For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Actuation Actuation |
|---|
--30402310031599830276-p9@1x_637354092326867916.png?ver=imagenotfound) | Electric (Solenoid) |
Valve Type Valve Type |
|---|
|
Duty Cycle Duty Cycle |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
Pressure Drop Pressure Drop |
|---|
|
Flow Pattern Flow Pattern |
|---|
 |
| L-Pattern |
Maximum Pressure Maximum Pressure |
|---|
|
Valve Starting Position Valve Starting Position |
|---|
|
Wire Connection Type Wire Connection Type |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
 | Hardwire |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
About Actuated On/Off Valves
More
Noncontact Solenoid On/Off Valves for Chemicals
- For Use With: Water, Air, Acetone, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Sodium Hypochlorite, Sulfuric Acid, Phosphoric Acid, Sodium Hydroxide
- Specifications Met: IP65
For applications sensitive to contamination, these valves stop flow without contacting the process media by pressing down on the outside of tubing. They operate on electricity to automatically start and stop flow.
These valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear. Valves meet IP65 for resistance to low-pressure jets of water and dust.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | ID | Max. Tube Durometer | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Dia. | O'all Ht. | No. of Mounting Slots | Mounting Slot Lg. | Fasteners Included | Each | |
Anodized Aluminum Body with DIN Connection | ||||||||||||
Normally Closed—12V DC | ||||||||||||
| 1/8" | 1/16" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 5/8" | 2 1/8" | 2 | 1/8" | No | 00000000 | 0000000 |
| 3/16" | 1/8" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1" | 3 3/8" | 2 | 1/8" | No | 00000000 | 000000 |
| 3/8" | 1/4" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1 3/16" | 4" | 2 | 1/8" | No | 00000000 | 000000 |
Normally Closed—24V DC | ||||||||||||
| 1/8" | 1/16" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 5/8" | 2 1/8" | 2 | 1/8" | No | 00000000 | 000000 |
| 3/16" | 1/8" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1" | 3 3/8" | 2 | 1/8" | No | 00000000 | 000000 |
| 3/8" | 1/4" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1 3/16" | 4" | 2 | 1/8" | No | 00000000 | 000000 |
Solenoid Diverting Valves for Chemicals
- For Use With: Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol, Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene
- Seal Material: PTFE Plastic
Often used for chemical analysis and other laboratory testing, these valves have a PTFE seal and body to withstand aggressive and corrosive solutions. All operate on electricity to automatically divert flow between ports. They do not require a pressure drop for operation. Any port can be used as an inlet or an outlet. Valves can direct flow from the inlet port to either outlet port. They cannot shut off flow. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Size | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Mounting Fasteners Included | No. of | Thread Size | Each | |
PTFE Plastic Body with Wire Leads—12V DC | |||||||||||||||
NPS Female × NPS Female × NPS Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 0000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 00000 |
PTFE Plastic Body with Wire Leads—24V DC | |||||||||||||||
NPS Female × NPS Female × NPS Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 00000 |