Place a cotter pin through the hole in the shank to keep a nut from loosening. These screws have a stronger hold than screws with thread lockers or lock washers.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water.

Made from nylon, these screws are chemical and oil resistant, nonconductive, and lightweight.

Good for use outdoors and in washdown environments, these metric 18-8 stainless steel screws are more corrosion resistant than steel and nearly as strong. Their pan-shaped head sits nearly flat on the fastened surface, so there’s no need to countersink a hole.

More corrosion resistant than 18-8 stainless steel screws, these pan head screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

Made from nylon, these metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These metric PTFE screws withstand harsh chemicals and temperatures from -100° F to 500° F. They are nonconductive, lightweight, and resist wear due to their slippery surface.

These pan head screws are zinc plated for corrosion resistance in wet environments.

Made from brass, these metric pan head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

These screws have good chemical resistance.

A zinc plating provides mild corrosion resistance.

Nylon screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Fit these metric screws into spaces where head height is important and other wide head screws won't fit. Also known as shutter screws, they have an ultra-wide truss head to distribute the load over a large area for excellent holding pressure.

Stainless steel screws have excellent corrosion resistance in most environments.

More corrosion resistant than 18-8 stainless steel screws, these screws have excellent resistance to chemicals and salt water.

Made from nylon, these screws are chemical and oil resistant, nonconductive, and lightweight.

Stainless steel screws have excellent corrosion resistance in most environments.

A zinc plating provides mild corrosion resistance.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these metric screws have excellent resistance to chemicals and salt water. They may be mildly magnetic.

These metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These metric polycarbonate screws resist breaking in high-impact applications better than other plastic screws. All are chemical and oil resistant, nonconductive, and lightweight.

These screws are more reliable in high-stress, high-temperature environments than other plastic screws. They withstand water, steam, and temperatures up to 500° F.

Angled under the head, these metric screws fit in countersunk holes and sit flush with the surface of your part.

These metric brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Brass screws are electrically conductive, nonmagnetic, and have good corrosion resistance.

Without a head to get in the way, these screws fit in tight spaces where standard shoulder screws cannot. Either thread them in a countersunk hole for a flush mount, or install them with the shoulder sticking out to use them as pins or dowels for aligning and locating components.

These slotted screws have a head height about one-third the head height of a standard shoulder screw. Use them in low-clearance applications such as inside machines.

These set screws have good chemical resistance.

Made from nylon, these set screws are lightweight, resist chemicals, and won’t carry an electric current.

Secure objects to flat surfaces in washdown and corrosive environments.

The green color identifies these as grounding screws. They have a flange that provides a wide flat surface for making solid electrical connections.

Also known as Swageform screws, threads at the tip are designed to grab material for a fast start with low torque in a wide range of materials.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are zinc plated to resist corrosion in wet environments.

Made from 18-8 stainless steel, these screws are chemical resistant.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These screws have a hex head for a secure grip with a wrench.

Serrations under the head act as a brake to prevent over-tightening and damaging threads.

Brass screws are corrosion resistant in wet environments and electrically conductive.

Brass screws are corrosion resistant in wet environments and electrically conductive.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

These slotted thumb screws are slim to fit in tight spaces.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 18-8 stainless steel, they are chemical resistant.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Pair with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Designed with a shoulder for the strength to handle side and shear loads.

Stainless steel binding barrels and screws have excellent corrosion resistance in most environments.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

Install these rounded head screws through a hole and thread on a retainer to keep secure—no special tools are required.

These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.

Press these rounded head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.

Bolts are beveled under the head for use in countersunk holes.

High-strength toggle anchors provide an extremely strong hold and stay in position when a bolt is removed.

Slotted on both ends for installation with a screwdriver.