Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These short sockets fit spaces where height clearance is limited.

With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.

Grip the indentations around the outside of tri-groove fasteners.

These sockets fit the nuts found on water and gas valves.

Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.

Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.

Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-hex or pin-in-socket bits.

These sockets are also known as pin-in-Torx bits.

These sockets are also known as Robertson bits.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.

Pivot the head to access fasteners from an angle.

A magnet holds the fastener securely enough to drive self-tapping screws.

Pivot the head to access fasteners from an angle.

Tighten or loosen nuts and bolts without damaging the finish.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Quickly position these sockets on square fasteners.

Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.

A magnet holds the fastener securely enough to drive self-tapping screws.

Suitable for occasional maintenance work, these sets are imported.

Pivot the head to access fasteners from an angle.

Suitable for occasional maintenance work, these sets are imported.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Grip the indentations around the outside of tri-groove fasteners.

The short bit on these sockets fits in spaces where height clearance is limited.

The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.

These sockets are also known as pin-in-Torx bits.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.

Lock your socket into the extension to prevent accidental disengagement..

Convert from one square drive size to another.

Attach to your socket for a longer reach.

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

Lock your socket into the extension to prevent accidental disengagement.

Push the square drive through the adapter to change size.

Turn sockets with a bit screwdriver.

Made of aluminum-bronze, these extensions satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Bend these extensions around obstructions to turn hard-to-reach fasteners.

The square drive has a rounded shape that allows the extension to pivot inside the socket opening and turn it from an angle.

A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.

Adapters are set to a specific torque and cannot be adjusted.

Pivot the head to access fasteners from an angle.

Attach one of these adapters to a socket to turn it with an open-end or box wrench.

Attach to your socket for a longer reach.

A magnet holds the socket, making changes quicker.

Pull the collar to quickly attach and remove sockets.

Bend these extensions around obstructions to access hard-to-reach fasteners.

Bend around obstructions to turn hard-to-reach fasteners.

A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.

When the ratchet head becomes worn or damaged, change it out for a new one.

The handle is covered in rubber for a comfortable grip.

Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.

Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.

Pivot the head to access fasteners in tight spots.

The 20° offset head provides clearance when reaching over obstructions.

A rubber coating provides a comfortable grip.

Position the head anywhere along the handle.

Pivot the head to access fasteners in tight spots.

Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.

Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.