Shape Shape |
|---|
 |  |
| Round Tube | Rod and Disc |
 | |
| Sheet and Bar |
Material Material |
|---|
|
Diameter Diameter |
|---|
|
|
|
Filler Material Filler Material |
|---|
|
Certificate Certificate |
|---|
 | |
Fabrication Fabrication |
|---|
|
Yield Strength Yield Strength |
|---|
|
|
Hardness Hardness |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (DefenseAcquisition Regulations Supplement)  |
|---|
Density Density |
|---|
|
About Copper, Brass, and Bronze
More
About Stainless Steel
More
Oil-Filled 841 Bearing Bronze Tubes
- Yield Strength: 11,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades. These tubes are oversized on the outside and undersized on the inside to allow for finishing to the sizes listed.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| OD | ID | 3" Lg. | 6 1/2" Lg. | |
3/16" Wall Thick. | ||||
|---|---|---|---|---|
| 1" | 5/8" | 00000000 | ||
1/4" Wall Thick. | ||||
| 1" | 1/2" | 00000000 | ||
| 1 1/8" | 5/8" | 00000000 | ||
| 1 1/4" | 3/4" | 00000000 | ||
| 1 3/8" | 7/8" | 00000000 | ||
| 1 1/2" | 1" | 00000000 | ||
| 1 3/4" | 1 1/4" | 00000000 | ||
| 2" | 1 1/2" | 00000000 | ||
| 2 1/4" | 1 3/4" | 00000000 | ||
5/16" Wall Thick. | ||||
| 1 1/8" | 1/2" | 00000000 | ||
| 1 1/4" | 5/8" | 00000000 | ||
| 1 1/2" | 7/8" | 00000000 | ||
| 1 5/8" | 1" | 00000000 | ||
3/8" Wall Thick. | ||||
| 1 1/4" | 1/2" | 00000000 | ||
| 1 3/8" | 5/8" | 00000000 | ||
| 1 1/2" | 3/4" | 00000000 | ||
| 1 3/4" | 1" | 00000000 | ||
| 2" | 1 1/4" | 00000000 | ||
| 2 1/4" | 1 1/2" | 00000000 | ||
| 2 1/2" | 1 3/4" | 00000000 | ||
| 2 3/4" | 2" | 00000000 | ||
| 3" | 2 1/4" | 00000000 | ||
| 3 3/4" | 3" | 00000000 | ||
7/16" Wall Thick. | ||||
| 1 1/2" | 5/8" | 00000000 | ||
1/2" Wall Thick. | ||||
| 1 1/2" | 1/2" | 00000000 | ||
| 1 3/4" | 3/4" | 00000000 | ||
| 2" | 1" | 00000000 | ||
| 2 1/4" | 1 1/4" | 00000000 | ||
| 2 1/2" | 1 1/2" | 00000000 | ||
| 2 3/4" | 1 3/4" | 00000000 | ||
| 3" | 2" | 00000000 | ||
| 3 1/4" | 2 1/4" | 00000000 | ||
| 3 1/2" | 2 1/2" | 00000000 | ||
| 4" | 3" | 00000000 | ||
| OD | ID | 3" Lg. | 6 1/2" Lg. | |
5/8" Wall Thick. | ||||
|---|---|---|---|---|
| 2" | 3/4" | 00000000 | ||
| 2 1/2" | 1 1/4" | 00000000 | ||
| 3" | 1 3/4" | 00000000 | ||
| 3 3/4" | 2 1/2" | 00000000 | ||
11/16" Wall Thick. | ||||
| 2" | 5/8" | 00000000 | ||
3/4" Wall Thick. | ||||
| 2" | 1/2" | 00000000 | ||
| 2 1/2" | 1" | 00000000 | ||
| 3" | 1 1/2" | 00000000 | ||
| 4" | 2 1/2" | 00000000 | ||
7/8" Wall Thick. | ||||
| 3" | 1 1/4" | 00000000 | ||
| 3 1/2" | 1 3/4" | 00000000 | ||
1" Wall Thick. | ||||
| 3" | 1" | 00000000 | ||
| 4" | 2" | 00000000 | ||
| 4 1/2" | 2 1/2" | 00000000 | ||
| 5" | 3" | 00000000 | ||
| 6" | 4" | 00000000 | ||
| 7" | 5" | 00000000 | ||
1 1/2" Wall Thick. | ||||
| 6" | 3" | 00000000 | ||
Oil-Filled 841 Bearing Bronze Rods
- Yield Strength: 11,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Tolerance Rating | 2" Lg. | 3" Lg. | 6 1/2" Lg. | |
| 1/4" | Oversized | 0000000 | |||
| 3/8" | Oversized | 0000000 | |||
| 1/2" | Oversized | 0000000 | |||
| 5/8" | Oversized | 0000000 | |||
| 3/4" | Oversized | 0000000 | |||
| 7/8" | Oversized | 0000000 | |||
| 1" | Oversized | 0000000 | |||
| 1 1/8" | Oversized | 0000000 | |||
| 1 1/4" | Oversized | 0000000 | |||
| 1 3/8" | Oversized | 0000000 | |||
| 1 1/2" | Oversized | 0000000 | |||
| 1 5/8" | Oversized | 0000000 | |||
| 1 3/4" | Oversized | 0000000 | |||
| 2" | Oversized | 0000000 | |||
| 2 1/4" | Oversized | 0000000 | |||
| 2 1/2" | Oversized | 0000000 | |||
| 3" | Oversized | 0000000 | |||
| 4" | Oversized | 0000000 | |||
| 5" | Oversized | 0000000 | |||
| 6" | Oversized | 0000000 |
Oil-Filled 840 and 841 Bearing Bronze Sheets
- Yield Strength:
840 Bearing Bronze: 7,000 psi
841 Bearing Bronze: 11,000 psi - Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Thick. | Thick. Tolerance Range | Material | Each | |
5" × 6" | ||||
|---|---|---|---|---|
| 1/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/16" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 00000 |
| 1/4" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 00000 |
| 3/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 00000 |
| 1/2" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 5/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/4" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 1" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
5" × 8 1/8" | ||||
| 1/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/16" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 1/4" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 1/2" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/4" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 1" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
6" × 12" | ||||
| 1/8" | -0.01" to 0.01" | 841 Bearing Bronze | 0000000 | 000000 |
| 3/16" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 1/4" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 3/8" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 1/2" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 5/8" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 3/4" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
| 1" | -0.01" to 0.01" | 840 Bearing Bronze | 0000000 | 000000 |
High-Temperature Graphite-Filled 841 Bearing Bronze Tubes
- Yield Strength: 8,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
4" Lg. | ||||
|---|---|---|---|---|
| OD | Tolerance Rating | ID | Each | |
3/16" Wall Thick. | ||||
| 1" | Oversized | 5/8" | 0000000 | 000000 |
1/4" Wall Thick. | ||||
| 1" | Oversized | 1/2" | 0000000 | 00000 |
| 1 1/8" | Oversized | 5/8" | 0000000 | 00000 |
| 1 1/4" | Oversized | 3/4" | 0000000 | 00000 |
| 1 1/2" | Oversized | 1" | 0000000 | 00000 |
| 1 3/4" | Oversized | 1 1/4" | 0000000 | 00000 |
| 2" | Oversized | 1 1/2" | 0000000 | 00000 |
3/8" Wall Thick. | ||||
| 1 1/2" | Oversized | 3/4" | 0000000 | 00000 |
| 1 3/4" | Oversized | 1" | 0000000 | 00000 |
| 2" | Oversized | 1 1/4" | 0000000 | 00000 |
| 2 3/4" | Oversized | 2" | 0000000 | 00000 |
1/2" Wall Thick. | ||||
| 2" | Oversized | 1" | 0000000 | 00000 |
High-Temperature Graphite-Filled 841 Bearing Bronze Rods
- Yield Strength: 8,000 psi
- Hardness: Not Rated
- Temper: Not Rated
- Heat Treatable: No
- Specifications Met: ASTM B438
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F. Use it to make bearings and parts for hard-to-reach areas that would be difficult to access for lubrication, such as well pumps and turbine blades.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
| Dia. | Tolerance Rating | Lg. | Each | |
| 1/4" | Oversized | 2" | 000000 | 00000 |
| 3/8" | Oversized | 2" | 000000 | 0000 |
| 1/2" | Oversized | 4" | 000000 | 00000 |
| 5/8" | Oversized | 4" | 000000 | 00000 |
| 3/4" | Oversized | 4" | 000000 | 00000 |
| 7/8" | Oversized | 4" | 000000 | 00000 |
| 1" | Oversized | 4" | 000000 | 00000 |
| 1 1/8" | Oversized | 4" | 000000 | 00000 |
| 1 1/4" | Oversized | 4" | 000000 | 00000 |
| 1 1/2" | Oversized | 4" | 0000000 | 00000 |
| 1 3/4" | Oversized | 4" | 0000000 | 00000 |
| 2" | Oversized | 4" | 0000000 | 00000 |
Ultra-Wear-Resistant 420V Stainless Steel
- Yield Strength: Not Rated
- Hardness: Rockwell C30 (Hard)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C60
The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications. Maximum temperature for corrosion resistance is not rated.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.