Container Type Container Type |
|---|
 |  |
| Bottle | Pail |
 | |
| Spray Bottle |
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Container Material Container Material |
|---|
|
Cleaner Type Cleaner Type |
|---|
|
Composition Composition |
|---|
|
Primary Chemical Primary Chemical |
|---|
|
Form Form |
|---|
|
Color Color |
|---|
 | Amber |
Viscosity Viscosity |
|---|
|
Type Type |
|---|
|
Smoothing and Polishing Solvents for 3D-Printed Plastics
Remove ridges from 3D-printed plastic pieces and give them a polished finish. Dip your piece in solvents for less than a minute, or use them in vapor smoothing systems. Unlike alternatives such as isopropyl alcohol and acetone, these solvents are non-flammable. Compared to grinding, sanding, and buffing, these solvents produce a smoother part with less time and effort.
Container | |||||||
|---|---|---|---|---|---|---|---|
| Size | Type | Material | Form | For Use On | Mixing Required | Each | |
| 16 oz. | Bottle | Glass | Liquid | ABS Plastic, Polycarbonate Plastic, Polyethylene Plastic, Polypropylene Plastic | No | 0000000 | 000000 |
| 1 gal. | Pail | Stainless Steel | Liquid | ABS Plastic, Polycarbonate Plastic, Polyethylene Plastic, Polypropylene Plastic | No | 0000000 | 000000 |
| 5 gal. | Pail | Stainless Steel | Liquid | ABS Plastic, Polycarbonate Plastic, Polyethylene Plastic, Polypropylene Plastic | No | 0000000 | 000000 |
Thin Film and Label Application Primers
Spray these primers onto a mounting surface to quickly and smoothly apply signs, labels, and protective films. These primers float adhesive-backed sheets above a surface until you press them down, giving you time to position the sheet and remove any wrinkles. Since the sheet doesn’t stick right away, you can apply large sheets without needing a second pair of hands. These primers also work with non-adhesive films. Even in hot or cold temperatures, your sheet will stay put.
Clean the mounting surface with primer before applying a film, so no residue is trapped underneath. Use a smoothing tool (sold separately) to squeeze out air bubbles and excess fluid. Drying time depends on application—most decals and films will dry within 90 seconds, but 3D printer sheets should dry for 24 hours before printing.