About Grease Gun Components
More
About Hose
More
High-Temperature Air Hose Impact Absorbers
- Temperature Range: -40° to 210° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Neoprene Rubber
- Color: Blue
- Female Fitting Swivels Until Tightened
Attach these short lengths of hose, often called snubber hose, to your tool to absorb vibration and reduce stress on your source hose. Hose is neoprene, so it withstands high temperatures. Fittings that swivel until tightened are easy to install.
For technical drawings and 3-D models, click on a part number.
18" Lengths | 24" Lengths | 36" Lengths | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | ID | OD | Bend Radius | Max. Pressure | Each | Each | Each | |||
Brass Threaded NPT Male × Brass Threaded NPT Female | ||||||||||
| 1/4 × 1/4 | 1/4" | 1/2" | 2" | 200 psi @ 72° F | 0000000 | 000000 | 0000000 | 000000 | 0000000 | 000000 |
| 3/8 × 3/8 | 3/8" | 5/8" | 3 3/4" | 200 psi @ 72° F | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
| 1/2 × 1/2 | 1/2" | 7/8" | 5" | 200 psi @ 72° F | 0000000 | 00000 | 0000000 | 00000 | 0000000 | 00000 |
Abrasion-Resistant Air Hose Impact Absorbers
- Temperature Range: -40° to 165° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: Polyurethane
- Color: Semi-Clear Blue
- Both Fittings Swivel Until Tightened
Often called snubber hose, these short lengths of hose attach to your tool to absorb vibration and reduce stress on your source hose. Hose is polyurethane, so it stands up to the wear and tear of daily use. Fittings swivel until tightened for easy installation.
For technical drawings and 3-D models, click on a part number.
Lightweight Air Hose Impact Absorbers
- Temperature Range: -20° to 150° F
- Maximum Vacuum: 28" of Hg @ 72° F
- Material: PVC
- Color: Blue
- Female Fitting Swivels Until Tightened
These short lengths of hose, also known as snubber hose, attach to your tool to absorb vibration and reduce stress on your source hose. Hose is PVC, so it's light and easy to handle. Fittings that swivel until tightened are easy to install.
For technical drawings and 3-D models, click on a part number.
Hose Whip Checks
OSHA compliant, these whip checks stop your hose from whipping when couplings are accidentally disconnected under pressure.
Whip checks with spring-loaded loop ends are for hose-to-hose use. The loops slip over the ends of your hose.
Whip checks with spring-loaded loop end and choker end are for hose-to-tool use. The loop goes over the hose end, and the choker goes on your tool.
Whip checks with loop ends work with the widest range of hose diameters in our offering. As the inside diameter of a compatible hose increases, the maximum pressure decreases.
Whip checks with loop end and bolt end can bolt to a surface on one end for a secure connection. They’re able to handle the high pressures of hydraulic hose.
Cable | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Dia. | Lg. | Material | For Max. Pressure, psi | Specifications Met | Each | |
| 1/2" - 1 1/4" | 1/8" | 20 1/4" | Steel | 200 | MSHA (Mine Safety and Health Administration) Standards, OSHA Compliant 29 CFR 1926.603 | 0000000 | 000000 |
| 1 1/2" - 3" | 1/4" | 38" | Steel | 200 | MSHA (Mine Safety and Health Administration) Standards, OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 4" | 3/8" | 44" | Steel | 200 | MSHA (Mine Safety and Health Administration) Standards, OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
Cable | |||||||
|---|---|---|---|---|---|---|---|
| For Hose ID | Dia. | Lg. | Material | For Max. Pressure, psi | Specifications Met | Each | |
| 1/2" - 1 1/4" | 1/8" | 20 1/4" | Steel | 200 | MSHA (Mine Safety and Health Administration) Standards, OSHA Compliant 29 CFR 1926.603 | 0000000 | 000000 |
| 1 1/2" - 3" | 1/4" | 38" | Steel | 200 | MSHA (Mine Safety and Health Administration) Standards, OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 4" | 3/8" | 44" | Steel | 200 | MSHA (Mine Safety and Health Administration) Standards, OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
Cable | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Hose ID | Lg. | Wd. | Thick. | Material | For Max. Pressure (For Hose ID) | Specifications Met | Each | |
| 1/2" - 2" | 30" | 1" | 3/8" | Nylon Fabric | 13,000 psi (1/2") 3,300 psi (1") 750 psi (2") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 000000 |
| 1/2" - 2" | 30" | 1 1/8" | 1" | Nylon Fabric | 37,000 psi (1/2") 9,400 psi (1") 2,300 psi (2") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 1" - 4" | 44" | 1" | 3/8" | Nylon Fabric | 3,300 psi (1") 750 psi (2") 200 psi (4") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 1" - 4" | 44" | 1 1/8" | 1" | Nylon Fabric | 9,400 psi (1") 2,300 psi (2") 580 psi (4") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 2" - 6" | 64" | 1" | 3/8" | Nylon Fabric | 750 psi (2") 200 psi (4") 90 psi (6") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 2" - 6" | 64" | 1 1/8" | 1" | Nylon Fabric | 2,300 psi (2") 580 psi (4") 260 psi (6") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 2" - 6" | 74" | 1" | 3/8" | Nylon Fabric | 750 psi (2") 200 psi (4") 90 psi (6") | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
Cable | ||||||||
|---|---|---|---|---|---|---|---|---|
| For Hose ID | Lg. | Wd. | Thick. | Material | For Max. Pressure, psi | Specifications Met | Each | |
| 1/4" - 3/4" | 11 1/2" | 3/4" | 1/8" | Polyester Fabric | 7,250 | OSHA Compliant 29 CFR 1926.603 | 0000000 | 000000 |
| 3/4" - 1 1/2" | 18 1/2" | 3/4" | 1/8" | Polyester Fabric | 7,250 | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
| 1 1/2" - 2" | 24" | 3/4" | 1/8" | Polyester Fabric | 7,250 | OSHA Compliant 29 CFR 1926.603 | 0000000 | 00000 |
Flexible Precision Grease-Dispensing Tip Adapters
Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations. This adapter has a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.
For technical drawings and 3-D models, click on a part number.
Dispensing Tip Adapter | Needle | |||||
|---|---|---|---|---|---|---|
| Lg. | Material | Fitting Material | Lg. | Material | Each | |
0.065" Needle OD (16 Gauge) | ||||||
| 16 1/2" | Nylon Plastic | Brass | 1 1/2" | Stainless Steel | 0000000 | 000000 |
Flexible Grease Nozzles
Nozzles have threads on both ends for connecting a grease gun to a dispensing tip.
Nozzles with spring guard have a steel spring guard that prevents kinking.
Nozzle | Nozzle Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Material | Reinforcement Material | Fitting Material | Max. Grease Outlet Pressure, psi | Thread Type | Pipe/Thread Size | Gender | Each | |
Nozzles | |||||||||
| 11 13/16" | Polyethylene Plastic | __ | Steel | 6,000 | Metric | M10 | Male | 0000000 | 000000 |
| 12" | Polyurethane Rubber | __ | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 0000 |
| 18" | PVC Plastic | Kevlar | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 |
| 19 11/16" | Polyethylene Plastic | __ | Steel | 6,000 | Metric | M10 | Male | 0000000 | 00000 |
| 20" | Polyurethane Rubber | __ | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 0000 |
Nozzles with Spring Guard | |||||||||
| 12" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
| 18" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
| 18" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
| 18" | PVC Plastic | Kevlar | Steel | 10,000 | NPT | 1/8 | Male | 0000000 | 00000 |
| 24" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
| 24" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
| 30" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
| 36" | Buna-N Rubber | __ | Steel | 7,500 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
| 36" | Nylon Plastic | __ | Steel | 5,000 | NPT | 1/8 | Male | 000000 | 00000 |
| 36" | Polyester Elastomer Rubber | __ | Steel | 10,000 | NPTF UNF | 1/8 7/16"-20 | Male Male | 0000000 | 00000 |
| 36" | PVC Plastic | Kevlar | Steel | 10,000 | NPT | 1/8 | Male | 0000000 | 00000 |
| 42" | Polyurethane Rubber | __ | Steel | 10,000 | NPT UNEF | 1/8 7/16"-28 | Male Male | 0000000 | 00000 |
Rigid-to-Flexible Grease Nozzles with Dispensing Tip
Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle. The nozzle has a dispensing tip on one end and threads on the other end for connecting to a grease gun.
For technical drawings and 3-D models, click on a part number.
Nozzle | Dispensing Tip | Nozzle Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Material | Lg. | Style | Material | Max. Grease Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Each | |
For Standard Grease Fittings | ||||||||||
| 13" | Polyurethane Rubber, Steel | 1 1/4" | Straight | Steel | 5,000 | NPT | 1/8 | Male | 0000000 | 000000 |
Flexible Grease Nozzles with Dispensing Tip
These nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.
Nozzles with spring guard have a steel spring guard that prevents kinking.
For technical drawings and 3-D models, click on a part number.
Nozzles with Dispensing Tip | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Nozzle | Dispensing Tip | Nozzle Connection | Replacement Seal Kits | ||||||||||
| Lg. | Material | Reinforcement Material | Lg. | Style | Material | Max. Grease Outlet Pressure, psi | Thread Type | Pipe Size | Gender | Each | Each | ||
For Standard Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
| 12" | Polyurethane Rubber | __ | 1" | Straight | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
| 20" | Polyurethane Rubber | __ | 1" | Straight | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
| 36" | PVC Plastic | Kevlar | 1 5/8" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
Nozzles with Spring Guard | |||||||||||||
| 12" | Buna-N Rubber | __ | 2 1/2" | Straight | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
| 18" | Buna-N Rubber | __ | 2 1/2" | Straight | Steel | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
| 36" | Nylon Plastic | __ | 1 7/16" | Straight | Steel | 3,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
For 5/8" Button-Head Style Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
| 12" | Polyethylene Plastic | __ | 15/16" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 00000 |
| 20" | Polyethylene Plastic | __ | 15/16" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 0000 |
Nozzles with Spring Guard | |||||||||||||
| 12" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
| 36" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
For 7/8" Button-Head Style Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
| 12" | Polyethylene Plastic | __ | 1" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 0000 |
| 20" | Polyethylene Plastic | __ | 1" | 90° Angle | Aluminum | 4,500 | NPT | 1/8 | Male | 0000000 | 00000 | 0000000 | 0000 |
Nozzles with Spring Guard | |||||||||||||
| 12" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
| 36" | Buna-N Rubber | __ | 1 1/2" | 90° Angle | Steel | 4,000 | NPT | 1/8 | Male | 0000000 | 000000 | 000000 | 00 |
For Pin-Style Grease Fittings | |||||||||||||
Nozzles | |||||||||||||
| 12" | Synthetic Rubber | __ | 1 1/2" | Straight | Steel | 4,800 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
| 18" | Synthetic Rubber | __ | 1 1/2" | Straight | Steel | 4,800 | NPT | 1/8 | Male | 0000000 | 00000 | 000000 | 00 |
Flexible Grease-Dispensing Tip Extensions
Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.