System of Measurement System of Measurement |
|---|
|
For Housing ID For Housing ID | Show |
|---|
|
For Housing ID For Housing ID | Hide |
|---|
Material Material |
|---|
|
Bearing Type Bearing Type |
|---|
 | Plain |
Lubrication Lubrication |
|---|
|
For Load Direction For Load Direction |
|---|
 |  |
| Radial | Combined Radial and Thrust |
Dynamic Radial Load Capacity Dynamic Radial Load Capacity |
|---|
|
Shaft Mount Type Shaft Mount Type |
|---|
| Slip Fit |
For Shaft Type For Shaft Type |
|---|
 | Round |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Lubrication Method Lubrication Method |
|---|
|
Lubricant Lubricant |
|---|
|
|
Dynamic Thrust Load Capacity Dynamic Thrust Load Capacity |
|---|
|
About Plain Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | ||||||
|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
| 13/16" | 5/8" | 115 lbs. @ 60 rpm | White | -10° to 220° | 000000 | 00000 |
MDS-Filled Nylon Bearings | ||||||
For 5/8" Shaft Dia. | ||||||
| 13/16" | 5/8" | 135 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
Acetal Bearings | ||||||
For 5/8" Shaft Dia. | ||||||
| 13/16" | 5/8" | 105 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 0000 |
High-Load Dry-Running Sleeve Bearings
with 17-4 PH Stainless
Steel Shell
A metal shell adds strength.
PTFE bearings with 17-4 PH stainless steel shell have the highest load capacity of any sleeve bearing we offer. They handle shock loads and are chemical resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings with 17-4 PH Stainless Steel Shell | ||||||
|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
| 13/16" | 5/8" | 9,500 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
| 13/16" | 1 1/4" | 19,050 lbs. @ 20 rpm | -60° to 320° | MIL-B-81820, MIL-B-81934, SAE AS81820, SAE AS81934 | 0000000 | 000000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
| 13/16" | 1/2" | 500 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 00000 |
| 13/16" | 3/4" | 750 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
| 13/16" | 1" | 1,000 lbs. @ 60 rpm | Embedded | -50° to 700° | 00000000 | 0000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
PTFE Plastic Bearings | ||||||
|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
| 13/16" | 5/8" | 39 lbs. @ 60 rpm | White | -350° to 500° | 0000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | |||||||
|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||
| 13/16" | 5/8" | 75 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/2" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 13/16" | 3/4" | 750 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 00000 |
| 13/16" | 1" | 2,000 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 1 1/2" | 1,500 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 9/16" Shaft Dia. | |||||||
| 13/16" | 3/4" | 820 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 1" | 1,100 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 1 1/4" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
For 5/8" Shaft Dia. | |||||||
| 13/16" | 1/2" | 620 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 5/8" | 780 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 7/8" | 1,050 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 13/16" | 1" | 1,250 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 1 1/4" | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 13/16" | 1 3/8" | 1,700 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 0000000 | 0000 |
| 13/16" | 1 1/2" | 1,850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 13/16" | 1 3/4" | 2,150 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 13/16" | 2" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 13/16" | 3" | 3,750 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 000000 | 00000 |
For 11/16" Shaft Dia. | |||||||
| 13/16" | 1" | 1,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 1 1/4" | 1,700 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 13/16" | 1/2" | 1,100 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
| 13/16" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 13/16" | 1" | 2,200 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
| 13/16" | 3" | 6,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 660 leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
660 Leaded Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||
| 13/16" | 1/2" | 1,250 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
| 13/16" | 3/4" | 1,850 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 13/16" | 1" | 2,500 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
| 13/16" | 3" | 7,500 lbs. @ 60 rpm | Required | -350° to 450° | 000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
| 13/16" | 5/8" | 1 1/16" | 5/32" | 115 lbs. @ 60 rpm | 100 lbs. @ 60 rpm | White | -20° to 250° | 00000000 | 00000 |
MDS-Filled Nylon Bearings | |||||||||
For 5/8" Shaft Dia. | |||||||||
| 13/16" | 5/8" | 1 1/16" | 5/32" | 135 lbs. @ 60 rpm | 115 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
Acetal Bearings | |||||||||
For 5/8" Shaft Dia. | |||||||||
| 13/16" | 5/8" | 1 1/16" | 5/32" | 105 lbs. @ 60 rpm | 90 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 0000 |
Easy-Install Dry-Running Flanged Sleeve Bearings
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
| 13/16" | 25/32" | 1 1/8" | 1/32" | 175 lbs. @ 20 rpm | 165 lbs. @ 20 rpm | White | -40° to 400° | 0000000 | 00000 |
| 13/16" | 1 5/32" | 1 1/8" | 1/32" | 260 lbs. @ 20 rpm | 165 lbs. @ 20 rpm | White | -40° to 400° | 0000000 | 0000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 13/16" | 5/8" | 1 1/16" | 5/32" | 75 lbs. @ 60 rpm | 65 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 13/16" | 5/8" | 1 1/16" | 5/32" | 39 lbs. @ 60 rpm | 34 lbs. @ 60 rpm | White | -350° to 500° | ASTM D1710, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 000000 |
Self-Aligning Dry-Running Flanged Sleeve Bearings
Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit. Mount them in injection-molded panels, thin sheet metal, and hard non-ductile material. Made of acetal, they won’t warp or swell when exposed to water, so they’re good for washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Shaft Diameter | For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Misalignment Capability | Color | Temperature Range, °F | Each | |
Acetal Plastic Bearings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/2" | 13/16" | 39/64" | 7/8" | 1/32" | 55 lbs. @ 120 rpm | 44 lbs. @ 120 rpm | 5° | Black | -40° to 180° | 0000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 13/16" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 13/16" | 3/4" | 1" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 13/16" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
| 13/16" | 1" | 1" | 1/8" | 1,250 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
| 13/16" | 1 1/4" | 1" | 1/8" | 1,550 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
| 13/16" | 1 1/2" | 1" | 1/8" | 1,850 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
Multipurpose Flanged Sleeve Bearings
These leaded bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 932 bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
660 Leaded Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
| 13/16" | 3/4" | 1" | 1/8" | 1,850 lbs. @ 60 rpm | 1,900 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |