The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

With five rosin flux cores, this solder joins faster, uses less material, and transmits less heat than single-flux-core solder.

The high melting point prevents remelting when soldering successive joints with another solder.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

This solder is commonly used in solder melting pots.

The flux residue easily washes away with water.

The flux residue easily washes away with water.

Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.

This solder is commonly used in solder melting pots.

Made with lead and silver, this solder ribbon has greater tensile strength and density than other indium-based solders, giving it a stronger hold. Solder ribbon is more easily used on large, flat areas than wire solder.

For use on large, flat areas, this indium ribbon solder is soft and malleable—even as temperatures approach absolute zero—to form an airtight seal between metal.

Use this flux for non-potable (nondrinking) water applications.

This flux causes solder to flow in a thin film to create joints using minimal solder.

Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.

The flux residue easily washes away with water.

No need to add flux—these alloys have it built in.

These alloys create stronger bonds than standard brazing alloys.

When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard gap-filling brazing alloys.

Start brazing with this assortment that includes alloy without cadmium for joining dissimilar metals, alloy without cadmium for copper and copper alloys, and a jar of flux.

Join copper tubing and tube fittings with a stronger bond than standard brazing rings for copper.

These alloys melt into thicker liquid than standard brazing alloys for copper, which allows them to fill larger gaps.

Also known as trimetal brazing strips, these alloys have silver with nickel alloy sides and a copper core.