Grit Grit |
---|
For Finish For Finish |
---|
|
Abrasive Backing Material Abrasive Backing Material |
---|
|
Sanding Properties Sanding Properties |
---|
|
More
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
---|---|---|---|---|---|---|
For Smooth Finish | ||||||
220 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
230 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Extra-Smooth Finish | ||||||
240 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
260 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
280 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
320 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
800 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1200 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Smooth Finish | ||||||
220 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
230 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Extra-Smooth Finish | ||||||
240 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
260 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
280 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
320 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
800 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1000 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1200 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1500 | Stainless Steel, Titanium, Steel, Iron, Nickel | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Includes | No. of Pieces | For Use On | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
---|---|---|---|---|---|---|
One each 220, 230, 240, 260, 280, 320, 500, 800, 1000, 1200, 1500-grit Silicon Carbide Pads One each 2000, 2500-grit Aluminum Oxide Pads | 13 | Stainless Steel, Titanium, Steel, Iron, Nickel | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | ||||||
One each 220, 230, 240, 260, 280, 320, 500, 800, 1000, 1200, 1500-grit Silicon Carbide Pads One each 2000, 2500-grit Aluminum Oxide Pads | 13 | Stainless Steel, Titanium, Steel, Iron, Nickel | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Grit | For Use On | Abrasive Material | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
---|---|---|---|---|---|---|
For Extra-Smooth Finish | ||||||
400 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 00000 |
For Polished Finish | ||||||
600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
800 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1200 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1350 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1500 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
2000 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
3" × 4" | ||||||
For Extra-Smooth Finish | ||||||
400 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
For Polished Finish | ||||||
600 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
800 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1200 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1350 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
1500 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
2000 | Steel, Wood | Silicon Carbide | Cloth and Foam | Water Resistant, Tear Resistant | 00000000 | 0000 |
Sized for tight spaces, these small pads sand flat and curved surfaces. They have a flexible foam layer that gives you more control over sanding pressure, creating finer and more consistent finishes. The abrasive is on the top and bottom. Pads resist deterioration when used wet or with grease, chemicals, cutting fluids, and other solvents that may be present when sanding.
Includes | No. of Pieces | For Use On | Abrasive Backing Material | Sanding Properties | Each | |
2" × 2" | ||||||
---|---|---|---|---|---|---|
One each 400, 600, 800, 1200, 1350, 1500, 2000-grit Silicon Carbide Pads One each 2500, 3000-grit Aluminum Oxide Pads | 9 | Steel, Wood | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 000000 |
3" × 4" | ||||||
One each 400, 600, 800, 1200, 1350, 1500, 2000-grit Silicon Carbide Pads One each 2500, 3000-grit Aluminum Oxide Pads | 9 | Steel, Wood | Cloth and Foam | Water Resistant, Tear Resistant | 000000 | 00000 |
A coating prevents dust and debris from building up on the abrasive surface. Flexible enough to sand around curves and in corners, these sponges provide the comfort and control of a sanding block. They have abrasive on all four sides.
36 and 60 Grit—Use for paint stripping.
Providing the control of a sanding block while remaining flexible, these sponges sand around curves and in corners. They have abrasive on the top and bottom.
Grit | Wd. | Lg. | Thick. | For Use On | Abrasive Material | Abrasive Backing Material | Each | |
For Smooth Finish | ||||||||
---|---|---|---|---|---|---|---|---|
100 | 3 3/4" | 4 3/4" | 1/2" | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Silicon Carbide | Foam | 00000000 | 00000 |
150 | 3 3/4" | 4 3/4" | 1/2" | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Silicon Carbide | Foam | 00000000 | 0000 |
220 | 3 3/4" | 4 3/4" | 1/2" | Aluminum, Brass, Bronze, Copper, Plastic, Rubber | Silicon Carbide | Foam | 00000000 | 0000 |