A fluorescent orange handle makes these retrievers stand out, so they’re less likely to be misplaced.

An extra-long shaft enables access to material in hard-to-reach areas. These retrievers can pick up heavier objects than our other magnetic retrievers.

Often used to pick up steel sheets, the magnet holds material until you press the lever to disengage it.

LEDs light the magnetized tip and the shaft bends and stays in position to reach objects in awkward spaces.

Protect against accidental contact with live electrical circuits. These insulated retrievers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The shaft bends and stays in position to reach objects in awkward spaces.

The head pivots, so you can pick up screws, nuts, bolts, and other small steel objects from any angle.

View, grab, and position objects in hard-to-reach spots. These retrievers have a camera and light at the tip of the flexible shaft and an LCD that displays live video. In addition to picking up objects, they can be used in applications such as installing wiring behind walls and extracting clogs and debris from pipes.

Bend the shaft to reach into awkward spaces and grab small parts in the wire jaws.

The assorted tools in these sets are used to hold, separate, and position wire, springs, and other small parts.

The handles of these assorted picks have a magnet at the end to pick up small steel objects. Use to hold and position wire, springs, and other small parts.

Hold, separate, and position small parts with one tool. These sets include assorted picks with a different tip at each end.

Sets include a handle and an assortment of tips for holding and positioning wire, springs, and other small parts.

Reach around obstructions and into tight spaces with picks that have long, angled tips. Use these tools to hold, separate, and position wire, springs, and other small parts.

Position circuit board components without solder sticking to these picks.

An insulated handle protects against accidental contact with live electrical circuits. These picks are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Similar to dental instruments, these needle-sharp picks are suitable for work around delicate circuits and components.

Shaped for removing the seals around bearings, insert the tip of these tools behind the seal and pull. The curved head provides leverage to remove stuck and stubborn material.

Pull material out of tight spots. Similar to removing a cork from a bottle, the tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling.

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style.

Also known as packing irons, the offset handle allows you to install packing into hard-to-reach areas while the blunt tip prevents accidentally cutting or damaging the packing material.

Arrange the pins in a series of holes to grip parts with angled or uneven sides.

Pass wires and rods through the hollow body of these vises.

Each end of the vise has a collet to hold a different tool—turn the collar to close the collets around them.

A rubber-covered body provides a comfortable grip. These vises have a rotating end cap on the handle that allows you to apply constant pressure while turning the body of the vise with your fingertips.

Jaw are serrated or grooved to firmly grip workpieces.

Notches on the jaws hold round material on its outside diameter.

Secure small parts in spring clamps to keep hands free for soldering, gluing, and assembly.

Sets include assorted tweezers with each style a different color for easy identification.

These assorted tweezers hold small parts without the need to apply pressure. Squeeze to open the tips and release to close them.

These general purpose tweezers grip a variety of objects.

Extra-long tips provide access to material in hard-to-reach areas.

An LED lights the tips for picking up and positioning in dark areas.

Solder won’t stick to these tweezers. Made of titanium for high strength and durability, they are nonmagnetic and have excellent corrosion resistance.

A PTFE coating on the tips prevents material from sticking to these tweezers.

Prevent buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The cushioned grips drain static from your application and provide comfort and heat protection.

Solder won’t stick to these tweezers. Made of titanium for high strength and durability, they are nonmagnetic and have excellent corrosion resistance. These premium tools are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Remove chips and other delicate components from circuit boards.

Cap the tips of your tweezers to protect them from damage. These flexible silicone covers fit most styles of tweezers.

Keep your tweezers organized in these partitioned cases.

Extend the life of these tweezers by replacing the tips when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components.

Extra-slim jaws taper to a narrow point that can reach into tight spots.

Keep hands away from machinery—use these lightweight tools to pick up and hold parts. The pliers-style handles provide more comfort and control than standard tongs.

A heavy duty steel construction and long handle allow you to grip hot material in furnaces and forging and heat-treating applications.

These cups have an unthreaded mounting hole to attach to a barbed fitting.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Protect static sensitive materials, such as electronics, with these cups that diffuse static buildup.

Slide these cups onto unthreaded fittings on your vacuum system to gently pick up bags, plastic film, and other sanitary wrappings.

These cups are made of FDA listed silicone rubber to withstand the extreme temperatures in food processing applications.

Thread these cups onto your vacuum system to lift and move sanitary items with curves, corners, and uneven surfaces.

Pick up long, narrow items in your sanitary facility with these cups—they connect to threaded fittings on your vacuum system.

Use these cups with a vacuum system to grip, lift, and move flat materials, such as sheet metal and plastic.

The oval shape of this cup provides a greater surface area than other cups, so it is good for lifting long, thin objects without bending them.

Prevent oily material from slipping free of the suction with these cups.

Connect these pads to your vacuum system to lift and move textured items that standard vacuum cups can’t pick up.

Lift and move porous, uneven, and delicate items without damaging them.

The flexible balloon-like cup on these lifters use compressed air to grip, lift, and move items with curves, angles, and varied heights.

These all-in-one lifters include a rubber vacuum cup and a device to generate suction without an installed vacuum system.

Grip, lift, and move food as well as other items with curves, angles, and varied heights in food-processing plants. All of these lifters have a flexible balloon-like cup that’s made of FDA-compliant silicone rubber, so they’re safe for direct contact with food.

Connect these fittings to a vacuum cup and compressed air source to create a vacuum generating system.

Connect these lifters to your robot arm to pick up and move items using suction. They're electric, so you don't need a compressed air source.

Able to rotate 360° and flex to 45°, these fittings help vacuum cups grip items that are positioned at an angle.