Container Type Container Type |
---|
![]() | ![]() |
Tube | Grease Gun Cartridge |
![]() | ![]() |
Aerosol Can | Pail |
![]() | ![]() |
Syringe | Jug |
![]() | |
Spray Bottle |
For Use On For Use On |
---|
Additive Additive |
---|
|
|
Lubricant Type Lubricant Type |
---|
|
Trade Name Trade Name |
---|
Base Oil Base Oil |
---|
|
Specifications Met Specifications Met |
---|
|
Thickener Thickener |
---|
|
|
Container Size Container Size |
---|
Minimum Temperature Minimum Temperature |
---|
|
|
|
Electrical Properties Electrical Properties |
---|
|
More
More
More
Thickened with silica, this heavy grease clings to parts so it won't wash off in wet environments. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening.
Grease lubricates most efficiently within the listed temperature range.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp. | Color | Each | |
DuPont Molykote 112 High Performance—Silica Thickener | ||||||||
3 | Synthetic | 5.3 | Tube | -40° to 450° | Not Rated | White | 0000000 | 000000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size, oz. | Type | Temp. Range, °F | Melting Temp. | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 112 High Performance—Silica Thickener | |||||||||
3 | Synthetic | 5.3 | Tube | -40° to 450° | Not Rated | White | 12 | 00000000 | 0000000 |
A firm consistency and resistance to evaporation make this grease ideal for vacuum applications, such as flow meters, vacuum and pressure systems, and laboratory equipment. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3 is about the consistency of vegetable shortening and is comparable to Fomblin grease. NLGI 4 is about the consistency of frozen yogurt.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Each | |
DuPont Molykote High Vacuum Grease—Silica Thickener | |||||||||
3-4 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | 0000000 | 000000 |
3-4 | Synthetic | 8 lbs. | Pail | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | 0000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Maximum Vacuum @ Temperature | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote High Vacuum Grease—Silica Thickener | ||||||||||
3-4 | Synthetic | 5.3 oz. | Tube | -40° to 400° | Nonmelting | 10^-6 torr @ 72° F | White | 12 | 00000000 | 0000000 |
Fluorocarbon and fluorinated polymer thickeners add chemical resistance to this grease. It remains intact when exposed to water and most solvents and chemicals. Apply directly to plastic and rubber seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with PTFE has small particles of PTFE that reduce friction and help the grease maintain its lubricity. It’s not for use with ketones, such as acetone and MEK.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
DuPont Molykote 3452 Chemical Resistant—Fluorocarbon Thickener | ||||||||||
2-3 | Synthetic | Moly | 2 | Tube | -20° to 450° | 570° | White | __ | 0000000 | 000000 |
2-3 | Synthetic | Moly | 19.4 | Grease Gun Cartridge | -20° to 450° | 570° | White | __ | 0000000 | 000000 |
Fluorinated Polymer Thickener | ||||||||||
3 | Synthetic | PTFE | 3.5 | Tube | -20° to 450° | 570° | White | MIL-PRF-27617, SAE AS8660 | 0000000 | 00000 |
3 | Synthetic | PTFE | 19.4 | Grease Gun Cartridge | -20° to 450° | 570° | White | MIL-PRF-27617, SAE AS8660 | 0000000 | 000000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Pkg. Qty. | Pkg. | |
DuPont Molykote 3452 Chemical Resistant—Fluorocarbon Thickener | |||||||||||
2-3 | Synthetic | Moly | 2 | Tube | -20° to 450° | 570° | White | __ | 12 | 00000000 | 0000000 |
Fluorinated Polymer Thickener | |||||||||||
3 | Synthetic | PTFE | 3.5 | Tube | -20° to 450° | 570° | White | MIL-PRF-27617, SAE AS8660 | 12 | 0000000 | 000000 |
Apply directly to seals and O-rings to extend service life by preventing drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and withstands a wider range of temperatures.
Grease with lithium thickener offers good heat and moisture resistance. Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
DuPont Molykote 55 O-Ring Grease is silicone-based, so it can be used with most rubbers and plastics. Not recommended for use with silicone rubber, polycarbonate plastic, or ABS plastic.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont Molykote 55 O-Ring Grease—Lithium Thickener | |||||||||
2 | Synthetic | Moly | 5.3 oz. | Tube | -85° to 350° | 425° | White | 0000000 | 000000 |
2 | Synthetic | Moly | 8 lbs. | Pail | -85° to 350° | 425° | White | 0000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 55 O-Ring Grease—Lithium Thickener | ||||||||||
2 | Synthetic | Moly | 5.3 oz. | Tube | -85° to 350° | 425° | White | 12 | 00000000 | 0000000 |
This thin grease goes on as a film to form a seal in glass and metal stop cocks. It won't react with laboratory chemicals, such as hydrochloric acid, sulfuric acid, potassium hydroxide, and salt solutions.
Grease lubricates most efficiently below the maximum temperature. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
This grease meets NSF/ANSI Standard 51 and FDA Compliant 21 CFR 175.300 for direct contact with food and NSF/ANSI Standard 61 for use with components that come into contact with drinking water. Formulated with silica thickener and silicone, it resists washing away and has excellent resistance to wear. Apply directly to seals and O-rings to prevent drying and cracking.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 3-4 is between the consistencies of vegetable shortening and frozen yogurt.
Grease lubricates most efficiently within the listed temperature range.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp. | Color | Specifications Met | Each | |
DuPont Molykote 111 Compound—Silica Thickener | ||||||||||
3-4 | Synthetic | Silicone | 5.3 oz. | Tube | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 000000 |
3-4 | Synthetic | Silicone | 14 oz. | Grease Gun Cartridge | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 00000 |
3-4 | Synthetic | Silicone | 8 lbs. | Pail | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 0000000 | 000000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp. | Color | Specifications Met | Pkg. Qty. | Pkg. | |
DuPont Molykote 111 Compound—Silica Thickener | |||||||||||
3-4 | Synthetic | Silicone | 5.3 oz. | Tube | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 12 | 00000000 | 0000000 |
3-4 | Synthetic | Silicone | 14 oz. | Grease Gun Cartridge | -40° to 400° | Not Rated | White | FDA Compliant 21 CFR 175.300, NSF/ANSI 51, NSF/ANSI 61 | 10 | 00000000 | 000000 |
Use this grease in areas where there is the possibility of contact with food. Also known as dielectric grease, it lubricates and protects electrical systems. It resists water and corrosion. This grease can be used on most rubber and plastic.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter. Dielectric strength measures the maximum voltage a grease can withstand without losing its insulating properties. The higher the dielectric strength, the better its quality as an insulator.
Grease that is NSF Registered H1 and grease that meets FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food. Grease lubricates most efficiently below the maximum temperature. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Dielectric Strength, V/mil | Color | Specifications Met | Each | |
Silica Thickener | ||||||||||
1 | Synthetic | Silicone | 1 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 0000000 | 00000 |
1 | Synthetic | Silicone | 4 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 0000000 | 00000 |
Nonmelting Grease without Thickener | ||||||||||
2 | Synthetic | Silicone | 3 oz. | Tube | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 00000 |
2 | Synthetic | Silicone | 14.1 oz. | Grease Gun Cartridge | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 00000 |
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Dielectric Strength, V/mil | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Silica Thickener | |||||||||||
1 | Synthetic | Silicone | 4 oz. | Tube | -40° to 400° | 350 | Clear | NSF Registered H1 | 12 | 00000000 | 0000000 |
Nonmelting Grease without Thickener | |||||||||||
2 | Synthetic | Silicone | 3 oz. | Tube | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 12 | 0000000 | 000000 |
2 | Synthetic | Silicone | 14.1 oz. | Grease Gun Cartridge | -40° to 500° | 400 | White | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 12 | 0000000 | 000000 |
A high silver content gives this grease excellent conductivity for applications where electricity and heat transfer are required. It is suitable for ESD (electrostatic discharge) and EMI (electromagnetic interference) shielding applications.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Electrical resistivity is a measure of how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size, oz. | Type | Temp. Range, °F | Melting Temp., °F | Electrical Resistivity, ohms-cm | Thermal Conductivity | Color | Each | |
Silicone Thickener | |||||||||||
Not Rated | Synthetic | 100% Silver | 0.2 | Syringe | -70° to 485° | 490° | 0.010 | 40 Btu/hr. × in./sq. ft./°F | Silver | 0000000 | 000000 |
Use this general-purpose grease to lubricate most machinery.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with silicone thickener has excellent heat and moisture resistance and good oxidation resistance. It is NSF registered H1 for incidental food contact.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Silicone Thickener | |||||||||
2 | Synthetic | 14 oz. | Grease Gun Cartridge | 0° to 400° | 400° | Blue | NSF Registered H1 | 000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Silicone Thickener | ||||||||||
2 | Synthetic | 14 oz. | Grease Gun Cartridge | 0° to 400° | 400° | Blue | NSF Registered H1 | 12 | 00000000 | 0000000 |
Use this grease in food-processing and preparation areas.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2 is about the consistency of peanut butter.
Grease that is NSF registered H1 and grease that meets FDA 21 CFR 178.3570 are rated for incidental contact with food. Synthetic-oil-based grease lasts longer than mineral-oil-based grease and generally withstands a wider range of temperatures. Grease with silicone thickener has excellent heat and moisture resistance and good oxidation resistance.
Grease lubricates most efficiently within the listed temperature range. Nonmelting grease can be used at temperatures above the maximum temperature briefly, but then will break down more quickly.
Molykote withstands high loads and has good wear resistance.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Each | |
Silicone Thickener | |||||||||
1 | Synthetic | 14 oz. | Grease Gun Cartridge | -40° to 400° | Nonmelting | Clear | NSF Registered H1 | 0000000 | 000000 |
2 | Synthetic | 14 oz. | Grease Gun Cartridge | -40° to 400° | Nonmelting | Clear | NSF Registered H1 | 0000000 | 00000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Specifications Met | Pkg. Qty. | Pkg. | |
Silicone Thickener | ||||||||||
1 | Synthetic | 14 oz. | Grease Gun Cartridge | -40° to 400° | Nonmelting | Clear | NSF Registered H1 | 12 | 00000000 | 0000000 |
2 | Synthetic | 14 oz. | Grease Gun Cartridge | -40° to 400° | Nonmelting | Clear | NSF Registered H1 | 12 | 00000000 | 000000 |
This grease is wear resistant for use in a wide range of bearing types.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.
Grease with lithium thickener offers good heat and moisture resistance.
Grease with moly (molybdenum disulfide) has excellent resistance to wear and can withstand high-load and high-pressure applications. Grease with silicone can be used with most plastic and rubber parts under light loads.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
DuPont Molykote grease withstands high loads and has good wear resistance.
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
DuPont Molykote 44 Medium High Temperature—Lithium Thickener | |||||||||
2 | Synthetic | Moly, Silicone | 5.3 oz. | Tube | -40° to 400° | 430° | White | 0000000 | 000000 |
2 | Synthetic | Moly, Silicone | 14 oz. | Grease Gun Cartridge | -40° to 400° | 430° | White | 0000000 | 00000 |
2 | Synthetic | Moly, Silicone | 8 lbs. | Pail | -40° to 400° | 430° | White | 0000000 | 000000 |
Container | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
NLGI Viscosity Grade | Base Oil | Additive | Size | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
DuPont Molykote 44 Medium High Temperature—Lithium Thickener | ||||||||||
2 | Synthetic | Moly, Silicone | 5.3 oz. | Tube | -40° to 400° | 430° | White | 12 | 00000000 | 0000000 |
2 | Synthetic | Moly, Silicone | 14 oz. | Grease Gun Cartridge | -40° to 400° | 430° | White | 10 | 00000000 | 000000 |
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants with PTFE provide long-lasting lubrication. Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic.
Lubricants that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).
LPS Silicone dries to leave a clear, dry film that protects and lubricates. These silicone lubricants are NSF registered H1 for incidental food contact.
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
LPS Silicone | |||||||
13 oz. | Aerosol Can | Silicone | -40° to 390° | NSF Registered H1 | Canada | 00000000 | 000000 |
5 gal. | Pail | Silicone | -40° to 390° | NSF Registered H1 | Canada | 00000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
LPS Silicone | ||||||||
13 oz. | Aerosol Can | Silicone | -40° to 390° | NSF Registered H1 | Canada | 12 | 000000000 | 0000000 |
Sprayon LU 910 Food Grade Silicone withstands high temperatures.
Container | ||||||
---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Each | |
Sprayon LU 910 Food Grade Silicone | ||||||
12 oz. | Aerosol Can | Silicone | -55° to 575° | CA | 0000000 | 00000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Sprayon LU 910 Food Grade Silicone | |||||||
12 oz. | Aerosol Can | Silicone | -55° to 575° | CA | 12 | 0000000 | 000000 |
All DuPont Teflon® lubricants contain PTFE for long-lasting lubrication.DuPont Teflon® Silicone repels moisture and is nonstaining.
Container | ||||||
---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Each | |
DuPont Teflon® Silicone | ||||||
14 | Aerosol Can | PTFE, Silicone | -40° to 400° | Canada | 0000000 | 00000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Temp. Range, °F | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
DuPont Teflon® Silicone | |||||||
14 | Aerosol Can | PTFE, Silicone | -40° to 400° | Canada | 6 | 00000000 | 000000 |
3M Silicone dries fast and is nonstaining. It is FDA Compliant for incidental contact with food.
Container | ||||||
---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Each | |
3M Silicone | ||||||
13.4 | Aerosol Can | Silicone | -25° to 350° | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
3M Silicone | |||||||
13.4 | Aerosol Can | Silicone | -25° to 350° | FDA Compliant 21 CFR 178.3570 | 12 | 000000000 | 0000000 |
For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 or FDA compliant for incidental food contact. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
Lubricants with silicone are clear, have excellent water resistance, and can be used on rubber. Not for use on painted surfaces.
Container | ||||||
---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Specifications Met | Each | |
Sprayon LU 210 Food Grade Dry Silicone | ||||||
10 oz. | Aerosol Can | Silicone | -40° to 450° | NSF Registered H1 | 0000000 | 00000 |
14 oz. | Spray Bottle | Silicone | -40° to 450° | NSF Registered H1 | 0000000 | 00000 |
Lubricants | ||||||
11 oz. | Aerosol Can | Silicone | -55° to 390° | NSF Registered H1 | 0000000 | 00000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Type | Additive | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Sprayon LU 210 Food Grade Dry Silicone | |||||||
10 oz. | Aerosol Can | Silicone | -40° to 450° | NSF Registered H1 | 12 | 0000000 | 000000 |
14 oz. | Spray Bottle | Silicone | -40° to 450° | NSF Registered H1 | 12 | 0000000 | 000000 |
Lubricants | |||||||
11 oz. | Aerosol Can | Silicone | -55° to 390° | NSF Registered H1 | 12 | 00000000 | 000000 |
Apply directly to seals and O-rings to extend service life by preventing drying and cracking. This oil can be used with virtually any rubber polymer, including Buna-N and neoprene.
Viscosity is the thickness of an oil. Rated at 100,000 centistokes (cSt), this oil has the consistency of honey, so it stays in place.
Container | |||||||
---|---|---|---|---|---|---|---|
Viscosity, cSt | Size, oz. | Type | Temp. Range, °F | Color | With Detergent | Each | |
Silicone Synthetic Base Oil | |||||||
100,000 | 2 | Tube | -65° to 400° | Clear | No | 0000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Viscosity, cSt | Size, oz. | Type | Temp. Range, °F | Color | With Detergent | Pkg. Qty. | Pkg. | |
Silicone Synthetic Base Oil | ||||||||
100,000 | 2 | Tube | -65° to 400° | Clear | No | 12 | 00000000 | 0000000 |
Spray these wear-resistant lubricants on rollers, hinges, and tracks of overhead doors to reduce friction and noise. PTFE provides excellent lubricity, while silicone repels water for use outdoors. Once dry, these lubricants form a thin lubricating layer that won’t rub off or attract dust.
These lubricants go on wet for easy application. Once dry, they form a nonstick film that won't attract dust. Use them for general purpose lubricating in most applications.
Lubricants with silicone are clear, have excellent water resistance, and can be used on most rubber and plastic.
DuPont Molykote 557 Silicone Dry Film is often used on blades to keep them sharp longer.
Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.
Lubricants with silicone can be used with plastic.
Container | ||||||
---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Each | |
Sprayon LU 211 Food Grade Dry Silicone | ||||||
13.3 | Aerosol Can | Silicone | -40° to 450° | FDA 21 CFR 178.3570, NSF Registered H1 | 0000000 | 00000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Sprayon LU 211 Food Grade Dry Silicone | |||||||
13.3 | Aerosol Can | Silicone | -40° to 450° | FDA 21 CFR 178.3570, NSF Registered H1 | 12 | 0000000 | 000000 |
Prevent packages from sticking on conveyor rails and chutes. Made with silicone, use these lubricants to create a slippery dry film that won’t attract dust where metal and non-metal surfaces meet.
Also known as paintable mold-release lubricants, these lubricants don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
Lubricants with silicone have a small amount of silicone for lubricity, but still allow you to paint molded parts without cleaning first.
Use these lubricants to release large, intricate, or difficult-to-release parts. Also known as paintable mold-release lubricants, they don’t leave a residue, so you can paint or finish the molded part without the need to clean it. Apply them to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing.
Container | ||||||
---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Max. Temp., °F | Compatible With | Each | |
Sprayon MR 307 Heavy Duty Paintable Release Agent | ||||||
12 | Aerosol Can | Silicone | 550° | Plastic | 0000000 | 000000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Size, oz. | Type | Additive | Max. Temp., °F | Compatible With | Pkg. Qty. | Pkg. | |
Sprayon MR 307 Heavy Duty Paintable Release Agent | |||||||
12 | Aerosol Can | Silicone | 550° | Plastic | 12 | 0000000 | 0000000 |
Apply these lubricants to molds before casting so you can easily remove cast parts and prevent sticking, stretching, and tearing. They leave a residue, so they shouldn’t be used on parts that need to be painted.
Lubricants with silicone can be used with rubber and plastic. Sprayon MR 315 Urethane & Styrene Silicone Release Agent can be used with sensitive plastic, such as styrene and urethane.