Slippery Plastic Trim | McMaster-Carr

	Inside Width Inside Width

	Length Length

	Material Material

	Outside Width Outside Width

	Flexibility Flexibility

Very Flexible

Flexible

Rigid

	Color Color

	White		Gray
	Beige		Black

	Shape Shape


90° Angle	U Channel

	Profile Profile

	U
	Flat
	J
	Round
	Half Round
	C

	Outside Height Outside Height

	Wall Thickness Wall Thickness

	Mount Type Mount Type


Press Fit	Adhesive

Magnetic	Screw

	Inside Height Inside Height

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

	For Use Outdoors For Use Outdoors

Yes

	Hardness Rating Hardness Rating

	Hardness Hardness

	Performance Properties Performance Properties

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	For Use With For Use With

	Inside Corner Shape Inside Corner Shape

92 Products

About Durometer Hardness Scales

About Plastic

With a slippery surface, this trim minimizes friction between parts and is often used on conveyor rails, chutes, and guides. Made of plastic, it's also chemical resistant. All of this trim has a hard rating to withstand high levels of impact. It's also nonmarking.

Rigid trim does not bend and is for use on straights. Very flexible trim can be bent around tight corners.

Push-on trim fits onto an edge and it grips on three sides for a tight hold. Made of MDS-filled nylon, it’s also resistant to oils and has good abrasion and wear resistance.

Adhesive-back trim allows for easy installation. Made of UHMW and PEEK, it has good wear resistance.

For technical drawings and 3-D models, click on a part number.

Style 1—Push On

Inside		Outside
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
Short Lengths
MDS-Filled Nylon Plastic
1/16"	7/32"	11/64"	9/32"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	00000
1/8"	1/4"	1/4"	5/16"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	0000
17/64"	19/64"	27/64"	3/8"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	0000
												Each
100-ft. Lengths
MDS-Filled Nylon Plastic
1/16"	7/32"	11/64"	9/32"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000
1/8"	1/4"	1/4"	5/16"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000
17/64"	19/64"	27/64"	3/8"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000

Style 2—Push On

Inside		Outside
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
Short Lengths
MDS-Filled Nylon Plastic
3/16"	7/32"	5/16"	3/8"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	00000
												Each
100-ft. Lengths
MDS-Filled Nylon Plastic
3/16"	7/32"	5/16"	3/8"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000

Style 3—Push On

Inside		Outside
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
Short Lengths
MDS-Filled Nylon Plastic
7/64"	17/64"	15/64"	21/64"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	00000
1/8"	7/16"	1/4"	1/2"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	0000
13/64"	15/16"	21/64"	1"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	0000
1/4"	7/16"	23/64"	1/2"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	0000
												Each
100-ft. Lengths
MDS-Filled Nylon Plastic
7/64"	17/64"	15/64"	21/64"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000
1/8"	7/16"	1/4"	1/2"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000
13/64"	15/16"	21/64"	1"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000
1/4"	7/16"	23/64"	1/2"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000

Style 4—Push On

Inside		Outside
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	ID (G)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
Short Lengths
MDS-Filled Nylon Plastic
1/8"	15/32"	21/64"	41/64"	15/64"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	00000
													Each
100-ft. Lengths
MDS-Filled Nylon Plastic
1/8"	15/32"	21/64"	41/64"	15/64"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000

Style 5—Push On

Inside		Outside
Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Short Leg Outside Ht. (F)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
Short Lengths
MDS-Filled Nylon Plastic
3/16"	3/8"	5/16"	1"	7/16"	Rigid	Hard	-40° to 220°	No	Yes	Gray	10, 25, 50	0000000	00000
													Each
5/16"	3/8"	7/16"	1"	7/16"	Rigid	Hard	-40° to 220°	No	Yes	Gray	6	0000000	00000
100-ft. Lengths
MDS-Filled Nylon Plastic
3/16"	3/8"	5/16"	1"	7/16"	Rigid	Hard	-40° to 220°	No	Yes	Gray	100	00000000	000000

Style 6—Push On

Inside
Wd. (A)	Ht. (D)	Opening Wd. (E)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Length, ft.		Each
MDS-Filled Nylon Plastic
5/8"	29/64"	3/8"	Rigid	Hard	-40° to 220°	No	Yes	Gray	6	0000000	000000
3/4"	17/32"	3/8"	Rigid	Hard	-40° to 220°	No	Yes	Gray	6	0000000	00000

Style 7—Adhesive Back

Outside
Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Length, ft.		Each
PEEK Plastic
1"	0.007"	Very Flexible	Hard	-40° to 300°	No	Yes	Beige	9	0000000	000000
2"	0.007"	Very Flexible	Hard	-40° to 300°	No	Yes	Beige	1	0000000	00000
UHMW Plastic
1/2"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	15	0000000	0000
1"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	15	0000000	00000
2"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	15	0000000	00000
6"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	3	0000000	00000
12"	0.022"	Very Flexible	Hard	0° to 120°	No	Yes	Semi-Clear White	3	0000000	00000

Slippery High-Temperature Plastic Trim

This trim withstands temperatures up to 500° F, which is generally twice as high as our other slippery trim. Made of PTFE, it has a slippery surface to minimize friction between parts and is often used on conveyor rails, chutes, and guides. It's also chemical resistant. This trim has a hard or medium-hard rating to withstand high levels of impact. The harder the trim, the more impact it withstands. All of the trim is nonmarking.

Flexible trim can be bent along a gradual curve. Very flexible trim can be bent around tight corners.

Screw-in trim requires drilling mounting holes and securing it with fasteners. It can be used outdoors.

Push-on trim fits onto an edge and it grips on three sides for a tight hold. It can be used outdoors.

Adhesive-back trim allows for easy installation. It is not for use outdoors.

For technical drawings and 3-D models, click on a part number.

Style 1—Screw In

	Inside		Outside
	Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
PTFE Plastic
1	1"	39/64"	1 1/4"	47/64"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	000000
													Each
1	1"	39/64"	1 1/4"	47/64"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000

Style 2—Push On

	Inside		Outside
	Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
PTFE Plastic
2	1/8"	1/4"	9/32"	11/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	000000
													Each
2	1/8"	1/4"	9/32"	11/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	00000
													Per Ft.
2	1/4"	3/8"	1/2"	1/2"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	00000
													Each
2	1/4"	3/8"	1/2"	1/2"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000
													Per Ft.
2	3/8"	1/2"	3/4"	5/8"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	00000
													Each
2	3/8"	1/2"	3/4"	5/8"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000

Style 3—Push On

	Inside		Outside
	Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Short Leg Outside Ht. (F)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
PTFE Plastic
3	1/4"	35/64"	1/2"	1"	21/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	000000
														Each
3	1/4"	35/64"	1/2"	1"	21/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000

Style 4—Push On

	Inside		Outside
	Wd. (A)	Ht. (B)	Wd. (C)	Ht. (D)	Opening Wd. (E)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
PTFE Plastic
4	1"	1"	1 1/4"	1 1/4"	1/2"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	000000
														Each
4	1"	1"	1 1/4"	1 1/4"	1/2"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000

Style 5—Push On

		Outside
	Inside Wd. (A)	Wd. (C)	Ht. (D)	Opening Wd. (E)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
PTFE Plastic
5	1/2"	11/16"	25/64"	3/8"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	000000
													Each
5	1/2"	11/16"	25/64"	3/8"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000
													Per Ft.
5	5/8"	13/16"	15/32"	13/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	00000
													Each
5	5/8"	13/16"	15/32"	13/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000
													Per Ft.
5	3/4"	15/16"	5/8"	17/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	00000
													Each
5	3/4"	15/16"	5/8"	17/32"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	000000

Style 6—Push On

PTFE Plastic
	Inside Wd. (A)	Outside Wd. (C)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Available Lengths, ft.		Per Ft.
6	1/2"	11/16"	Flexible	Hard	-350° to 500°	Yes	Yes	White	2, 5	0000000	000000
											Each
6	1/2"	11/16"	Flexible	Hard	-350° to 500°	Yes	Yes	White	8	00000000	00000

Style 7—Adhesive Back

	Outside
	Wd. (C)	Ht. (D)	Flexibility	Hardness Rating	Temperature Range, °F	For Use Outdoors	Nonmarking	Color	Length, ft.		Each
PTFE Plastic
7	1/2"	0.005"	Very Flexible	Medium Hard	40° to 500°	No	Yes	Beige	15	0000000	000000
7	1"	0.005"	Very Flexible	Medium Hard	40° to 500°	No	Yes	Beige	15	0000000	00000
7	1 1/2"	0.005"	Very Flexible	Medium Hard	40° to 500°	No	Yes	Beige	15	0000000	00000
7	2"	0.005"	Very Flexible	Medium Hard	40° to 500°	No	Yes	Beige	15	0000000	00000

Food Industry Wear Plates

Suitable for food contact, these plates are made of FDA listed UHMW plastic, which has a slippery surface to minimize friction. Often found on conveyor systems, use these plates where friction between two parts or materials is wearing down equipment to extend equipment life. All of these plates have a hard rating to withstand high levels of impact. They're also nonmarking.

For technical drawings and 3-D models, click on a part number.

UHMW Plastic
Thick.	Lg.	Wd.	Nonmarking	For Use Outdoors	Hardness Rating	Hardness	Temperature Range, °F	Specifications Met	Color		Each
1/8"	12"	12"	Yes	No	Hard	Durometer 65D	-40° to 180°	FDA Compliant 21 CFR 177.1520	White	0000000	000000
1/4"	12"	12"	Yes	No	Hard	Durometer 65D	-40° to 180°	FDA Compliant 21 CFR 177.1520	White	0000000	00000
3/8"	12"	12"	Yes	No	Hard	Durometer 65D	-40° to 180°	FDA Compliant 21 CFR 177.1520	White	0000000	00000

Magnetic Wear Strips

Easily attach, move, and replace these magnetic wear strips on metal surfaces to minimize friction—simply press them on and peel them off as needed. Often found on conveyor systems and chutes, use these strips where friction between two parts or materials is wearing down equipment to extend equipment life. All of these strips have an extra-hard rating to withstand high levels of impact. They are flexible enough to bend around a curve. They're also nonmarking.

Silicone-filled UHMW strips are more slippery than the standard UHMW strips. Objects with adhesives and labels on them will not stick to them to prevent backups on conveyors and chutes.

For technical drawings and 3-D models, click on a part number.

UHMW Plastic
Wd.	Lg., ft.	Thick.	Flexibility	Hardness Rating	Hardness	Temperature Range, °F	For Use Outdoors	Nonmarking	Color		Each
1/2"	10	0.02"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	000000
3/4"	10	0.02"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
1"	10	0.02"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
2"	5	0.02"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
4"	3	0.02"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
6"	3	0.02"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
Silicone-Filled UHMW Plastic
3/4"	5	0.04"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
1"	5	0.04"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000
2"	5	0.04"	Flexible	Extra Hard	Durometer 95A	0° to 140°	No	Yes	Black	0000000	00000

Chemical-Resistant Slippery PTFE 90° Angles

Color: White
Temperature Range: -350° to 500° F
Tensile Strength: 2,170-2,800 psi (Poor)
Impact Strength: 3.5 ft.-lbs./in. (Good)
Hardness: Durometer 52D-55D (Medium Soft)
For Use Outdoors: Yes
Specifications Met: FDA Compliant 21 CFR 177.1550, SAE AMS3671, ASTM D1710, UL 94 V-0

Often used as guide rails and with parts that slide, these 90° angles have a slippery surface that prevents sticking. PTFE surpasses most plastic when it comes to chemical resistance and performance in extreme temperatures. It’s also an excellent electrical insulator and easy to machine.

For technical drawings and 3-D models, click on a part number.

		Outside			Inside
Wall Thick.	Wall Thick. Tolerance	Ht.	Ht. Tolerance	Wd.	Ht.	Wd.	Lengths, ft.		Per Ft.
1/16"	0.000" to 0.015"	1/2"	-0.05" to 0.05"	1/2"	7/16"	7/16"	1, 2, 3, 4, 5	0000000	000000
1/16"	Not Rated	3/4"	Not Rated	3/4"	11/16"	11/16"	1, 2, 3, 4, 5	0000000	00000
1/8"	0.000" to 0.015"	1"	-0.05" to 0.05"	1"	7/8"	7/8"	1, 2, 3, 4, 5	0000000	00000
1/8"	Not Rated	1 1/4"	Not Rated	1 1/4"	1 1/8"	1 1/8"	1, 2, 3, 4, 5	0000000	00000
1/4"	0.000" to 0.015"	1 1/2"	-0.05" to 0.05"	1 1/2"	1 1/4"	1 1/4"	1, 2, 3, 4, 5	0000000	00000
1/4"	Not Rated	1 3/4"	Not Rated	1 3/4"	1 1/2"	1 1/2"	1, 2, 3, 4, 5	0000000	00000
1/4"	0.000" to 0.015"	2"	-0.05" to 0.05"	2"	1 3/4"	1 3/4"	1, 2, 3, 4, 5	0000000	00000

Chemical-Resistant Slippery PTFE U-Channels

Color: White
Temperature Range: -350° to 500° F
Tensile Strength: 2,170-2,800 psi (Poor)
Impact Strength: 3.5 ft.-lbs./in. (Good)
Hardness: Durometer 52D-55D (Medium Soft)
For Use Outdoors: Yes
Specifications Met: FDA Compliant 21 CFR 177.1550, SAE AMS3671, ASTM D1710, UL 94 V-0

With a naturally slippery surface, these PTFE U-channels are useful in fabrications that require sliding action, such as frames for panel doors. They surpass most plastics when it comes to chemical resistance and performance in extreme temperatures. They’re also excellent electrical insulators and easy to machine.

For technical drawings and 3-D models, click on a part number.

		Outside				Inside
Wall Thick.	Wall Thick. Tolerance	Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Lengths, ft.		Per Ft.
1/16"	-0.015" to 0.015"	19/32"	-0.050" to 0.050"	1/2"	-0.050" to 0.050"	1/2"	3/8"	1, 2, 3, 4, 5	0000000	000000
9/64"	-0.015" to 0.015"	25/32"	-0.050" to 0.050"	1 7/8"	-0.050" to 0.050"	0.641"	1.594"	1, 2, 3, 4, 5	0000000	00000
3/16"	-0.015" to 0"	2 1/4"	-0.050" to 0.050"	2 1/2"	-0.050" to 0.050"	2 1/16"	2 1/8"	1, 2, 3, 4, 5	0000000	000000

Slippery UHMW Polyethylene U-Channels

Color: White
Temperature Range: -20° F to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4020, ASTM D4976, ASTM D6712, FDA Compliant 21 CFR 177.1520

Fabricate frames and parts for use in areas where scuffs, scrapes, and strikes are a factor. These UHMW U-channels have a slippery surface and excellent abrasion, wear, and impact resistance.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Lengths, ft.		Per Ft.
1/8" Wall Thick.
3/4"	-0.030" to 0.030"	1 1/4"	-0.030" to 0.030"	5/8"	1"	2, 5, 8	0000000	00000
1/4" Wall Thick.
3/4"	-0.030" to 0.030"	1"	-0.030" to 0.030"	3/8"	1/2"	2, 5, 8	0000000	0000
7/8"	-0.030" to 0.030"	1 1/2"	-0.030" to 0.030"	1/2"	1"	2, 5, 8	0000000	0000
1"	-0.080" to 0.080"	2"	-0.030" to 0.030"	5/8"	1 1/2"	2, 5, 8	0000000	0000
1"	-0.030" to 0.030"	2 1/2"	-0.030" to 0.030"	5/8"	2"	2, 5, 8	0000000	0000
1"	-0.030" to 0.030"	3"	-0.053" to 0.053"	5/8"	2 1/2"	2, 5, 8	0000000	00000
3/8" Wall Thick.
1"	-0.020" to 0.020"	3"	-0.030" to 0.030"	5/8"	2 1/4"	2, 5, 8	0000000	00000
1 1/4"	-0.030" to 0.030"	4 1/4"	-0.050" to 0.050"	7/8"	3 1/2"	2, 5, 8	0000000	00000

Slippery UHMW Polyethylene 90° Angles

Color: White
Temperature Range: -20° F to 180° F
Tensile Strength: 4,350-5,800 psi (Poor)
Impact Strength: 16.8 ft.-lbs./in. (Excellent)
Hardness: Durometer 65D-67D (Medium)
For Use Outdoors: No
Specifications Met: ASTM D4020, FDA Compliant 21 CFR 177.1520

Often used to fabricate frames and protect corners from impact, these UHMW 90° angles have a slippery surface that stands up to scuffs, scrapes, and strikes.

For technical drawings and 3-D models, click on a part number.

Outside				Inside
Ht.	Ht. Tolerance	Wd.	Wd. Tolerance	Ht.	Wd.	Lengths, ft.		Per Ft.
1/8" Wall Thick. (-0.060" to 0.060")
1"	-0.060" to 0.060"	1"	-0.060" to 0.060"	7/8"	7/8"	2, 5, 8, 10	0000000	00000
1 1/2"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	1 3/8"	1 3/8"	2, 5, 8, 10	0000000	0000
2"	-0.060" to 0.060"	2"	-0.060" to 0.060"	1 7/8"	1 7/8"	2, 5, 8, 10	0000000	0000
1/4" Wall Thick. (-0.060" to 0.060")
5/8"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	3/8"	1 1/4"	2, 5, 8, 10	0000000	0000
1 1/2"	-0.060" to 0.060"	1 1/2"	-0.060" to 0.060"	1 1/4"	1 1/4"	2, 5, 8, 10	0000000	0000
2"	-0.060" to 0.060"	2"	-0.060" to 0.060"	1 3/4"	1 3/4"	2, 5, 8, 10	0000000	0000
1/2" Wall Thick. (-0.060" to 0.060")
3"	-0.060" to 0.060"	3"	-0.060" to 0.060"	2 1/2"	2 1/2"	2, 5, 8, 10	0000000	00000
3 1/2"	-0.060" to 0.060"	3 1/2"	-0.060" to 0.060"	3"	3"	2, 5, 8, 10	0000000	00000