McMaster-Carr

Search Results

	Discharge Pipe Size Discharge Pipe Size

1 1/4

1 1/2

	Voltage Voltage

	For Use With For Use With

Water with Solids

Sewage Water

Water

	Pump Activation Type Pump Activation Type

Float Switch

Plug In

	Maximum Flow Rate Maximum Flow Rate

	Maximum Feet of Head Maximum Feet of Head

	Power Source Power Source

Electric

Gasoline

	Pump Type Pump Type

	Power Power

	Housing Material Housing Material

	Electrical Connection Type Electrical Connection Type

Plug

Hardwire

	Maximum Solids Diameter Maximum Solids Diameter

	Duty Cycle Duty Cycle

Continuous

Intermittent

	Cord Length Cord Length

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

35° F

40° F

Not Rated

	Phase Phase

Single

Three

	Discharge Gender Discharge Gender

Female

Male

	Minimum Sump Pit Diameter Minimum Sump Pit Diameter

	Intake Connection Type Intake Connection Type

Inlet

Pipe

	Current Current

	Overall Length Overall Length

	Minimum Sump Pit Depth Minimum Sump Pit Depth

View catalog pages (5)

Forward

How can we improve?

58 Products

About Sump, Water-Removal, Condensate, and Submersible Pumps

Equipped with a large intake and a rugged impeller, this pump transfers raw sewage water with solids up to 2" in diameter. It has a cast iron housing that stands up to demanding environments. The float switch is wired to the pump. Submerge while in use and do not run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
120	100	80	25	2"	14"	9"	35° to 140°	1/2 hp	11	Open	2	NPT	Female	18"	24"	15"	11"	9"	00000000	0000000

Sump Pumps for Sewage Water
with Replaceable Float Switch

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Equipped with a large intake and rugged impeller, these pumps transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
100	80	60	20	2"	19"	11"	35° to 140°	2/5 hp	8	Open	2	NPT	Female	18"	24"	14"	10"	9"	00000000	0000000
120	100	80	25	2"	19"	11"	35° to 140°	1/2 hp	11	Open	2	NPT	Female	18"	24"	14"	10"	9"	00000000	000000

Sump Pumps without Float Switch for Sewage Water

Pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Equipped with a large intake and rugged impeller, these pumps transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Pump with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Max. Flow Rate, gpm									Discharge				Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Wire Connection Type	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
100	80	60	20	2"	35° to 140°	2/5 hp	8	Open	2	NPT	Female	__	18"	24"	14"	10"	9"	00000000	0000000
120	100	80	25	2"	35° to 140°	1/2 hp	11	Open	2	NPT	Female	__	18"	24"	14"	10"	9"	00000000	000000
208/240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 20 ft. Cord
120	95	70	25	2"	35° to 140°	1/2 hp	5A/4.5A	Open	2	NPT	Female	Wire Leads	18"	24"	12"	11"	7"	00000000	000000

Energy-Efficient Sump Pumps for Sewage Water

These pumps have a heavy duty motor with sealed bearings that generates a flow rate similar to our other sump pumps for sewage water while using fewer amps. Use them to transfer raw sewage water with solids up to 2" in diameter. The float switch is wired to the pump. Submerge while in use and do not run dry.

Pump with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Max. Flow Rate, gpm						Level					Discharge			Min. Sump Pit		O'all
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Feet of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 25 ft. Cord
100	77	52	15	21	2"	32"	12"	35° to 100°	1/2 hp	5.3	2	NPT	Female	24"	31 7/8"	22"	9"	8"	00000000	000000000
130	107	82	58	26	2"	32"	12"	35° to 100°	1 hp	8.8	2	NPT	Female	24"	33 1/16"	23"	9"	8"	00000000	00000000
240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 25 ft. Cord and Wire Leads
139	124	106	100	33	2"	29"	15"	35° to 100°	1 1/2 hp	6.4	2	NPT	Female	24"	28 1/8"	21"	9"	8"	00000000	00000000

Energy-Efficient Sump Pumps without
Float Switch for Sewage Water

Pumps have a heavy duty motor with sealed bearings that generates a flow rate similar to our other sump pumps for sewage water while using fewer amps. Connect them to a three-pronged plug or wire them directly to a power source to activate. You can also add a plug-in switch to control when the pump activates. Pumps transfer raw sewage water with solids up to 2” in diameter. Submerge while in use and do not run dry.

Max. Flow Rate, gpm										Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
240V AC, Three Phase—With Thermal Overload Protection
Hardwire with 25 ft. Cord
__	175	159	145	46	2"	35° to 100°	2 hp	6.1	Open	2	NPT	Female	24"	24"	21"	9"	8"	00000000	000000000
130	107	82	58	26	2"	35° to 100°	1 hp	3.1	Open	2	NPT	Female	24"	24"	20"	9"	8"	00000000	00000000

High-Flow Sump Pumps without
Float Switch for Sewage Water

These pumps provide over 50% more flow than standard plug-in activated pumps for sewage water. They activate when plugged in. You can add a plug-in switch to control when the pump activates. Pumps are equipped with a large intake and rugged impeller to transfer raw sewage water with solids up to 2" in diameter. All have a cast iron housing that stands up to demanding environments. Pumps can run dry.

Pumps with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Max. Flow Rate, gpm									Discharge				Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Wire Connection Type	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 15 ft. Cord
160	130	100	25	2"	35° to 100°	1/2 hp	11.6	Open	2	NPT	Female	__	24"	30"	19"	10"	13"	0000000	0000000
200/240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 30 ft. Cord
220	190	160	36	2"	35° to 100°	1 hp	8.8A/8.3A	Open	3	NPT	Female	Wire Leads	24"	30"	19"	10"	14"	0000000	00000000
240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 20 ft. Cord
410	370	312	46	2"	35° to 100°	2 hp	19	Open	3	NPT	Female	Wire Leads	24"	30"	22"	13"	17"	0000000	00000000

High-Flow Float-Switch Activated
Sump Pumps for Sewage Water

These pumps provide about 25% more flow than standard float-switch activated pumps for sewage water. Equipped with a large intake and rugged impeller, they transfer raw sewage water with solids up to 2" in diameter. All have a cast iron housing that stands up to demanding environments. The float switch is wired to the pump. Pumps can run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 15 ft. Cord
160	130	100	25	2"	20"	13"	35° to 100°	1/2 hp	11.6	Open	2	NPT	Female	24"	30"	19"	10"	13"	0000000	0000000
240V AC, Single Phase—With Thermal Overload Protection
Plug with 15 ft. Cord
160	130	100	25	2"	20"	13"	35° to 100°	1/2 hp	5.9	Open	2	NPT	Female	24"	30"	19"	10"	13"	0000000	000000

High-Flow Sump Pumps for Sewage
Water with Replaceable Float Switch

These pumps provide about 25% more flow than standard float-switch activated pumps for sewage water. The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Pumps are equipped with a large intake and rugged impeller to transfer raw sewage water with solids up to 2" in diameter. They have a cast iron housing that stands up to demanding environments. Pumps can run dry.

Max. Flow Rate, gpm					Level						Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 15 ft. Cord
120	96	65	26	2"	13"	6"	35° to 75°	2/5 hp	12	Open	2	NPT	Female	24"	30"	17"	8"	11"	0000000	0000000
Plug with 20 ft. Cord
160	130	100	25	2"	13"	6"	35° to 100°	1/2 hp	11.6	Open	2	NPT	Female	24"	30"	19"	10"	13"	0000000	000000

Clog-Resistant Sump Pumps for Sewage
Water with Replaceable Float Switch

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as grinder pumps, they have stainless steel blades that prevent clogs by breaking down sewage into an easy-to-transfer slurry. Do not use with metal particles or debris that could damage blades. Pumps have a cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Pump with wire leads can be connected to a three-pronged plug or wired directly to a power source.

120V AC, Single Phase—With Thermal Overload Protection

Max. Flow Rate, gpm								Level					Discharge			Min. Sump Pit		O'all
@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	@ 40 Ft. of Head	@ 50 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Dia.	Ht.		Each
Plug with 20 ft. Cord
42	39	37	31	20	6	55	3"	20"	12"	35° to 100°	1 hp	13	1 1/4	NPT	Female	18"	30"	12"	20"	0000000	000000000
42	39	37	31	20	6	55	3"	20"	12"	35° to 100°	1 hp	13	2	NPT	Female	18"	30"	12"	20"	0000000	00000000

208/240V AC, Single Phase—With Thermal Overload Protection

Max. Flow Rate, gpm					Level					Discharge				Min. Sump Pit		O'all
@ 20 Ft. of Head	@ 60 Ft. of Head	@ 100 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Wire Connection Type	Dia.	Dp.	Ht.	Wd.	Lg.		Each
Hardwire with 20 ft. Cord
32	30	20	130	2"	24"	10"	35° to 140°	2 hp	13.9	1 1/4	NPT	Female	Wire Leads	24"	48"	22"	12"	10"	0000000	000000000

240V AC, Single Phase—With Thermal Overload Protection

Max. Flow Rate, gpm								Level					Discharge			Min. Sump Pit		O'all
@ 10 Ft. of Head	@ 60 Ft. of Head	@ 70 Ft. of Head	@ 80 Ft. of Head	@ 90 Ft. of Head	@ 100 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Dia.	Ht.		Each
Plug with 20 ft. Cord
44	43	40	35	20	5	133	3"	22"	14"	35° to 100°	2 hp	15	2	NPT	Female	18"	30"	12"	22"	0000000	000000000

Float-Switch Activated Clog-Resistant
Sump Pumps for Sewage Water

Also known as a grinder pump, this pump has stainless steel blades that prevent clogs by breaking down sewage into an easy-to-transfer slurry. Do not use with metal particles or debris that could damage blades. Pump has an epoxy-coated cast iron housing that stands up to demanding environments. The float switch is wired to the pump. Submerge while in use and do not run dry.

Max. Flow Rate, gpm				Level					Intake			Discharge			Min. Sump Pit		O'all
@ 20 Ft. of Head	@ 60 Ft. of Head	@ 100 Ft. of Head	Max. Ft. of Head, ft.	Turn On	Turn Off	Temp. Range Max., °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
240V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
46	43	7	107	24"	6"	130°	2 hp	13.7	1 1/4	NPT	Female	1 1/4	NPT	Female	24"	48"	19"	12"	8"	0000000	000000000

Sump Pumps with Basin for Sewage Water

Convenient for applications where a sump pit is impractical, these pumps include a basin with a vent on top. They handle raw sewage water with solids up to 2" in diameter. The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump.

Max. Flow Rate, gpm					Level							Discharge			O'all
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	Max. Feet of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Cap., gal.	Temp. Range, °F	Horsepower	Current, A	Intake Inlet Connection Type	Pipe Size	Thread Type	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
125	100	65	20	2"	11 1/2"	4 1/2"	41	35° to 100°	2/5 hp	12	Open	2	NPT	Female	24"	29"	25"	0000000	0000000

High-Flow Sump Pumps without
Switch for Water with Small Solids

Use these pumps to move higher volumes of water with solids than other sump pumps. They activate when plugged in; add a plug-in switch to control when the pump activates. Also known as effluent pumps, they accommodate solids up to 3/4" in diameter. They are often used with liquid waste that has passed through a septic tank, so most solids are removed. Pumps have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Pumps with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Max. Flow Rate, gpm											Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	@ 40 Ft. of Head	@ 50 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
__	__	60	40	20	__	50	3/4"	35° to 140°	1/2 hp	12.5	2	NPT	Female	18"	24"	17"	15"	10"	00000000	0000000
70	65	50	26	__	__	40	3/4"	35° to 140°	2/5 hp	7.5	1 1/2	NPT	Female	18"	24"	11"	9"	8"	00000000	000000
240V AC, Single Phase—With Thermal Overload Protection
Hardwire with 20 ft. Cord and Wire Leads
__	__	__	90	70	52	81	3/4"	35° to 140°	1 hp	10.2	2	NPT	Female	24"	30"	17"	15"	10"	00000000	000000
__	__	135	125	110	98	110	3/4"	35° to 140°	2 hp	16.4	2	NPT	Female	30"	30"	18"	13"	9"	00000000	00000000

Sump Pumps without Float Switch
for Water with Small Solids

These pumps activate when plugged in. You can add a plug-in switch to control when the pump activates. Also known as effluent pumps, these accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. They have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm											Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	@ 40 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single—With Thermal Overload Protection
Plug with 20 ft. Cord
53	50	42	34	__	__	28	1/2"	35° to 140°	1/3 hp	5	1 1/2	NPT	Female	18"	24"	11"	9"	9"	00000000	0000000
60	55	__	45	30	15	60	3/4"	35° to 140°	1/2 hp	9	1 1/2	NPT	Female	18"	24"	11"	9"	8"	00000000	000000

Sump Pumps for Water with Small
Solids with Replaceable Float Switch

The float switch has a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as effluent pumps, these accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. All have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm							Level					Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	@ 40 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 20 ft. Cord
60	55	45	30	15	60	3/4"	16"	10"	35° to 140°	1/2 hp	9	1 1/2	NPT	Female	18"	24"	11"	9"	8"	00000000	0000000
70	65	50	26	__	40	3/4"	12"	6"	35° to 140°	2/5 hp	7.5	1 1/2	NPT	Female	18"	24"	11"	9"	8"	00000000	000000

Float-Switch Activated Sump
Pumps for Water with Small Solids

Also known as effluent pumps, these accommodate solids up to 3/4” in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. The float switch is wired to the pump. All have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Max. Flow Rate, gpm								Level					Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	@ 40 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
53	50	42	34	__	__	28	1/2"	11"	5"	35° to 140°	1/3 hp	5	1 1/2	NPT	Female	18"	24"	12"	11"	9"	00000000	0000000
Plug with 20 ft. Cord
60	55	__	45	30	15	60	3/4"	11"	6"	35° to 140°	1/2 hp	9	1 1/2	NPT	Female	18"	24"	11"	11"	8"	00000000	000000

High-Temperature Float-Switch Activated
Sump Pumps for Water with Small Solids

Use these pumps at temperatures up to 200° F. Also known as effluent pumps, they accommodate solids up to 3/4" in diameter. They’re often used with liquid waste that has passed through a septic tank, so most solids are removed. The float switch is adjustable and wired to the discharge pipe. Pumps have an epoxy-coated cast iron housing that stands up to demanding environments. Submerge while in use and do not run dry.

Replacement float switches (sold separately) include a float, connecting wires, and a seal.

Max. Flow Rate, gpm						Level					Discharge			Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 15 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn-On	Turn-Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Thread Type	Gender	Dia.	Dp.	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 15 ft. Cord
50	42	27	__	20	1/2"	14"	4"	35° to 200°	1/3 hp	10.1	1 1/2	NPT	Female	18"	24"	11"	9"	9"	00000000	0000000
90	75	53	30	26	5/8"	__	__	Not Rated	1/2 hp	10.7	1 1/2	NPT	Female	18"	30"	13"	12 1/4"	9 5/8"	00000000	000000

Replacement Float Switch for Pump with 1/3 Horsepower	00000000	Each	0000000
Replacement Float Switch for Pump with 1/2 Horsepower	00000000	Each	00000

Sump Pumps with Basin for Water with Small Solids

Convenient for applications where a sump pit is impractical, this pump includes a basin with a vent on top. It has a float switch with a separate cord that can unplug, so you can replace the switch without replacing the whole pump. Also known as an effluent pump, it accommodates solids up to 3/4" in diameter. It is often used with liquid waste that has passed through a septic tank, so most solids are removed.

Sump Pumps

Sump Pump

Max. Flow Rate						Level						Intake (NPT)		Discharge (NPT)		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	@ 30 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Turn On	Turn Off	Capacity, gal.	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Gender	Pipe Size	Gender	Ht.	Wd.	Lg.		Each
120V AC, Single Phase—With Thermal Overload Protection
Plug with 10 ft. Cord
70	65	50	26	40	3/4"	10"	5"	5	35° to 125°	2/5 hp	7.5	1 1/2	Female	1 1/2	Female	16"	15"	15"	0000000	0000000

Replacement Parts

Replacement Basin

Replacement Basin Cover

Replacement Coupling Pipe

Replacement Discharge Pipe

Replacement Float Switch

Replacement Opening O-Ring

Replacement Seal Ring

Component		Each
Basin	00000000	000000
Basin Cover	00000000	00000
Coupling Pipe	00000000	00000
Discharge Pipe	00000000	000000
Float Switch	00000000	00000
Opening O-Ring	00000000	0000
Seal Ring	00000000	00000

Pressure Switches for Sump Pumps

Since these switches activate on increasing pressure caused by rising water levels, they have no floats to catch on sump pit walls. Use them to replace an existing switch, or pair them with a plug-in activated pump to control when the pump activates.

Switch with wire leads can be connected to a three-pronged plug or wired directly to a power source.

Voltage	Current, A	Temperature Range, °F	Wire Connection Type	Plug Type	Cord Lg., ft.		Each
120V AC	10	35° to 120°	__	Three Prong	18	0000000	0000000
240V AC	10	35° to 120°	Wire Leads	__	8	0000000	00000

Mobile Gasoline-Powered Sewage Water-Removal Pumps

Wheel these pumps to remote areas with no power. They can handle sewage water with thick sludge, silt, and debris up to 2" in diameter. Pumps are self-priming, which means they create a suction force to draw liquid upward and fill the pump chamber. Mount up to 20 feet above your liquid source. All have a pull-start engine. They are not submersible.

Pump with a tank capacity of 1.6 gallons includes an electric starter that operates on a 12-volt battery (sold separately).

Note: Pumps must be filled with liquid before use. They need a constant flow of liquid and cannot run dry.

Max. Flow Rate, gpm										Intake (NPT)		Discharge (NPT)		Overall
@ 10 Ft. of Head	@ 30 Ft. of Head	@ 60 Ft. of Head	@ 90 Ft. of Head	@ 100 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To, ft.	Temp. Range, °F	Horsepower	Pipe Size	Gender	Pipe Size	Gender	Ht.	Wd.	Lg.		Each
1.6 gal. Tank Capacity
__	530	335	110	20	103	2"	20	40° to 180°	13 hp	4	Female	4	Female	31"	38"	45"	00000000	000000000
1.7 gal. Tank Capacity
530	475	350	180	115	118	2"	20	40° to 180°	13 hp	4	Female	4	Female	37"	38"	45"	00000000	00000000

Portable Sewage Water-Removal Pumps

Male Discharge

Female Discharge

Transfer raw sewage water that contains solids up to 2” in diameter. These pumps have a float switch with a separate cord that can unplug, so you can replace the switch without replacing the whole pump. The length of the float switch cord is adjustable. Turn-on and turn-off levels will vary according to the length of the cord. Pumps are gravity fed and require an elevated liquid source to fully fill the pump before turning on. Do not run dry.

Pumps with male discharge port have a horizontal discharge.

Pumps with female discharge port have a vertical discharge.

Max. Flow Rate, gpm						Level					Discharge (NPT)		Min. Sump Pit		Overall
@ 5 Ft. of Head	@ 10 Ft. of Head	@ 20 Ft. of Head	Max. Ft. of Head, ft.	Max. Solids Dia.	Removes Water Down To	Turn On	Turn Off	Temp. Range, °F	Horsepower	Current, A	Pipe Size	Gender	Dia.	Dp.	Dia.	Ht.	Wd.		Each
240V AC, Single Phase
Hardwire with 25 ft. Cord
__	80	44	35	2"	5 1/2"	20"-22"	4"-12"	35° to 100°	1 hp	6.4	2	Male	22"	24"	__	19"	10"	0000000	0000000
__	114	79	46	2"	5 1/2"	20"-22"	4"-12"	35° to 100°	1 1/2 hp	8.4	2	Male	22"	24"	__	19"	10"	0000000	00000000
100	78	41	33	2"	5 1/2"	20"-22"	4"-12"	35° to 130°	1 hp	6.3	2	Female	22"	24"	10"	18"	__	0000000	00000000
134	114	77	41	2"	5 1/2"	20"-22"	4"-12"	35° to 130°	1 1/2 hp	8.4	2	Female	22"	24"	10"	18"	__	0000000	00000000

Hose Kits for Gasoline-Powered Water-Removal Pumps

Kits include 20 feet of PVC suction hose, 50 feet of PVC discharge hose, a suction strainer, and two steel thread adapters.

Includes		Each
20 ft. of PVC Suction Hose (1 1/2 NPS Male × 1 1/2 NPS Female), 50 ft. of PVC Discharge Hose (1 1/2 NPS Male × 1 1/2 NPS Female), Suction Strainer, Two Steel Adapters (1 1/2 NPS Male × 1 1/2 NPT Male)	0000000	0000000
20 ft. of PVC Suction Hose (2 NPS Male × 2 NPS Female), 50 ft. of PVC Discharge Hose (2 NPS Male × 2 NPS Female), Suction Strainer, Two Steel Adapters (2 NPS Male × 2 NPT Male)	0000000	000000
20 ft. of PVC Suction Hose (3 NPS Male × 3 NPS Female), 50 ft. of PVC Discharge Hose (3 NPS Male × 3 NPS Female), Suction Strainer, Two Steel Adapters (3 NPS Male × 3 NPT Male)	0000000	000000
20 ft. of PVC Suction Hose (4 NPS Male × 4 NPS Female), 50 ft. of PVC Discharge Hose (4 NPS Male × 4 NPS Female), Suction Strainer, Two Steel Adapters (4 NPS Male × 4 NPT Male)	0000000	000000

Terms and Conditions and Privacy Policy

About Sump, Water-Removal, Condensate, and Submersible Pumps

Float-Switch Activated Sump Pumps for Sewage Water

Sump Pumps for Sewage Waterwith Replaceable Float Switch

Sump Pumps without Float Switch for Sewage Water

Energy-Efficient Sump Pumps for Sewage Water

Energy-Efficient Sump Pumps withoutFloat Switch for Sewage Water

High-Flow Sump Pumps withoutFloat Switch for Sewage Water

High-Flow Float-Switch ActivatedSump Pumps for Sewage Water

High-Flow Sump Pumps for SewageWater with Replaceable Float Switch

Clog-Resistant Sump Pumps for SewageWater with Replaceable Float Switch

Float-Switch Activated Clog-ResistantSump Pumps for Sewage Water

Sump Pumps with Basin for Sewage Water

High-Flow Sump Pumps withoutSwitch for Water with Small Solids

Sump Pumps without Float Switchfor Water with Small Solids

Sump Pumps for Water with SmallSolids with Replaceable Float Switch

Float-Switch Activated SumpPumps for Water with Small Solids

High-Temperature Float-Switch ActivatedSump Pumps for Water with Small Solids

Sump Pumps with Basin for Water with Small Solids

Pressure Switches for Sump Pumps

Mobile Gasoline-Powered Sewage Water-Removal Pumps

Portable Sewage Water-Removal Pumps

Hose Kits for Gasoline-Powered Water-Removal Pumps

Sump Pumps for Sewage Water
with Replaceable Float Switch

Energy-Efficient Sump Pumps without
Float Switch for Sewage Water

High-Flow Sump Pumps without
Float Switch for Sewage Water

High-Flow Float-Switch Activated
Sump Pumps for Sewage Water

High-Flow Sump Pumps for Sewage
Water with Replaceable Float Switch

Clog-Resistant Sump Pumps for Sewage
Water with Replaceable Float Switch

Float-Switch Activated Clog-Resistant
Sump Pumps for Sewage Water

High-Flow Sump Pumps without
Switch for Water with Small Solids

Sump Pumps without Float Switch
for Water with Small Solids

Sump Pumps for Water with Small
Solids with Replaceable Float Switch

Float-Switch Activated Sump
Pumps for Water with Small Solids

High-Temperature Float-Switch Activated
Sump Pumps for Water with Small Solids