McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    127 Products

    Extreme-Vibration-Resistant Wedge Lock Washers

    When it's critical to keep bolted assemblies secure, choose these two-piece lock washers with the tightest grip of all. They stop nuts and screws from loosening in heavy machinery that experiences jarring starts and stops, such as compressors and compactors. Serrations on the outside bite into the fastener and mating surfaces, while wedges on the inside lock the two pieces together. When the nut or screw starts to loosen, the wedges drive more tightly together to maintain tension. You can reuse these washers up to fifteen times, as long as the serrations and wedges are not worn down. They are comparable to NORD-LOCK® or Sherex TEC® washers.
    Wedge Lock
    Image of Product. Bottom orientation. Lock Washers. Wedge-Lock Washer.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.
    Black Super-Corrosion-Resistant Zinc-Flake-Coated Steel—Typically chosen for their appearance, these washers have a dark, matte coating to create a finished look. With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. Similar to Magni-coated washers.
    For Screw
    Size
    ID
    OD
    Thk.
    Pkg.
    Qty.
    Pkg.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    No. 5, M3
    0.130"0.280"0.060" to 0.080"2091074A112000000
    No. 6, M3.5
    0.150"0.300"0.060" to 0.080"2091074A10200000
    No. 6, M3.5
    0.150"0.350"0.060" to 0.080"2091074A14200000
    No. 8, M4
    0.170"0.300"0.060" to 0.080"2091074A11500000
    No. 8, M4
    0.170"0.350"0.060" to 0.080"2091074A31200000
    No. 10, M5
    0.210"0.350"0.060" to 0.080"2091074A12700000
    No. 10, M5
    0.210"0.430"0.060" to 0.080"2091074A32700000
    1/4"
    0.280"0.450"0.090" to 0.110"2091074A12900000
    1/4"
    0.280"0.530"0.090" to 0.110"2091074A32900000
    5/16", M8
    0.340"0.530"0.090" to 0.110"2091074A13000000
    5/16", M8
    0.340"0.650"0.090" to 0.110"2091074A33000000
    3/8"
    0.410"0.650"0.090" to 0.110"2091074A13100000
    3/8"
    0.410"0.830"0.090" to 0.110"1091074A33100000
    7/16", M11
    0.450"0.730"0.090" to 0.110"1091074A13200000
    1/2"
    0.530"0.770"0.090" to 0.110"1091074A13300000
    1/2"
    0.530"1.000"0.120" to 0.140"891074A33300000
    9/16", M14
    0.600"0.910"0.120" to 0.140"1091074A13400000
    9/16", M14
    0.600"1.210"0.120" to 0.140"491074A30500000
    5/8", M16
    0.670"1.000"0.120" to 0.140"891074A13500000
    5/8", M16
    0.670"1.210"0.120" to 0.140"491074A33500000
    3/4"
    0.790"1.210"0.120" to 0.140"491074A13600000
    3/4"
    0.790"1.540"0.120" to 0.140"291074A33600000
    7/8", M22
    0.920"1.360"0.120" to 0.140"291074A1370000
    7/8", M22
    0.920"1.650"0.170" to 0.190"291074A33700000
    1"
    1.100"1.540"0.120" to 0.140"291074A13800000
    1"
    1.100"1.910"0.170" to 0.190"191074A3380000
    1 1/8", M30
    1.240"1.850"0.220" to 0.240"191074A1400000
    1 1/8", M30
    1.240"2.300"0.250" to 0.270"191074A36000000
    1 1/4", M33
    1.350"1.910"0.220" to 0.240"191074A14500000
    1 3/8", M36
    1.470"2.170"0.250" to 0.270"191074A15000000
    1 1/2", M39
    1.590"2.300"0.250" to 0.270"191074A16000000
    1 3/4", M45
    1.820"2.760"0.270" to 0.290"191074A36700000
    1 7/8", M48
    1.950"2.950"0.270" to 0.290"191074A37000000
    2", M52
    2.110"3.150"0.270" to 0.290"191074A37100000
    2 1/4", M56
    2.330"3.350"0.270" to 0.290"191074A37400000
    2 1/2", M64
    2.640"3.740"0.270" to 0.290"191074A37800000
    M6
    0.260"0.430"0.060" to 0.080"2091074A15100000
    M6
    0.260"0.530"0.090" to 0.110"2091074A16900000
    M10
    0.420"0.650"0.090" to 0.110"2091074A18000000
    M10
    0.420"0.830"0.090" to 0.110"1091074A21100000
    M12
    0.510"0.770"0.090" to 0.110"1091074A22100000
    M12
    0.510"1.000"0.120" to 0.140"891074A28900000
    M18
    0.770"1.140"0.120" to 0.140"491074A30800000
    M18
    0.770"1.360"0.120" to 0.140"291074A3140000
    M20
    0.840"1.210"0.120" to 0.140"491074A32500000
    M20
    0.840"1.540"0.120" to 0.140"291074A32800000
    M24
    1.000"1.540"0.120" to 0.140"291074A34800000
    M24
    1.000"1.910"0.170" to 0.190"291074A35300000
    M27
    1.120"1.650"0.220" to 0.240"191074A3540000
    M27
    1.120"1.910"0.220" to 0.240"191074A35500000
    M42
    1.700"2.480"0.250" to 0.270"191074A36600000
     
    Black Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    1/4"
    0.280"0.450"0.090" to 0.110"1097913A1120000
    1/4"
    0.280"0.530"0.090" to 0.110"1097913A1230000
    5/16", M8
    0.340"0.530"0.090" to 0.110"1097913A11300000
    3/8"
    0.410"0.650"0.090" to 0.110"1097913A11400000
    3/8"
    0.410"0.830"0.090" to 0.110"597913A1250000
    1/2"
    0.530"0.770"0.090" to 0.110"597913A1170000
    1/2"
    0.530"1.000"0.120" to 0.140"497913A12800000
    5/8", M16
    0.670"1.000"0.120" to 0.140"497913A11800000
    3/4"
    0.790"1.210"0.120" to 0.140"497913A11900000
    3/4"
    0.790"1.540"0.120" to 0.140"297913A1310000
    1"
    1.100"1.540"0.120" to 0.140"297913A1210000
    M6
    0.260"0.430"0.060" to 0.080"1097913A11100000
    M6
    0.260"0.530"0.090" to 0.110"1097913A1220000
    M8
    0.340"0.650"0.090" to 0.110"1097913A12400000
    M10
    0.420"0.650"0.090" to 0.110"1097913A11500000
    M10
    0.420"0.830"0.090" to 0.110"597913A1260000
    M12
    0.510"0.770"0.090" to 0.110"597913A1160000
    M12
    0.510"1.000"0.120" to 0.140"497913A12700000
    M16
    0.670"1.210"0.120" to 0.140"497913A12900000
     
    Spring/Wedge Lock
    Image of Product. Bottom orientation. Lock Washers. Wedge-Lock Washer.
    More flexible than standard wedge lock washers to withstand stronger shocks and vibration. They have a cone shape that expands and compresses to maintain tension in the joint, similar to a heavy duty spring.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.
    For Screw
    Size
    ID
    OD
    Thk.
    Pkg.
    Qty.
    Pkg.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    5/16", M8
    0.340"0.530"0.080" to 0.090"193281A10300000
    5/16", M8
    0.340"0.650"0.080" to 0.090"193281A1130000
    3/8"
    0.410"0.650"0.090" to 0.100"193281A1040000
    1/2"
    0.530"0.770"0.130" to 0.140"193281A1070000
    5/8", M16
    0.670"1.000"0.170" to 0.180"193281A1090000
    3/4"
    0.790"1.210"0.210" to 0.220"193281A1140000
    M6
    0.260"0.430"0.070" to 0.080"193281A1010000
    M10
    0.420"0.650"0.100" to 0.110"193281A1050000
    M12
    0.510"0.770"0.13"193281A1060000
    M20
    0.840"1.210"0.220" to 0.230"193281A1120000
     

    SAE Washers

    Originally designed for the automotive industry, these washers conform to SAE sizing standards. They generally have smaller diameters than USS washers to fit in cramped spots and are thinner to create more precise gaps. Washers distribute pressure under screws and nuts to protect your mounting surface.
    Steel
    Image of Product. Front orientation. Washers. SAE Washers.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.
    For Fastener Strength Grade/Class—If you require screws or nuts with a specific fastener strength rating, make sure your washer matches the grade or class.
    For Screw
    Size
    ID
    OD
    Thk.
    For Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    No. 6
    0.158"0.380"0.036" to 0.065"SAE Grade 8
    ASME B18.21.11098180A18000000
    No. 8
    0.190"0.443"0.036" to 0.065"SAE Grade 8
    ASME B18.21.11098180A1900000
    No. 10
    0.221"0.505"0.036" to 0.065"SAE Grade 8
    ASME B18.21.11098180A2100000
    1/4"
    0.281"0.625"0.055" to 0.065"SAE Grade 8
    ASME B18.22.110098180A11000000
    5/16"
    0.344"0.688"0.055" to 0.065"SAE Grade 8
    ASME B18.22.15098180A1200000
    3/8"
    0.406"0.812"0.055" to 0.065"SAE Grade 8
    ASME B18.22.15098180A1300000
    7/16"
    0.469"0.922"0.055" to 0.065"SAE Grade 8
    ASME B18.22.12598180A1400000
    1/2"
    0.531"1.062"0.097" to 0.177"SAE Grade 8
    ASME B18.22.12598180A15000000
    9/16"
    0.599"1.168"0.074" to 0.121"SAE Grade 8
    ASME B18.21.1598180A2200000
    5/8"
    0.688"1.312"0.122" to 0.177"SAE Grade 8
    ASME B18.22.12598180A16000000
    3/4"
    0.812"1.469"0.122" to 0.177"SAE Grade 8
    ASME B18.22.12098180A17000000
    7/8"
    0.950"1.762"0.108" to 0.160"SAE Grade 8
    ASME B18.21.1198180A2300000
    1"
    1.074"2.012"0.108" to 0.160"SAE Grade 8
    ASME B18.21.1198180A2400000
    1 1/8"
    1.262"2.243"0.108" to 0.160"SAE Grade 8
    ASME B18.21.1198180A2500000
    1 1/4"
    1.387"2.512"0.136" to 0.192"SAE Grade 8
    ASME B18.21.1198180A2600000
    1 1/2"
    1.637"3.012"0.136" to 0.192"SAE Grade 8
    ASME B18.21.1198180A2700000
     

    General Purpose Washers

    Your go-to metal washer for every screw size. Washers take the pressure off nuts and screws to protect mounting surfaces.
    Steel
    Image of Product. Front orientation. Washers. General Purpose Washers.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.
    For Fastener Strength Grade/Class—If you require screws or nuts with a specific fastener strength rating, make sure your washer matches the grade or class.
    For Screw
    Size
    ID,
    mm
    OD,
    mm
    Thk., mm
    For Fastener Strength
    Grade/Class
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    M4
    4.39.00.7 to 0.9ISO Class 8.8
    DIN 125, ISO 70895091455A41000000
    M5
    5.310.00.9 to 1.1ISO Class 8.8
    DIN 125, ISO 70895091455A4200000
    M6
    6.412.01.4 to 1.8ISO Class 8.8
    DIN 125, ISO 70895091455A4300000
    M6
    6.412.01.4 to 1.8ISO Class 10.9
    DIN 125, ISO 708910090486A1010000
    M8
    8.416.01.4 to 1.8ISO Class 8.8
    DIN 125, ISO 70895091455A44000000
    M8
    8.416.01.4 to 1.8ISO Class 10.9
    DIN 125, ISO 708910090486A1020000
    M10
    10.520.01.8 to 2.2ISO Class 8.8
    DIN 125, ISO 70892591455A45000000
    M10
    10.520.01.8 to 2.2ISO Class 10.9
    DIN 125, ISO 708910090486A1030000
    M12
    13.024.02.3 to 2.7ISO Class 8.8
    DIN 125, ISO 70891091455A4600000
    M12
    13.024.02.3 to 2.7ISO Class 10.9
    DIN 125, ISO 708910090486A10400000
    M14
    15.028.02.3 to 2.7ISO Class 8.8
    DIN 125, ISO 70891091455A47000000
    M16
    17.030.02.7 to 3.3ISO Class 8.8
    DIN 125, ISO 70891091455A48000000
    M18
    19.034.02.7 to 3.3ISO Class 8.8
    DIN 125, ISO 7089591455A49000000
    M20
    21.037.02.7 to 3.3ISO Class 8.8
    DIN 125, ISO 7089591455A51000000
    M24
    25.044.03.7 to 4.3ISO Class 8.8
    DIN 125, ISO 7089191455A5200000
    M30
    31.056.03.7 to 4.3ISO Class 8.8
    DIN 125, ISO 7089191455A53000000
     

    Split Lock Washers

    Image of Product. Front orientation. Lock Washers. Split-Lock Washer.
    Stop nuts and screws from loosening due to mild vibration. As you tighten, the uneven ends bite into the nut or screw so it won't back out. While they're not as vibration resistant as other lock washers, they are a great fit for electrical panels, light fixtures, and other light duty assemblies. Split lock washers are not reusable, and they only work with fasteners that have right-hand threads.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel—With 40 times the corrosion resistance of zinc-plated steel, these withstand rust as well as 316 stainless steel. They have been tested to extreme standards, including 1,000 hours of salt spray. They are similar to Magni-coated washers.
    For Screw
    Size
    ID
    OD
    Thk.
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Super-Corrosion-Resistant Zinc-Flake-Coated Steel
    No. 10
    0.200"0.334"0.047"ASME B18.21.1255185N15100000
    1/4"
    0.260"0.487"0.062"ASME B18.21.1255185N1280000
    5/16"
    0.322"0.583"0.078"ASME B18.21.1255185N1290000
    3/8"
    0.385"0.680"0.094"ASME B18.21.1105185N1310000
    7/16"
    0.450"0.776"0.109"ASME B18.21.1105185N1320000
    1/2"
    0.512"0.869"0.125"ASME B18.21.1105185N1330000
    9/16"
    0.574"0.965"0.141"ASME B18.21.155185N1340000
    5/8"
    0.641"1.073"0.156"ASME B18.21.155185N1350000
    3/4"
    0.766"1.265"0.188"ASME B18.21.115185N1360000
    7/8"
    0.894"1.459"0.219"ASME B18.21.115185N1370000
    1"
    1.024"1.656"0.250"ASME B18.21.115185N1380000
    1 1/4"
    1.280"2.036"0.312"ASME B18.21.115185N14100000
    M6
    6.5 mm11.8 mm1.5 mm to 1.7 mmDIN 127B2590491A1010000
    M8
    8.5 mm14.8 mm1.9 mm to 2.1 mmDIN 127B2590491A10200000
    M10
    10.7 mm18.1 mm2.0 mm to 2.4 mmDIN 127B2590491A10300000
     
    back to top