
T-handles resist accidental movement when snagged or bumped.
Lockable T-handles can be fixed in place using a padlock (not included) with a shackle diameter up to 1/2”.
Wrench-operated valves require a wrench (not included) to open and close the valve.
For technical drawings and 3-D models, click on a part number.

Pipe Size | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
Bronze Body | |||||
---|---|---|---|---|---|
NPT Female × NPT Female | |||||
1/4 | 2 psi @ 70° F | 35° to 125° | 1 3/4" | 0000000 | 000000 |
1/4 | 25 psi @ 70° F | 35° to 125° | 1 7/8" | 00000000 | 00000 |
3/8 | 25 psi @ 70° F | 35° to 125° | 1 7/8" | 00000000 | 00000 |
1/2 | 5 psi @ 70° F | 35° to 125° | 2" | 0000000 | 00000 |
1/2 | 25 psi @ 70° F | 35° to 125° | 2 1/8" | 00000000 | 00000 |
3/4 | 5 psi @ 70° F | 35° to 125° | 2 3/8" | 0000000 | 00000 |
1 | 2 psi @ 70° F | 35° to 125° | 2 3/4" | 0000000 | 00000 |
1 1/4 | 2 psi @ 70° F | 35° to 125° | 3 1/4" | 0000000 | 00000 |

Pipe Size | Max. Pressure | Temperature Range, °F | End-to-End Lg. | For Max. Shackle Dia. | Each | |
Cast Iron Body | ||||||
---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||
1/2 | 175 psi @ 70° F | -20° to 150° | 2 7/8" | 1/2" | 00000000 | 000000 |
3/4 | 175 psi @ 70° F | -20° to 150° | 3 1/8" | 1/2" | 00000000 | 00000 |
1 | 175 psi @ 70° F | -20° to 150° | 3 3/8" | 1/2" | 00000000 | 00000 |
1 1/4 | 175 psi @ 70° F | -20° to 150° | 3 7/8" | 1/2" | 00000000 | 00000 |
1 1/2 | 175 psi @ 70° F | -20° to 150° | 4 5/8" | 1/2" | 00000000 | 000000 |
2 | 175 psi @ 70° F | -20° to 150° | 5 5/8" | 1/2" | 00000000 | 000000 |

Pipe Size | Max. Pressure | Temperature Range, °F | End-to-End Lg. | Each | |
Bronze Body | |||||
---|---|---|---|---|---|
NPT Female × NPT Female | |||||
1/2 | 5 psi @ 70° F | 35° to 125° | 2" | 00000000 | 000000 |
1/2 | 25 psi @ 70° F | 35° to 125° | 2 1/8" | 00000000 | 00000 |
3/4 | 5 psi @ 70° F | 35° to 125° | 2 3/8" | 00000000 | 00000 |
1 | 2 psi @ 70° F | 35° to 125° | 2 3/4" | 00000000 | 00000 |
1 1/2 | 2 psi @ 70° F | 35° to 125° | 3 3/8" | 00000000 | 00000 |
2 | 2 psi @ 70° F | 35° to 125° | 4 3/8" | 00000000 | 000000 |