Nylon or aluminum cores make these wheels lighter and more corrosion resistant than iron-core wheels without sacrificing capacity.

Made of TPE rubber, these wheels outlast standard rubber wheels with better resistance to water, steam, and mild acids.

Also known as balloon tires, these have a rounded, cushioned tread for easy turning and good shock absorption.

These wheels have an iron core for greater capacities than other polyurethane wheels.

Replace worn or broken wheels on your equipment—these wheels are designed to fit specific models of pallet and lift trucks.

Solid polyurethane wheels offer a durable ride with no possibility of tread separation.

These wheels have a webbed tread that flexes to absorb shock and tapered roller bearings to withstand both downward and side force.

The thick, solid rubber or polyurethane foam treads provide the cushioned ride of an air-filled pneumatic wheel without the possibility of a flat tire.

The angled rollers on these wheels allow vehicles to move forward, backward, sideways, and turn in place. Often used on automated guided vehicles and in robotics.

The solid rubber wheels on these casters cushion as well as pneumatic wheels but won't go flat.

A shield on the swivel keeps out contaminants for extended service life.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

The lightweight wheels on these casters are easy to get rolling.

Forged steel construction gives these casters the strength for demanding applications.

Mount these casters to the corners of carts, equipment, and angle iron.

Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.

Both the wheel bearings and the swivel bearings are protected to lengthen the life of these casters.

Thicker frames, larger mounting plates, and a heavy duty swivel design make these casters more durable than other casters in their capacity range.

Minimize shock to your load on bumpy surfaces with these spring-loaded casters.

Chrome or zinc plating gives these casters a bright, clean finish.

These economical casters are designed for moderately heavy loads.

Metal wheel guards keep dust and debris from restricting motion.

More durable than other casters in their capacity range, these withstand the stress of sudden impact.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

Made from a special blend of rubber, the wheels on these casters roll easily over smooth and rough surfaces.

A shield on the swivel keeps out contaminants for extended service life.

The steel frame has a black powder-coated finish to blend in with your equipment.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Their 304 stainless steel frame is corrosion resistant.

With a 304 stainless steel frame for good corrosion resistance, these casters are an economical alternative to washdown casters. Wheels range from soft rubber that absorbs shock and sound while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

Forged steel construction holds up in demanding applications.

Not only do these casters offer some of the highest capacities, they also withstand the stress of sudden impact.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

These highly maneuverable casters let you start rolling quickly and turn easily.

The wheels on these casters are made of a special rubber that is impact and chemical resistant and absorbs shock for smooth rolling over rough surfaces. They have a stainless steel frame and sealed bearings for corrosion resistance.

The wheels on these casters are a special blend of soft rubber that start to roll easily.

A thick rubber tread on iron wheels absorbs shock to protect your load.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.

These highly maneuverable casters let you turn easily.

With some of the highest capacities in their capacity range, these casters have a kingpinless swivel design for impact resistance and smooth swiveling.

These are good general purpose casters designed for heavy loads.

These economical casters are designed for moderately heavy loads.

Double-ball bearings and kingpinless swivel raceways offer better weight distribution and smooth swiveling.

Treads are treated to protect the wheels from degradation. They meet NSF/ANSI 2 for food equipment use.

A stainless steel frame and rust resistant bearings gives these casters good corrosion resistance. Their polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Use them on smooth or rough floors and in areas with debris.

Also known as twin‐wheel casters, these lightweight and economical casters are commonly found on furniture and displays.

Soft rubber wheels are shock absorbing and provide good traction on rough surfaces. They also dissipate static to protect sensitive electronic equipment from electrostatic discharge.

Wheels range from soft rubber that absorbs shock while providing good traction on rough surfaces, to hard, impact‐resistant rubber that rolls easily on smooth surfaces.

Press-fit these casters into sockets on Rubbermaid carts with a 7/16" Tube OD.

Use these general purpose casters in a variety of applications.

Customize the length of your stem by adding any 1/2" dia. Grade 8 bolt through the unthreaded hole in the frame.

Also known as twin-wheel casters, these lightweight casters are often used on furniture and displays.

Rubber wheels on these casters dissipate static to protect static sensitive electronic equipment from electrostatic discharge.

A nylon frame gives these casters the corrosion resistance you need for equipment that’s frequently washed down. Their soft rubber wheels are shock absorbing and provide good traction on rough surfaces.

The soft rubber wheels are quiet, shock absorbing, and provide good traction on rough surfaces. Their 304 stainless steel frame is corrosion resistant.

The stem on these casters fits into square tubing and can also be bolted to angle iron.

The 90° angle bracket mounts into square tubing and can also be bolted to angle iron.

Use screws or bolts to attach the mounting plate on these casters to a flat surface. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

In addition to holding round drums, most of these dollies also support square cartons and crates.

The casters on these dollies are mounted outside the platform for increased stability.

Store and transport these dollies in a stack up to 35 dollies high.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.