Clear All
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Warning: Products have one, but not necessarily all, of the selected characteristics.
Pipe Size Pipe Size |
|---|
Shape Shape |
|---|
 | Tee |
Body Material Body Material |
|---|
|
Ball Material Ball Material |
|---|
|
Valve Function Valve Function |
|---|
|
Actuation Actuation |
|---|
--30402310031599830276-p9@1x_637354092326867916.png?ver=imagenotfound) | Electric (Solenoid) |
Flow Pattern Flow Pattern |
|---|
 |
| L-Pattern |
Maximum Pressure Maximum Pressure |
|---|
|
Valve Type Valve Type |
|---|
|
Number of Ports Number of Ports |
|---|
|
Duty Cycle Duty Cycle |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
 | Hardwire |
Actuator Housing Material Actuator Housing Material |
|---|
|
Seal Material Seal Material |
|---|
|
Connection Type Connection Type |
|---|
 | Pipe |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Actuated On/Off Valves
More
Solenoid Diverting Valves for Chemicals
- For Use With: Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol, Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene
- Seal Material: PTFE Plastic
Often used for chemical analysis and other laboratory testing, these valves have a PTFE seal and body to withstand aggressive and corrosive solutions. All operate on electricity to automatically divert flow between ports. They do not require a pressure drop for operation. Any port can be used as an inlet or an outlet. Valves can direct flow from the inlet port to either outlet port. They cannot shut off flow. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Size | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Mounting Fasteners Included | No. of | Thread Size | Each | |
PTFE Plastic Body with Wire Leads—12V DC | |||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 0000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 00000 |
PTFE Plastic Body with Wire Leads—24V DC | |||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 00000 |