These valves are rated for use in hazardous locations with flammable gas and combustible dust. They operate on electricity to automatically start and stop flow. Valves are normally closed unless actuated. The actuator is directly mounted to the valve body to minimize movement and reduce wear.

Pressure drop assisted valves require a minimum pressure drop between the inlet and the outlet for operation; the upstream pressure must be greater than the downstream pressure.

Hazardous location environmental ratings indicate whether manufacturers have included safety features in products to facilitate their safe use in a hazardous environment. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Built to withstand the extreme cold of liquid nitrogen and liquid oxygen, these valves are cleaned and bagged for high-purity applications. They operate on electricity to automatically start and stop flow.

All valves are normally closed unless actuated. The actuator is directly mounted to the valve body to minimize movement and reduce wear.

Zero pressure drop valves don’t require a minimum pressure drop between the inlet and outlet for operation.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.