Made of melamine foam, these sheets meet UL 94 V-0 for flame retardance and ASTM E84 5/20 for flame and smoke. Use them to quiet noisy areas and line machine enclosures. Sheets are peaked on one side for more sound-absorbing area than flat-surface sheets.

Furnished with two hangers for easy mounting around your facility, these sheets quiet noisy areas. Made of melamine foam, they are peaked on both sides for good sound absorption in large open spaces.

Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam and have a smooth, easy-to-clean facing on both sides.

This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

A urethane coating protects these humidity-resistant polyurethane foam sheets from oil exposure. Use them to quiet noisy areas and line machine enclosures.

Hang these nylon-covered fiberglass cylinders in areas with high ceilings to absorb sound from all directions. Each cylinder is equivalent to 10 to 15 sq. ft. of acoustical ceiling tiles.

Set up these free-standing partitions to reflect sound and block noise from traveling to other parts of your facility. A vinyl barrier is sandwiched between two vinyl-coated fiberglass absorbers.

Apply these coatings to irregular shapes and large areas and reduce noise caused by vibration. Keep applying coats until desired noise reduction is achieved.

A small hex size makes these high-flow mufflers a great fit for cramped spaces.

With a threaded connection on both ends, these mufflers can be installed anywhere in your line.

In addition to a filter, these mufflers have a wool felt disc to trap oil mist.

Use these mufflers with air-powered tools, valves, and cylinders to reduce noise and filter exhaust fumes.

Also known as reclassifiers, these mufflers have a clear reservoir with a drain plug to remove and store oil mist for reuse.

Replace your muffler less often—these have a filter design that stays clean longer than porous mufflers.

Suitable for use with welding equipment, these mufflers are made of flame-resistant materials. They reduce noise by 35-42 dB.

Made of polypropylene, these filters can be used in damp environments where corrosion is a concern.

Stop dust and other contaminants from entering your process and equipment. Use these filters on blowers, compressors, engines, and in hydraulic systems.

Stay connected while protecting one or two of your ears in noisy locations. Both of these earmuffs let you listen to music or make phone calls using a Bluetooth-enabled smartphone up to 30 or 300 feet away.

Earmuffs should be worn with the specified fit to offer proper protection and noise reduction.

Snap these earmuffs on and off your slotted hard hat.

Keep earplugs accessible and ready to use.

The dispenser is sealed to keep plugs sanitary. It dispenses one pair at a time and is disposable when empty.

Good for food preparation areas, these earplugs have an enclosed ball bearing that can be sensed by metal detectors.

Soft plastic earplugs add hearing protection to your safety sunglasses. The curved design of the glasses sits close to your face for better protection from debris.

IP rated for dusty and damp environments, these connectors bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Make hands-free calls from your computer, smartphone, or other device. These headsets have a noise-canceling microphone that filters out background noise while you speak.

For extremely loud environments, these headsets have noise-canceling ear muffs and an adjustable-volume microphone.