For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Actuation Actuation |
|---|
--30402310031599830276-p9@1x_637354092326867916.png?ver=imagenotfound) | Electric (Solenoid) |
Valve Starting Position Valve Starting Position |
|---|
|
Valve Function Valve Function |
|---|
|
Valve Type Valve Type |
|---|
|
Mounting Orientation Mounting Orientation |
|---|
|
Shape Shape |
|---|
 | Straight |
Duty Cycle Duty Cycle |
|---|
|
Pressure Drop Pressure Drop |
|---|
|
Wire Connection Type Wire Connection Type |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
 | Hardwire |
Maximum Current Draw Maximum Current Draw |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
About Actuated On/Off Valves
More
Noncontact Solenoid On/Off Valves for Chemicals
- For Use With: Water, Air, Acetone, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Sodium Hypochlorite, Sulfuric Acid, Phosphoric Acid, Sodium Hydroxide
- Specifications Met: IP65
For applications sensitive to contamination, these valves stop flow without contacting the process media by pressing down on the outside of tubing. They operate on electricity to automatically start and stop flow.
These valves are normally closed unless actuated. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear. Valves meet IP65 for resistance to low-pressure jets of water and dust.
For technical drawings and 3-D models, click on a part number.
For Tube | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | ID | Max. Tube Durometer | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Dia. | O'all Ht. | No. of Mounting Slots | Mounting Slot Lg. | Fasteners Included | Each | |
Anodized Aluminum Body with DIN Connection | ||||||||||||
Normally Closed—12V DC | ||||||||||||
| 1/8" | 1/16" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 5/8" | 2 1/8" | 2 | 1/8" | No | 00000000 | 0000000 |
| 3/16" | 1/8" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1" | 3 3/8" | 2 | 1/8" | No | 00000000 | 000000 |
| 3/8" | 1/4" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1 3/16" | 4" | 2 | 1/8" | No | 00000000 | 000000 |
Normally Closed—24V DC | ||||||||||||
| 1/8" | 1/16" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 5/8" | 2 1/8" | 2 | 1/8" | No | 00000000 | 000000 |
| 3/16" | 1/8" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1" | 3 3/8" | 2 | 1/8" | No | 00000000 | 000000 |
| 3/8" | 1/4" | 50A | 10 psi @ 140° F | Zero Pressure Drop | 15° to 140° | 1 3/16" | 4" | 2 | 1/8" | No | 00000000 | 000000 |
Solenoid On/Off Valves for Chemicals
To stand up to aggressive and corrosive solutions in chemical-processing applications, these valves have a plastic body and a fluoroelastomer seal. They operate on electricity to automatically start and stop flow. Valves have union fittings on each end that separate into multiple pieces for easy installation and removal from your pipeline. They come with both threaded NPT fittings and unthreaded socket-connect female fittings.
All are normally closed unless actuated. Valves don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is directly mounted to the valve body to minimize movement and reduce wear. Valves meet NEMA 4X for resistance to washdowns, splashing water, corrosive liquid, and dust.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- For Use With: Water, Oil, Diesel Fuel, Ethylene Glycol, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Salt Water, Sodium Hypochlorite, Sulfuric Acid, Citric Acid, Phosphoric Acid
- Ball Material: PVC Plastic
- Diaphragm Material: Fluoroelastomer Rubber
- Actuator Housing Material: Plastic
- Specifications Met: CSA Certified, NEMA 4X
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | No.of Mounting Slots | Mounting Slot Lg. | Fasteners Included | Each | |
Normally Closed—120V AC | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | Female | NPT | 2.3 | 120 psi @ 70° F | Zero Pressure Drop | 35° to 140° | 5 1/2" | 6 3/8" | 2 | 1/4" | No | 0000000 | 0000000 |
| 3/4 | Female | NPT | 3.2 | 120 psi @ 70° F | Zero Pressure Drop | 35° to 140° | 5 1/2" | 6 5/8" | 2 | 1/4" | No | 0000000 | 000000 |
| 1 | Female | NPT | 3.8 | 120 psi @ 70° F | Zero Pressure Drop | 35° to 140° | 5 1/2" | 6 5/8" | 2 | 1/4" | No | 0000000 | 000000 |
- For Use With: Water, Diesel Fuel, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Salt Water, Sodium Hypochlorite, Sulfuric Acid, Citric Acid, Phosphoric Acid
- Diaphragm Material: Fluoroelastomer Rubber
- Actuator Housing Material: Plastic
- Specifications Met: CSA Certified, NEMA 4X
| Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | No.of Mounting Slots | Mounting Slot Lg. | Fasteners Included | Each | |
Normally Closed—120V AC | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2 | Female | NPT | 2.3 | 120 psi @ 70° F | Zero Pressure Drop | 35° to 190° | 5 5/16" | 6 3/8" | 2 | 1/4" | No | 0000000 | 0000000 |
| 3/4 | Female | NPT | 3.2 | 120 psi @ 70° F | Zero Pressure Drop | 35° to 190° | 5 1/2" | 6 5/8" | 2 | 1/4" | No | 0000000 | 000000 |
| 1 | Female | NPT | 3.8 | 120 psi @ 70° F | Zero Pressure Drop | 35° to 190° | 5 1/2" | 6 5/8" | 2 | 1/4" | No | 0000000 | 000000 |