The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

With five rosin flux cores, this solder joins faster, uses less material, and transmits less heat than single-flux-core solder.

This solder is commonly used in solder melting pots.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

Made with lead and silver, this solder ribbon has greater tensile strength and density than other indium-based solders, giving it a stronger hold. Solder ribbon is more easily used on large, flat areas than wire solder.

For use on large, flat areas, this indium ribbon solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal.

This solder is commonly used in solder melting pots.

The flux residue easily washes away with water.

This solder is commonly used in solder melting pots.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

The flux leaves minimal residue so there's no cleanup.

Without a flux core, this solder allows you to choose the flux that works best for your application.

This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.

Fill this dispenser with the flux of your choice to prepare electrical assemblies and printed circuit boards for soldering.

This flux meets NSF/ANSI Standard 61 for drinking water.

This flux paste provides the fastest removal of flux from pipe lines.

This flux causes solder to flow in a thin film to create joints using minimal solder.

Solder with complete control over the temperature—these stations let you adjust as you go.

These stations are ESD (electrostatic discharge) safe to protect sensitive components. The tip is a fixed temperature—change out the tip to adjust the temperature.

Use these irons for your high-volume jobs.

These irons put an extra layer of cork insulation between your hand and the iron.

These irons have a large tip for excellent heat transfer, making them ideal for running seams in sheet metal.

These guns heat up the instant you pull the trigger and cool down quickly when you let go.

A plier-style handpiece confines heat to only where it touches when you’re treating, brazing, and silver soldering small parts.

These irons run on AA batteries and are for intermittent use.

Kits include an iron, tips for a variety of applications, a heat-shrink attachment, an ejector, and a cap.

These cordless irons run on butane gas, so you don't have to recharge a battery between uses.

These irons are continuous duty.

Touch the tip of your soldering iron for a fast, accurate temperature reading. Within about five seconds, you'll know how hot the iron is, so you can decide whether it's ready for your particular soldering material and application.

Start brazing with this assortment that includes alloy without cadmium for joining dissimilar metals, alloy without cadmium for copper and copper alloys, and a jar of flux.

Use these cadmium-free alloys with most metals in general purpose applications.

No need to add flux—these alloys have it built in.

These alloys create stronger bonds than standard brazing alloys.

Join copper tubing and tube fittings with a stronger bond than standard brazing rings for copper.

These alloys melt into thicker liquid than standard brazing alloys for copper, which allows them to fill larger gaps.

Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.

Use this flux with silver brazing alloys to clean and prepare surfaces. It is boron modified and residue washes off with hot water.

Without a flux core, these braids allows you to choose the flux that works best for your application.

Also known as solder suckers, these tools remove heated, liquid solder.

Connect these torches to a propane cylinder for light-duty flame applications.

The torch tip rotates 360° to put the heat exactly where you need it.

Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.

Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.

Kits include a torch, a solder tip, a heat tip, a hot knife tip, a heat-shrink attachment, a foam cutter, a wire cutter, needle-nose pliers, 60/40 tin/lead solder, a sponge, and a case.

The low profile of these torches saves bench space and the wide, heavy base adds stability.

Use these tools to hold, separate, and position wire, springs, and other small parts.

The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

A different tip at each end allows you to install, extract, and position parts with one tool.

Solder won’t stick to these assorted picks, which are used for positioning circuit board components.

These assorted picks have insulated handles that protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

The assorted picks in these sets are used to install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Similar to dental instruments, these needle-sharp picks are suitable for work around delicate circuits and components.

An integral component of casting babbitt bearings, apply a thin coat of this paste to bronze, cast iron, and steel bearing housings before casting to prevent separation.

With 99.9% tin content, this material is considered commercially pure. It's commonly used to make gaskets and filters.

Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.