Swing these long, heavy hammers with both hands to demolish material, form metal, and drive punches, chisels, and masonry drills. Mix faces of different materials or hardnesses to create the perfect striking tool.

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.

A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface.

Change the faces out when worn rather than replacing the entire tool. A fluorescent orange color makes these mallets easy to see. All have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

Strike metal, concrete, and stone with the flat end of these hammers; the wedge-shaped end is for bending and shaping metal. They're also known as cross-peen hammers.

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

Drive nails with the flat, steel face and remove them with the claw on the other end of the head.