Debond and remove epoxy adhesives from parts, tools, and work areas.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Cleaners that are NSF registered K2 or NSF registered P1 can be used in food-processing environments.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Cleaners provide long-lasting protection for all metal surfaces. Sealants for metal surfaces protect electrical contacts and connections in high humidity, corrosive, and salty environments. Sealants for gold surfaces improve conductivity and provide lasting protection.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax. These cleaners are NSF registered K2 for use in food-processing environments.

Spray these abrasion- and wear-resistant coatings on motor winding wire, transformers, and other metal electrical parts to protect them from oils, chemicals, and moisture. They are solvent based, so they dry quickly. Choose a varnish with a dielectric strength that’s greater than the voltage of the electrical equipment it protects.

Clear varnish leaves a transparent film so components can be inspected. Red and green varnish stand out for identification when used to coat wire.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Sprays with hydrofluoroolefin gas propellant are less harmful to the environment than sprays with hydrofluorocarbon gas propellant.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

The compound is easy to apply with the included brush.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents. Stem is male.

Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection. These solvent-based removers are safe to use on cable insulation and components, metals, and most plastics. All rinse clean with water.

Wipes come ready to use. Simply wipe them on your cables.

Use a brush or saturate a cloth to apply liquids to your cables.

Wipe oils, dust, and other particles off sensitive optical devices such as lenses, mirrors, solar cells, laser hardware, and scientific instruments. Kits come with 3 oz. of cleaning fluid and 100 lint-free wipes. Fluid is solvent based, so it dries quickly and won’t leave a residue. Wipes eliminate static cling to help prevent dust and dirt buildup after cleaning.

These sanitizers are made from sterile denatured ethanol and can be used in clean rooms. The containers come double bagged.

Disinfect and deodorize enclosed spaces without coming into contact with potentially harmful chemicals. These broad-spectrum disinfectants kill bacteria and viruses while eliminating unpleasant odors, and the microorganisms that cause them. They’re EPA registered for safety and effectiveness. They don’t contain CFCs (chlorofluorocarbons), which are known to deplete the ozone layer.

Press the valve button down and lock it in place to release a continuous spray for fogging rooms in schools, nursing homes, hotels, laboratories, and offices. Make sure to keep these foggers away from heat, sparks, open flames, hot surfaces, and ignition sources. Leave the room and keep it closed for 2 hours while it’s being fogged. After treatment, air out the room for 30 minutes. One 6-oz. can treats a 6,000 cu. ft. space, which equals a 25’ Lg.×24’ Wd.×10’ Ht. room.

Press and release the valve button to use these foggers as intermittent cleaners. They’re good for disinfecting a variety of surfaces, such as counters, handles, lockers, toilets, and showers.

Designed for use in Class 100 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged. They are also NSF registered A7 for use in food-processing environments as long as they do not contact food.

Clean, polish, and protect aluminum, brass, copper, chrome, and stainless steel with this polish. It removes oxidation, tarnish, and surface rust without scratching or dulling brushed finishes.

Polish that cannot be sold to the regions listed are restricted by product labeling requirements.