Clear All
Thread Type Thread Type |
|---|
Shape Shape | Show |
|---|
|
Actuation Actuation |
|---|
--30402310031599830276-p9@1x_637354092326867916.png?ver=imagenotfound) | Electric (Solenoid) |
Valve Function Valve Function |
|---|
|
Flow Pattern Flow Pattern |
|---|
 |
| L-Pattern |
Voltage Voltage |
|---|
|
Connection Style Connection Style |
|---|
 | Threaded |
Connection Type Connection Type |
|---|
 | Pipe |
Actuation Time Actuation Time |
|---|
|
Number of Ports Number of Ports |
|---|
|
Duty Cycle Duty Cycle |
|---|
|
Valve Type Valve Type |
|---|
|
Actuator Housing Material Actuator Housing Material |
|---|
|
Wire Connection Type Wire Connection Type |
|---|
 | Wire Leads |
Body Material Body Material |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Actuator Length Actuator Length |
|---|
|
Actuator Width Actuator Width |
|---|
|
Connection Location Connection Location |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Actuated On/Off Valves
More
Threaded Solenoid Diverting Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Buna-N Rubber
These valves operate on electricity to automatically divert flow between ports. All can direct flow from the center-port inlet to either side-port outlet. Valves cannot shut off flow. They require a minimum pressure drop between the inlet and outlet for operation; the upstream pressure must be 10 psi greater than the downstream pressure. The actuator is directly mounted to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Each | |
Brass Body with Wire Leads—120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/2 | L-Pattern | 3.6 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 3 3/8" | 5 1/8" | 0000000 | 0000000 |
| 3/4 | L-Pattern | 7.3 | 180 psi @ 165° F | Pressure Drop Assisted | 10 psi | 35° to 165° | 0 sec. | 4 1/4" | 6 1/16" | 0000000 | 000000 |