Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Gels cling to vertical surfaces to remove residue more effectively than liquids.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

Debond and remove epoxy adhesives from parts, tools, and work areas.

Less aggressive than our standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste. They are often used to wipe excess epoxy and paste off printed circuit boards and other electronic components.

Eliminate dirt, oil, and grease buildup in electrical equipment such as relays, switches, and cables.

Cleaners that are NSF registered K2 can be used in food-processing environments.

Less harsh than general purpose electrical cleaners, these cleaners are suitable for the delicate contacts in electronics and printed circuit boards.

Cleaners that are NSF registered K2 or NSF registered P1 can be used in food-processing environments.

Aerosol cans with a flip-up straw have a straw that’s attached to the nozzle, so it won’t get lost. Raise it for precision dispensing; lower it for storage or to dispense cleaner as a spray.

Cleaners that cannot be sold to the regions listed are restricted by local chemical regulations, and/or by product labeling requirements.

Designed to be used together to improve the performance of electrical connections, cleaners remove oxidation and corrosion on connections while sealants coat them to prevent oxidation and corrosion.

Cleaners provide long-lasting protection for all metal surfaces. Sealants for metal surfaces protect electrical contacts and connections in high humidity, corrosive, and salty environments. Sealants for gold surfaces improve conductivity and provide lasting protection.

Chill individual electronic components on a circuit board to troubleshoot one circuit at a time.

Sprays with hydrofluoroolefin gas propellant are less harmful to the environment than sprays with hydrofluorocarbon gas propellant.

Spray on all types of metal molds to eliminate moisture, dirt, oils, and release agents. Stem is male.

Remove gels, blocking and filling compounds, dirt, grease, oil, tar, and wax often found in or on outdoor telecommunications cables before splicing them together to make a reliable connection. These solvent-based removers are safe to use on cable insulation and components, metals, and most plastics. All rinse clean with water.

Wipes come ready to use. Simply wipe them on your cables.

Use a brush or saturate a cloth to apply liquids to your cables.

Wipe oils, dust, and other particles off sensitive optical devices such as lenses, mirrors, solar cells, laser hardware, and scientific instruments. Kits come with 3 oz. of cleaning fluid and 100 lint-free wipes. Fluid is solvent based, so it dries quickly and won’t leave a residue. Wipes eliminate static cling to help prevent dust and dirt buildup after cleaning.

For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.

Use these cleaners on PVC, CPVC, and ABS pipe to remove dirt and degrease surfaces.

These sanitizers are made from sterile denatured ethanol and can be used in clean rooms. The containers come double bagged.

Disinfect and deodorize enclosed spaces without coming into contact with potentially harmful chemicals. These broad-spectrum disinfectants kill bacteria and viruses while eliminating unpleasant odors, and the microorganisms that cause them. They’re EPA registered for safety and effectiveness. They don’t contain CFCs (chlorofluorocarbons), which are known to deplete the ozone layer.

Press the valve button down and lock it in place to release a continuous spray for fogging rooms in schools, nursing homes, hotels, laboratories, and offices. Make sure to keep these foggers away from heat, sparks, open flames, hot surfaces, and ignition sources. Leave the room and keep it closed for 2 hours while it’s being fogged. After treatment, air out the room for 30 minutes. One 6-oz. can treats a 6,000 cu. ft. space, which equals a 25’ Lg.×24’ Wd.×10’ Ht. room.

Press and release the valve button to use these foggers as intermittent cleaners. They’re good for disinfecting a variety of surfaces, such as counters, handles, lockers, toilets, and showers.

Clean fingerprints, uncured epoxy residue, flux, and light oils off printed circuit boards and electronic connectors. These saturated wipes won’t leave behind residue.

Eliminate static buildup to protect electronic equipment from damage caused by static discharge. These neutralizers also help prevent dust and dirt buildup on equipment.

Neutralizers that are NSF registered P1 can be used in food-processing environments.