More effective than water-based degreasers, these solvent-based degreasers cut through the toughest grease and oils.

Use these nonflammable solvents in vapor degreasing systems to ensure precision parts are clean and residue free.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls.

Quickly dissolve and remove most adhesive residue.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

Less aggressive than our standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection.

Inhibit the growth of bacteria and fungi in your machine-tool reservoir to improve coolant effectiveness and eliminate the cause of foul odors.

Neutralize acid and clean away corrosion.

Stop corrosion caused by battery acid fumes leaking at the posts of battery terminals.

Avoid downtime and material waste by quickly purging colors, resins, and carbon build-up from injection molding, blow molding, and plastic extrusion machines. These machine cleaners are also known as purging compounds.

Clean dirt, grease, oil, tar, and wax from fiber-optic cables before splicing them together.

Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.

Designed for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged.

Clean and restore shine to stainless steel surfaces. These cleaners leave a finish that resists dirt, oil, and water spots.

Remove graffiti, paint, and varnish from most surfaces.

Clean fingerprints, uncured epoxy residue, flux, and light oils off printed circuit boards and electronic connectors.

Wash away dirt, salt, and insects on vehicle windshields for a streak-free shine.

An economical alternative to deodorizing fog machines, these foggers make it easy to kill odors in rooms, vehicles, and other enclosed spaces.

Disinfect and deodorize enclosed spaces without coming into contact with potentially harmful chemicals. These broad-spectrum disinfectants kill bacteria and viruses while eliminating unpleasant odors, and the microorganisms that cause them.

The tips of these swabs are soaked with isopropyl alcohol.

Unlike other solvent-based parts washing solutions, these won't leave anything behind.

Dilute thick epoxies so they're thin enough to spray. These thinners evaporate quickly enough that sprayed coatings won't sag, but slowly enough that they still bond well.

These thinners are often used for cleanup and to thin paint for spray applications.

These thinners are often used for cleanup and to thin paint for spray applications.

Apply remover to debond sealant from surfaces and clean it off of work areas and tools.