We will reply to your message within an hour.
These torches handle brazing and soldering, as well as heating jobs.
These torches have approximately half the BTU output of standard propane torches for use in light duty applications.
Connect these torches to a propane cylinder for light-duty flame applications.
Tackle roofing and other heavy duty heating applications—these torches have a BTU output starting at nearly seven times the output of standard propane torches.
The torch tip rotates 360° to put the heat exactly where you need it.
Two burners with a short, wide flame concentrate heat over a large area. The tip rotates 360° to put the heat exactly where you need it.
Access overhead and other hard-to-reach applications.
Save time by quickly connecting and disconnecting your propane torch tips to get the right output for your job. Kits can also be used with Apachi, HPG, and propylene.
Solder, desolder, and handle light brazing with these torches.
This torch includes a standard solder tip as well as a heat tip for applications that require heat without an exposed flame.
Kits include a torch, a solder tip, a heat tip, a hot knife tip, a heat-shrink attachment, a foam cutter, a wire cutter, needle-nose pliers, 60/40 tin/lead solder, a sponge, and a case.
The low profile of these torches saves bench space and the wide, heavy base adds stability.
Get flame temperatures from these torches that are capable of cutting, welding, and brazing steel up to 3/16" thick.
Kits include a torch handle, tips, and a regulator.
This solder is commonly used in solder melting pots.
Use this solder for general purpose applications.
Acid flux has strong cleaning action, but leaves corrosive residue that washes away with water.
Rosin flux is quick acting with strong cleaning action, but it leaves residue that requires flux remover.
The five flux cores allow fast soldering that uses less solder and transmits less heat to the joint. Rosin flux is quick acting with strong cleaning action but leaves residue that requires flux remover.
Electrically conductive and with five flux cores, this solder speeds up the process of soldering electronics, so you use less solder and transmit less heat to the joint. Easily wash away the flux residue with just water.
The flux leaves minimal residue so there's no need for cleanup.
The five flux cores in this solder allow fast soldering that uses solder efficiently and reduces the heat to your joint. The flux it’s filled with leaves minimal residue so there’s no cleanup. This solder is electrically conductive, making it good for electronics and electrical applications.
Wash away flux residue from this solder with water.
Electrically conductive, this solder is best for electronics and electronics applications.
This solder is commonly used in solder melting pots
The high melting point prevents remelting when soldering successive joints with another solder.
Rosin flux is quick acting with strong cleaning action, but leaves residue that requires flux remover.
The silver in this solder helps it resist vibration to form strong joints in HVAC systems. Since it doesn’t have a flux core, you can choose the flux that works best for your application.
The flux leaves minimal residue so there's no cleanup.
Composed of pure tin, this solder is safe for use with food service equipment.
Made with indium this solder is soft and malleable—even as temperatures approach absolute zero—allowing this solder to form an airtight seal between metal and certain non-metal materials. Thanks to its ribbon shape, this solder is easier to use on large, flat areas than wire solder.
Even as temperatures approach absolute zero, this indium solder remains soft and malleable, allowing it to form an airtight seal between metal and certain non-metal materials..
This solder keeps its strength in applications where vibration and frequent and extreme temperature changes occur, such as in water lines and refrigeration equipment.
The flux residue easily washes away with water.
This solder meets NSF/ANSI Standard 61 for drinking water.
This bismuth-tin solder has similar performance properties to lead solder, but is also safe for use in food-processing equipment and copper water pipes.
Flux is not required for this solder to form strong joints.
Without a flux core, this solder allows you to choose the flux that works best for your application.
Often used on metal that is difficult to solder, this flux works with stainless steel, Monel, and Inconel.
Solder aluminum to itself, copper, or brass.
Use this flux for plumbing applications.
Often used to solder aluminum to difficult-to-solder metal such as stainless steel and nickel, this flux works in applications up to 800° F.
This flux is the fastest to remove from plumbing pipelines.
This flux causes solder to flow in a thin film to create joints using minimal solder.
Fortified with tin, this flux protects nondrinking water pipes from oxidation, especially under temperatures up to 600° F.
Specially formulated, this Nokorode flux remains soft and sticky in temperatures down to -4° F and protects your solder joint from corrosion.
A special formulation of Nokorode soldering flux, this flux remains thick at temperatures up to 115° F and protects your solder joint from corrosion.
Protect the solder joint from corrosion with this flux paste.
Fill this dispenser with the flux of your choice to prepare electrical assemblies and printed circuit boards for soldering.
Providing the strongest cleaning power, this flux leaves residue that must be removed to ensure the reliability of the joint.
This flux has strong cleaning action and leaves residue that will not compromise the reliability of the joint.
With the strongest cleaning power, this flux is fully activated to clean and prepare electrical assemblies and printed circuit boards for soldering applications up to 840° F.
This flux leaves minimal residue so there's no cleanup. It cleans and prepares electrical assemblies and printed circuit boards for soldering.
This flux has less cleaning action, but leaves the least amount of residue.
Prepare workpieces for low-temperature lead-free soldering. This flux leaves minimal residue, so there’s no cleanup required.
Also known as solder slugs, these pellets create strong, electrically conductive connections between battery terminal lugs and cable.
Keep your solder spools organized.
Adjust the tip temperature to suit your application using a button control.
Kits include an iron, tips for a variety of applications, a heat-shrink attachment, an ejector, and a cap.
Kits include an iron, tips for a variety of applications, a stand, a sponge, and a cap.
These cordless irons run on butane gas, so you don't have to recharge a battery between uses.
Solder in spaces that are difficult to reach without waiting for a battery to charge.
Combine a handle, a heating element, and a tip to create the iron you need.
These irons put an extra layer of cork insulation between your hand and the iron.
Use these irons for your high-volume jobs.
From electronics to metal sealing, these irons handle intermittent soldering jobs.
Ultra thin, these irons are for precise soldering in electronics applications.
These irons have a large tip for excellent heat transfer, making them ideal for running seams in sheet metal.
These irons come with one fixed temperature tip—to adjust the temperature, change out the tip.
With the push of a button, these irons convert from a straight grip to a pistol grip with either a 45° or 90° head angle. Battery power and no cord means you can take them where you need them.
A rechargeable battery powers these irons.
These irons run on AA batteries and are for intermittent use.
Bar cleaner removes heavy oxidation from soldering tips and coppers.
Tinner removes excess oxide and replenishes the tip’s original coating.
Remove oxidation from soldering tips with these dry brass-wool balls.
Sensor-activated brushes remove oxides, debris, and excess solder from soldering tips without damaging their plating. Insert your soldering tip to automatically start cleaning.
Hold a sponge for cleaning soldering iron tips.
Ignite your gas torch with these hands-free lighters—they rest on a bench or tabletop, leaving you free to hold solder, workpieces, and other tools.
Electric multispark discharge means these lighters never need flints, batteries, or charging.
Strike the flint to generate a spark.
Three flints, no waiting—when one flint wears out, rotate the holder to get a fresh one.
Pull the trigger to get a spark.
Push the button to create a continuous flame.
Butane burns cleaner than propane at similar temperatures. Use it in heating, thawing, and soldering applications.
Produce a concentrated flame for small objects.