For strong bonds, clean and degrease surfaces before applying adhesives.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Spray these abrasion- and wear-resistant coatings on motor winding wire, transformers, and other metal electrical parts to protect them from oils, chemicals, and moisture.

Inhibit the growth of bacteria and fungi in your machine-tool reservoir to improve coolant effectiveness and eliminate the cause of foul odors.

Remove rust, dirt, and varnish from air-powered equipment to keep it running longer.

Form a protective barrier that makes surfaces impregnable to corrosion-causing acid fumes.

Avoid downtime and material waste by quickly purging colors, resins, and carbon build-up from injection molding, blow molding, and plastic extrusion machines. These machine cleaners are also known as purging compounds.

Wipe oils, dust, and other particles off sensitive optical devices such as lenses, mirrors, solar cells, laser hardware, and scientific instruments.

Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

Remove asphalt, top coatings, and sealers from tools and equipment.

These adhesive removers are safe, easy to use, and virtually odorless. They evaporate slowly, allowing them to work for up to 24 hours.

More effective than water-based degreasers, these solvent-based degreasers cut through the toughest grease and oils.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls.

Often used on equipment in the mining, oil, and gas industries, these citrus-based solvents remove carbon black, crude oil, tar, asphalt, and grease.

These sanitizers are made from sterile denatured ethanol and can be used in clean rooms. The containers come double bagged.

Eliminate static buildup to protect electronic equipment from damage caused by static discharge.

Wash away dirt, salt, and insects on vehicle windshields for a streak-free shine.

Remove galvanization buildup from surfaces and equipment, such as punch presses and sheet metal benders.

Remove excess ink from applicators and rubber stamps after use.

Clean and restore shine to stainless steel surfaces. These cleaners leave a finish that resists dirt, oil, and water spots.

Be prepared for a variety of chemical spills at your worksite.

Unlike other solvent-based parts washing solutions, these won't leave anything behind.

The cleaning solution is stored inside a drum to reduce fumes and solvent evaporation.

Sized for a benchtop, these washers are good for cleaning small parts.

Easily insert and remove parts from these cans.

Avoid the fumes and strong smell of traditional thinners with these odorless thinners. They’re often used for cleanup and to thin paint for spray applications.

Dilute thick epoxies so they're thin enough to spray. These thinners evaporate quickly enough that sprayed coatings won't sag, but slowly enough that they still bond well.

These thinners are acetone and naphtha based, so they're low odor. They're often used for cleanup and to thin paint for spray applications.