Maximum Measurement Maximum Measurement |
|---|
|
|
|
Manufacturer Model Number Manufacturer Model Number |
|---|
Measures Measures |
|---|
|
Minimum Measurement Minimum Measurement |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Operating Mechanism Operating Mechanism |
|---|
|
Battery Chemistry Battery Chemistry |
|---|
|
Electronic Thickness Gauges
Find the thickness of sheet metal, paper, and other flat stock. All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
| 0"-0.47" | 0 mm-12 mm | ±0.00015" | ±0.0038 mm | 0.00005" 0.0001" 0.0005" | 0.001 mm, 0.01 mm | 3/4" | 0.25" | Carbide | Yes | Mitutoyo | 547-400S | 00000000 | 000000 |
Electronic Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure the thickness of sheet metal, paper, and other flat stock. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 1/8" | 0.4" | Ceramic | Yes | Mitutoyo | 547-500S | 00000000 | 0000000 |
| 0"-0.47" | 0 mm-12 mm | ±0.00015" | ±0.0038 mm | 0.00005" 0.0001" 0.0005" | 0.001 mm, 0.01 mm | 3/4" | 0.25" | Carbide | Yes | Mitutoyo | 547-400S | 00000000 | 000000 |
Electronic Thickness Gauges for Pipe and Tubing with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They measure the wall thickness of pipe, tubing, and other curved surfaces. Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. All have SPC data output to connect to a computer or data processor, but model 209-954 needs an SPC output adapter (sold separately) for SPC capabilities.
USB data cables (sold separately) connect gauges directly to your PC.
10-pin data cables (sold separately) connect gauges to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect gauges to your PC through 10-pin data cables.
Wireless data transmitters and receivers (sold separately) allow you to transmit measurement data from gauges to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.050 mm | 0.001" | 0.01 mm | 6 9/16" | 0.12" | Carbide | Ball | Ball | Yes | Mitutoyo | 209-954 | 0000000 | 000000 |
| For Manufacturer Model Number | Each | |
| 209-954 | 0000000 | 0000000 |
| For Manufacturer Model Number | Cord Length | Each | |
| 547-561S, 209-954 | 40" | 0000000 | 0000000 |
| For Manufacturer Series | Includes | Each | |
| U-WAVE-T | USB Cable | 000000 | 0000000 |
Electronic Thickness Gauges for Pipe and Tubing
Measure the wall thickness of pipe, tubing, and other curved surfaces with these gauges. They have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. All have SPC data output to connect to a computer or data processor, but model 209-954 needs an SPC output adapter (sold separately) for SPC capabilities.
USB data cables (sold separately) connect gauges directly to your PC.
10-pin data cables (sold separately) connect gauges to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect gauges to your PC through 10-pin data cables.
Wireless data transmitters and receivers (sold separately) allow you to transmit measurement data from gauges to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Tip Shape | Spindle Tip Shape | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
With SPC Data Output | |||||||||||||||
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 3/4" | 0.14" | Steel | Round | Flat | Yes | Mitutoyo | 547-561S | 00000000 | 0000000 |
| 0"-1.97" | 0 mm-50 mm | ±0.002" | ±0.050 mm | 0.001" | 0.01 mm | 6 9/16" | 0.12" | Carbide | Ball | Ball | Yes | Mitutoyo | 209-954 | 0000000 | 000000 |
| For Manufacturer Model Number | Each | |
| 209-954 | 0000000 | 0000000 |
| For Manufacturer Model Number | Cord Length | Each | |
| 547-561S, 209-954 | 40" | 0000000 | 0000000 |
| For Manufacturer Series | Includes | Each | |
| U-WAVE-T | USB Cable | 000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing, and Flat Surfaces
A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312S | 00000000 | 0000000 |
Electronic Thickness Gauges for Pipe, Tubing,
and Flat Surfaces with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. A reversible anvil lets you adapt the gauge to the shape of the object you are measuring. Use the round face on the anvil to measure the wall thickness of pipe, tubing, and other curved surfaces. Use the flat face to measure sheet metal, paper, and other flat stock.
Zero-position memory, also known as absolute (ABS) positioning, retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.4" | 0 mm-10 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 1 3/16" | 0.236" | Steel | Yes | Mitutoyo | 547-312S | 00000000 | 0000000 |
Pocket Electronic Thickness Gauges
Small enough to fit between your thumb and index finger, use this gauge for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Pocket Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. Small enough to fit between your thumb and index finger, use it for quick thickness checks on paper, film, and other flat stock. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Long-Reach Electronic Thickness Gauges
An extra-deep throat provides a long reach for measuring sheet metal and other large items. This gauge has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 00000000 | 0000000 |
Long-Reach Electronic Thickness Gauges with Calibration Certificate
This gauge comes with a calibration certificate traceable to NIST that states it has passed a test for accuracy. An extra-deep throat provides a long reach for measuring sheet metal and other large items. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
10-pin to USB adapters (sold separately) connect indicators to your PC through 10-pin data cables.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Anvil | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Throat Dp. | Face Dia. | Face Material | Batteries Included | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.47" | 0 mm-12 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | 4 3/4" | 0.4" | Ceramic | Yes | Mitutoyo | 547-520S | 0000000 | 0000000 |
Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. A loop handle allows you to comfortably hold them while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 0000000 | 000000 |
Dial Thickness Gauges
A loop handle allows you to comfortably hold these gauges while operating the thumb lever.
For technical drawings and 3-D models, click on a part number.
Anvil | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Manufacturer | Manufacturer Model Number | Each | |
| 0"-0.05" | ±0.0002" | 0.0001" | 0.01" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7326A | 000000 | 0000000 |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7300A | 000000 | 000000 |
| 0"-1" | ±0.002" | 0.001" | 0.1" | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7304A | 000000 | 000000 |
| 0mm-10mm | ±0.015 mm | 0.01mm | 1mm | 1 1/8" | 0.4" | Ceramic | White | Mitutoyo | 7301A | 000000 | 000000 |
Economy Pocket Dial Thickness Gauges
Small enough to fit between your thumb and index finger, use these gauges for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Anvil | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Measurement per Dial Revolution | Throat Dp. | Face Dia. | Face Material | Dial Face Color | Each | |
| 0"-0.5" | ±0.001" | 0.001" | 0.1" | 1/2" | 0.23" | Steel | White | 00000000 | 000000 |
Starrett Pocket Dial Thickness Gauges
Hold these gauges between your thumb and index finger for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Starrett Pocket Dial Thickness Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They fit between your thumb and index finger for quick thickness checks on paper, film, and other flat stock. Operate by pulling the serrated finger slide to raise the spindle.
Starrett Telescoping Bore Gauge Sets
Spring tension forces two telescoping steel contacts to expand inside the bore; turn the screw to lock the contacts. To find the bore diameter, use a micrometer to measure the distance across the contacts.
| Number of Gauges | Measuring Range | Max. Dp. Measured | Material | Includes | Manufacturer Model Number | Each | |
| 4 | 5/16"-2 1/8" | 2" | Steel | One gauge with 5/16"-1/2" measuring range One gauge with 1/2"-3/4" measuring range One gauge with 3/4"-1 1/4" measuring range One gauge with 1 1/4"-2 1/8" measuring range | S579GZ | 000000 | 0000000 |
| 6 | 5/16"-6" | 2" | Steel | One gauge with 5/16"-1/2" measuring range One gauge with 1/2"-3/4" measuring range One gauge with 3/4"-1 1/4" measuring range One gauge with 1 1/4"-2 1/8" measuring range One gauge with 2 1/8"-3 1/2" measuring range One gauge with 3 1/2"-6" measuring range | S579HZ | 000000 | 000000 |
Starrett Telescoping Bore Gauges
Spring tension forces two telescoping steel contacts to expand inside the bore; turn the screw to lock the contacts. To find the bore diameter, use a micrometer to measure the distance across the contacts.
| Measuring Range | Max. Dp. Measured | Material | Handle Lg. | Manufacturer Model Number | Each | |
| 5/16"-1/2" | 2" | Steel | 2 7/8" | 579A | 000000 | 000000 |
| 1/2"-3/4" | 2" | Steel | 2 7/8" | 579B | 000000 | 00000 |
| 3/4"-1 1/4" | 2" | Steel | 2 7/8" | 579C | 000000 | 00000 |
| 1 1/4"-2 1/8" | 2" | Steel | 2 7/8" | 579D | 000000 | 00000 |
| 2 1/8"-3 1/2" | 2" | Steel | 2 7/8" | 579E | 000000 | 00000 |
| 3 1/2"-6" | 2" | Steel | 4" | 579F | 000000 | 00000 |
Economy Telescoping Bore Gauge Sets
Spring tension forces two telescoping steel contacts to expand inside the bore; turn the screw to lock the contacts. To find the bore diameter, use a micrometer to measure the distance across the contacts.
| Number of Gauges | Measuring Range | Material | Includes | Each | |
| 4 | 5/16"-2 1/8" | Chrome-Plated Brass, Steel | One gauge with 5/16"-1/2" measuring range One gauge with 1/2"-3/4" measuring range One gauge with 3/4"-1 1/4" measuring range One gauge with 1 1/4"-2 1/8" measuring range | 0000000 | 000000 |
| 6 | 5/16"-6" | Chrome-Plated Brass, Steel | One gauge with 5/16"-1/2" measuring range One gauge with 1/2"-3/4" measuring range One gauge with 3/4"-1 1/4" measuring range One gauge with 1 1/4"-2 1/8" measuring range One gauge with 2 1/8"-3 1/2" measuring range One gauge with 3 1/2"-6" measuring range | 0000000 | 000000 |
Starrett Small-Bore Gauge Sets
Insert into small bores, slots, grooves, and recesses and turn the knob on the handle to expand the contacts. To find the bore diameter, use a micrometer to measure the distance across the contacts.
Full-ball gauges are best for deep bores.
Half-ball gauges are best for flat, shallow areas.
| Measuring Range | Material | Number of Gauges | Includes | Manufacturer Model Number | Each | |
Full Ball | ||||||
|---|---|---|---|---|---|---|
| 0.125"-0.5" | Steel | 4 | One full-ball gauge with 0.125"-0.200" measuring range and 2 1/2" max. depth One full-ball gauge with 0.200"-0.300" measuring range and 2 1/2" max. depth One full-ball gauge with 0.300"-0.400" measuring range and 2.7" max. depth One full-ball gauge with 0.400"-0.500" measuring range and 3" max. depth | S829EZ | 000000 | 0000000 |
Half Ball | ||||||
| 0.125"-0.5" | Steel | 4 | One half-ball gauge with 0.125"-0.200" measuring range and 2" max. depth One half-ball gauge with 0.200"-0.300" measuring range and 3" max. depth One half-ball gauge with 0.300"-0.400" measuring range and 3" max. depth One half-ball gauge with 0.400"-0.500" measuring range and 3" max. depth | S831EZ | 000000 | 000000 |
Starrett Small-Bore Gauges
Insert into small bores, slots, grooves, and recesses and turn the knob on the handle to expand the contacts. To find the bore diameter, use a micrometer to measure the distance across the contacts.
Full-ball gauges are best for deep bores.
Half-ball gauges are best for flat, shallow areas.
| Measuring Range | Max. Dp. Measured | Material | Manufacturer Model Number | Each | |
Full Ball | |||||
|---|---|---|---|---|---|
| 0.125"-0.2" | 2 1/2" | Steel | 829A | 000000 | 000000 |
| 0.2"-0.3" | 2 1/2" | Steel | 829B | 000000 | 00000 |
| 0.3"-0.4" | 2.7" | Steel | 829C | 000000 | 00000 |
| 0.4"-0.5" | 3" | Steel | 829D | 000000 | 00000 |
Half Ball | |||||
| 0.125"-0.2" | 2" | Steel | 831A | 000000 | 00000 |
| 0.2"-0.3" | 3" | Steel | 831B | 000000 | 00000 |
| 0.3"-0.4" | 3" | Steel | 831C | 000000 | 00000 |
| 0.4"-0.5" | 3" | Steel | 831D | 000000 | 00000 |
Economy Small-Bore Gauge Sets
Insert into small bores, slots, grooves, and recesses and turn the knob on the handle to expand the contacts. To find the bore diameter, use a micrometer to measure the distance across the contacts. The full-ball design makes these gauges good for measuring deep bores.
| Measuring Range | End Shape | Material | Number of Gauges | Includes | Each | |
| 0.125"-0.5" | Full Ball | Steel | 4 | One full-ball gauge with 0.125"-0.200" measuring range and 61/64" max. depth One full-ball gauge with 0.200"-0.300" measuring range and 1 3/64" max. depth One full-ball gauge with 0.300"-0.400" measuring range and 1 5/32" max. depth One full-ball gauge with 0.400"-0.500" measuring range and 1 19/64" max. depth | 0000000 | 000000 |
Mitutoyo Dial Bore Gauges
Measure the inside diameter of holes and cylindrical bores, as well as identify out-of-roundness problems. Switch between anvils to measure holes of different diameters. They have highly sensitive, wear-resistant jeweled bearings for a long service life.
Dial | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Max. Dp. Measured | Probe Type | Measurement per Dial Revolution | Material | Industry Designation | Dia. | Face Color | Number of Anvils | Manufacturer Model Number | Each | |
| 0.4"-0.7" | ±0.0002" | 0.0001" | 2.4" | B | 0.01" | Steel | AGD Group 2 | 2 1/4" | White | 8 | 526-123 | 000000000 | 0000000 |
| 0.7"-1.4" | ±0.00008" | 0.0001" | 4" | C | 0.01" | Steel | AGD Group 2 | 2 1/4" | White | 9 | 511-751 | 000000000 | 000000 |
| 1.4"-2.5" | ±0.00008" | 0.0001" | 6" | C | 0.01" | Steel | AGD Group 2 | 2 1/4" | White | 6 | 511-752 | 000000000 | 000000 |
| 2"-6" | ±0.00008" | 0.0001" | 6" | C | 0.01" | Steel | AGD Group 2 | 2 1/4" | White | 11 | 511-753 | 000000000 | 000000 |
Economy Dial Bore Gauges
Use these bore gauges to measure the inside diameter of holes and cylindrical bores, as well as identify out-of-roundness problems. Switch between anvils to measure bores of different diameters. All have highly sensitive, wear-resistant jeweled bearings for a long service life.
For technical drawings and 3-D models, click on a part number.
Dial | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Max. Dp. Measured | Probe Type | Measurement per Dial Revolution | Material | Industry Designation | Dia. | Face Color | Number of Anvils | Contact Point Material | Each | |
| 0.7"-1.5" | ±0.0009" | 0.0005" | 8" | A | 0.05" | Steel | AGD Group 2 | 2 1/4" | White | 8 | Carbide | 0000000 | 0000000 |
| 1.4"-6" | ±0.0009" | 0.0005" | 9" | C | 0.05" | Steel | AGD Group 2 | 2 1/4" | White | 15 | Carbide | 0000000 | 000000 |
| 2"-6" | ±0.0009" | 0.0005" | 9" | C | 0.05" | Steel | AGD Group 2 | 2 1/4" | White | 11 | Carbide | 0000000 | 000000 |
Mitutoyo Dial Bore Gauge Sets
Set includes one dial head that fits onto three gauge bodies. Use these to measure the inside diameter of holes and cylindrical bores, as well as identify out-of-roundness problems. Switch between anvils to measure holes of different diameters. The dial head has highly sensitive, wear-resistant jeweled bearings for a long service life.
Dial | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Max. Dp. Measured | Probe Type | Measurement per Dial Revolution | Material | Industry Designation | Dia. | Face Color | Number of Anvils | Manufacturer Model Number | Each | |
| 0.7"-6" | ±0.00008" | 0.0001" | 4", 6" | C | 0.01" | Steel | AGD Group 2 | 2 1/4" | White | 26 | 511-932 | 00000000 | 0000000 |
Electronic Bore Gauges
Use this gauge to measure the inside diameter of holes and cylindrical bores, as well as identify out-of-roundness problems. Switch between anvils to measure bores of different diameters. It has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button allows you to start measuring at any point.
Mitutoyo Wireless Transmitters
Wirelessly transmit measurement data to a PC. Select the cable with the connection that is compatible with your measuring tool’s SPC output port. A wireless receiver (sold separately) is required. Measurement data can be imported into Microsoft Excel or any SPC software.
USB Connection | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Computer Connection Type | Standard | Type | Communication Range, ft. | Lg. | Wd. | Ht. | Includes | Manufacturer Model No. | For Manufacturer Series | Each | |
| USB | 2.0 | A | 60 | 5 1/2" | 3 1/4" | 1 1/4" | USB Cable | 02AZD810D | U-WAVE-T | 000000 | 0000000 |
Mitutoyo USB Cables
Use these cables to connect measuring tools with SPC data output directly to a PC. Select the cable with the connection that is compatible with your measuring tool’s SPC output port. Measurement data can be imported into Microsoft Excel or any SPC software.
USB Connection | |||||||
|---|---|---|---|---|---|---|---|
| Mitutoyo Measuring Tool Connection Type | Standard | Type | Lg. | Manufacturer Model No. | For Manufacturer Model No. | Each | |
| 6 Pin | 2 | A | 80" | 06AFM380E | 209-954 | 000000 | 0000000 |
Mitutoyo 10-Pin Cables
Connect measuring tools with SPC data output to miniprocessors and multiplexers. To extract data from your measuring tool, use these cables with a Mitutoyo 10-Pin to USB Adapter. Select a cable with the connection that is compatible with your measuring tool’s SPC output port.