Thin wire jaws grasp small or oddly shaped objects.

An LED lights the wire jaws and the shaft bends to reach objects in awkward spaces.

Pick up screws, nuts, and other small steel objects.

An extra-long shaft enables access to material in hard-to-reach areas. These retrievers can pick up heavier objects than our other magnetic retrievers.

LEDs light the magnetized tip for picking up screws, nuts, and other small steel objects in dark areas.

Push the plunger to engage the magnet; release to disengage. These retrievers bend into position and stay in place.

Protect against accidental contact with live electrical circuits. These insulated retrievers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The shaft bends and stays in position to reach objects in awkward spaces.

The head pivots, so you can pick up screws, nuts, bolts, and other small steel objects from any angle.

Sets include an assortment of general purpose tweezers for gripping a variety of objects.

These assorted tweezers hold small parts without the need to apply pressure. Squeeze to open the tips and release to close them.

Sets include assorted tweezers with each style a different color for easy identification.

Lock the tips closed to use these tweezers like a clamp.

An LED lights the tips for picking up and positioning in dark areas.

Choose plastic tweezers for a soft, nonmarring grip. These tools are corrosion resistant and nonmagnetic.

A PTFE coating on the tips prevents material from sticking to these tweezers.

Protect against accidental contact with live electrical circuits. These plastic-insulated tweezers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Sets include an assortment of premium tweezers that are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Prevent buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The cushioned grips drain static from your application. These premium tweezers are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Toothed tips get a firm hold on thin and flexible material that is difficult to grip with standard tweezers, such as soft fabric and mesh.

Designed for placing chips and electronic components on circuit boards, these tweezers have rectangular-shaped tips that are angled to reach over and around obstructions. They are also known as SMD (surface-mount device) tweezers.

These assorted tweezers have tips that can be replaced when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components.

Extend the life of these tweezers by replacing the tips when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components.

A heavy duty steel construction and long handle allow you to grip hot material in furnaces and forging and heat-treating applications.

Also known as hemostats, these tongs enable intricate work in tight spaces and the jaws can be locked closed. The handle has interlocking teeth that allow you to adjust the clamping pressure.

Get a firm grip on beakers and other containers in the curved jaws. You can also use the tips of these tongs to pick up small objects.

The assorted picks in these sets are used to install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

A different tip at each end allows you to install, extract, and position parts with one tool.

Use these tools to hold, separate, and position wire, springs, and other small parts.

An insulated handle protects against accidental contact with live electrical circuits. These picks are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

These assorted picks have insulated handles that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Replace tips when they become worn or to use a different style. The corkscrew tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling.

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to extract material from tight spots.

Pull material out of tight spots. Similar to removing a cork from a bottle, the tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling.

The assorted needle-sharp picks in these sets are similar to dental instruments and suitable for work around delicate circuits and components.

Also known as packing irons, the offset handle allows you to install packing into hard-to-reach areas while the blunt tip prevents accidentally cutting or damaging the packing material.

Able to rotate 360° and flex to 45°, these fittings help vacuum cups grip items that are positioned at an angle.

Stick these adapters onto Non-Contact Vacuum Lifters to create a soft area for your workpiece to touch while it’s in motion.

With robot tool mounts and connectors, these vacuum lifters come ready to attach to robot arms with standard ISO mounting hole patterns.

With multiple suction ports, these lifters can grip, lift, and move large items with a variety of surfaces.

These large-surface lifters come with software, robot tool mounts, and connectors for quick setup and use with FANUC CRX robot arms.

The flexible balloon-like cup on these lifters use compressed air to grip, lift, and move items with curves, angles, and varied heights.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

The bellows on these cups handle items with varied heights and angles better than flat cups.

Attach these cups to threaded connections on your vacuum system to gently lift bags, plastic film, and other sanitary wrappings.

Connect these cups to your vacuum system to pick up bread, pastries, and other soft material.

Lift smooth items, such as glass, plastic, and sheet metal without leaving marks.

Prevent oily material from slipping free of the suction with these cups.

These cups have an unthreaded mounting hole to attach to a barbed fitting.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Slide these cups onto unthreaded fittings on your vacuum system to gently pick up bags, plastic film, and other sanitary wrappings.

The bellows on these cups handle items with varied heights and angles better than flat cups.

Connect these pads to your vacuum system to lift and move textured items that standard vacuum cups can’t pick up.