Pair these male snap halves with female snap halves to make a complete snap.

Kits include a hand punch tool with die and six complete snaps.

Once installed, these fasteners provide a male snap half on both sides of your fabric. Create a complete snap by joining each male side with a female snap half for a finished look on assembled layers of fabric.

Pair with a female snap half to create a complete snap.

The threaded stud installs in threaded holes.

Fasten these male snap halves to a solid surface when you only have access to one side. A blind rivet tool is required for installation.

Use screws to secure these bases in a solid surface.

Access to both sides of the material is required for installation.

Also known as slam rivets, the two heads provide a finished look on both sides of your material.

Create fast connections with items, such as rope, chain, and straps.

Squeeze the trigger to quickly release the latch.

Lock the bolt with wire or a cable tie for a secure connection.

To open, lift and twist the latch 90°.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

Vents in the top allow air circulation and permit heat and fumes to escape. All of these plugs have wings that expand against the sides of the hole to lock them in place.

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Squeeze the adjustable handle to install standard and dual-sided fabric snaps and fabric grommets.

Slide these tools under the head of push-in rivets and squeeze the handles to pop the rivet out. They are also known as panel clip pliers.

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Harnesses have a D-ring that attaches to a lanyard.

Made of heat-resistant Nomex, these harnesses withstand temperatures up to 700° F.

D-rings on each hip provide a stable working position.

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness.

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc flash-resistant harness.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications.

A quick-stop lanyard must be used when you have less than 18 1/2 ft. of fall clearance as it will stop your fall within a few inches.