Use these nonflammable solvents in vapor degreasing systems to ensure precision parts are clean and residue free. With a high solvent strength, they are more effective yet less hazardous than other vapor degreasing solvents, such as nPB, PERC, and TCE. They also evaporate quickly, allowing parts to be used shortly after cleaning.

These solvent-based degreasers contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox, from parts and fittings. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. They also evaporate quickly, allowing parts to be used shortly after cleaning.

Often used to clean lubricants off compressed gas equipment and fittings, these solvent-based degreasers have a contaminant concentration below 1 ppm to ensure no residue or particles are left behind that can hinder the operation of valves, sensors, and controls. They contain Vertrel™ to remove long-lasting lubricants, such as DuPont/Chemours Krytox. They are nonflammable and less hazardous than other solvents that remove lubricants, such as nPB, PERC, and TCE. Use these degreasers as the primary cleaner or as a final rinse to ensure parts are completely clean. They evaporate quickly, allowing parts to be used shortly after cleaning.

Debond and remove epoxy adhesives from parts, tools, and work areas.

Brush on this solution to debond and remove instant-bond adhesives.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Gels cling to vertical surfaces to remove residue more effectively than liquids.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

Less aggressive than our standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste. They are often used to wipe excess epoxy and paste off printed circuit boards and other electronic components.

Keep electric motors and generators working efficiently by removing dirt, grease/oil, gum, and wax. These cleaners are NSF registered K2 for use in food-processing environments.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards. Product regulations restrict sales to the listed jurisdictions/areas.

Cleaners that are NSF registered K2 or NSF registered P1 can be used in food-processing environments.

Aerosol cans with a flip-up straw have a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense cleaner as a spray.

Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables. Product regulations restrict sales to the listed jurisdictions/areas.

Cleaners that are NSF registered K2 can be used in food-processing environments.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Cleaners provide long-lasting protection for all metal surfaces. Sealants for metal surfaces protect electrical contacts and connections in high humidity, corrosive, and salty environments. Sealants for gold surfaces improve conductivity and provide lasting protection.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time. Product regulations restrict sales to the listed jurisdictions/areas.

Sprays with hydrofluoroolefin gas propellant are less harmful to the environment than sprays with hydrofluorocarbon gas propellant.

Apply to electrical connections such as switches and lugs to prevent corrosion, enhance conductivity, and suppress arcing. These inhibitors protect and lubricate the connection while sealing out liquids and gases.

The compound is easy to apply with the included brush.

Clean dirt, gum, and varnish off carburetors, heat valves, and automatic chokes with this solvent-based formula. Cleaners cannot be sold outside the United States due to product labeling requirements.

Note: Use on metal surfaces only.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents. Stem is male.

Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection. These solvent-based removers are safe to use on cable insulation and components, metals, and most plastics. All rinse clean with water.

Wipes come ready to use. Simply wipe them on your cables.

Use a brush or saturate a cloth to apply liquids to your cables.

For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ACTIVITY after your order ships.

Designed for use in Fed. Spec. Class 100 and ISO Class 5 clean rooms, these cleaners won't leave a residue that could attract contaminants. They come sterilized and double bagged. They are also NSF registered A7 for use in food-processing environments as long as they do not contact food.

Clean fingerprints, uncured epoxy residue, flux, and light oils off printed circuit boards and electronic connectors. These saturated wipes won’t leave behind residue.