Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

As small as a hockey puck and compatible with standard 12-volt vehicle plugs, these strobe lights are inconspicuous when not in use and quick to connect.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

Screw into a standard medium-base light socket.

Set these portable lights wherever you need a signal light—they don't need to be wired or plugged in.

Direct your signal with these lights; they flash in one direction.

These lights cycle through three different flashing patterns.

Quickly position these portable flashing lights using the magnetic base to draw attention to hazards in areas such as docks and railroad crossings. They are battery operated, so they do not need to be wired or plugged in.

Carry these lights around with you and place them wherever needed. They can switch between being continuous or flashing.

Mount these lights to the top of towers to warn low-flying aircraft.

Make a custom panel light with your choice of light and lens cap color.

Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

These lights are rated IP69K to withstand high-pressure washdowns, such as those in food and beverage applications.

The buzzer warns workers of hazards even when they’re outside a direct line of sight.

The revolving motion of the light makes these more visible than flashing lights.

Buzzers meet NEMA 4X for protection and corrosion resistance in washdown environments.

Buzzers are UL listed for use in environments where flammable gases, combustible dust, and combustible fibers may be present.

Horns are UL and C-UL listed for indoor and outdoor use in Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Division 2 hazardous locations.

When this horn runs out of air, recharge it with the included pump.

These horns have disposable canisters that can be replaced when the propellant is gone.

The built-in motor-driven fan in these sirens generates a shrill tone that's audible over long distances.

These whistles operate with the press of a button instead of your mouth, allowing multiple people to use them while lowering the risk of spreading germs.

These lights have lenses that snap in and out, so you can easily swap colors or change their position in the stack.

Use these lights in tight spaces in place of a tower. They emit three colors from a single lens.

Design a stack light with your choice of light pattern and color. Start with a base, then add up to five modules total—twist and lock them together.

The quick-connect four-pole M12 plug on these lights makes them easy to hook up and configure.

These lights have LED bulbs for years of maintenance-free operation and can be wired as either continuous or flashing.

Get notified about equipment issues even when you aren't around your machines. These lights connect to your computer via Ethernet, allowing you to set up email alerts when there is a problem with a machine, server, or conveyor.

When motion is detected from both directions at a two-way corner, these lights flash to alert personnel and prevent collisions.

Add these lights to a forklift to improve safety. They contain a turn light, brake light, and backup light.

This horn has a built-in compressor, similar to that in a car horn, for a louder sound than other lift truck horns.