We will reply to your message within an hour.
Convert from one square drive size to another.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Convert your socket into a flex socket to access fasteners from an angle.
Convert your socket into a flex socket without worrying about the adapter falling off.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
Attach your square-drive sockets to drills, powered screwdrivers, and other tools that accept a hex shank.
Insulated to protect against accidental contact with live electrical circuits, these adapters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505 standards.
Turn sockets with a bit screwdriver.
Attach a socket to one of these adapters—the base has a hex shape so you can use a ratchet wrench along with an open-end or box wrench for additional leverage.
Change a standard wrench handle into a ratcheting wrench.
Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.
Fit these adapters between a wrench and socket to enable finger tightening.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Set a desired torque within the range.
Already set to a specific torque limit, these adapters audibly click and release when you reach that setting to prevent overtightening.
A magnet holds the socket, making changes quicker.
Convert your impact socket into a flex socket to access fasteners from an angle.
Pull the collar to quickly attach and remove sockets.
Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.
Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.
Attach your square-drive impact socket to a spline-drive impact wrench.
These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.
Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.