Filter by
ID
Plain Bearing Type
For Housing ID
System of Measurement
Dynamic Radial Load Capacity @ Speed
For Load Direction
Lubrication
Bearing Type
Dynamic Thrust Load Capacity @ Speed
Shaft Type
Maximum Temperature
Performance
RoHS
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Oil-Embedded Sleeve Bearings
![]() |
Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in
electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t
afford the mess. All are fabricated, lubricated, and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
Extreme-Strength Heat-Treated Iron Copper—Our strongest oil-embedded sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Base Oil | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2" | 7,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K679 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 8,750 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K815 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 3" | 10,500 lb. @ 30 rpm | Mineral Oil | 10 to 220 | 6391K881 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 7/8" | 2 1/4" | 3/4" | 2,800 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K828 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 7/8" | 2 1/4" | 2" | 7,500 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K681 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 7/8" | 2 1/4" | 2 1/2" | 9,350 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K491 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 7/8" | 2 1/4" | 3" | 11,250 lb. @ 30 rpm | Mineral Oil | 10 to 220 | 6391K882 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 15/16" | 2 1/4" | 2" | 7,750 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K492 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1/2" | 2,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K829 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3/4" | 3,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K831 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1" | 4,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K684 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1 1/2" | 6,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K832 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 8,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K465 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 10,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K466 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3" | 12,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K833 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 4" | 16,000 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6391K28 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength 863 Iron Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 8,900 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2868T258 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 11,100 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2868T259 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 4" | 17,800 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2868T261 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Extreme-Strength Heat-Treated Iron Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1" | 9,500 lb. @ 30 rpm | Mineral Oil | 10 to 350 | 3741K48 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 19,050 lb. @ 30 rpm | Mineral Oil | 10 to 350 | 3741K49 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sleeve Bearings
![]() |
These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High-Strength 932 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 2 1/4" | 3" | 18,000 lb. @ 30 rpm | -350 to 450 | 6381K321 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 1 3/4" | 12,250 lb. @ 30 rpm | -350 to 450 | 6381K341 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 16,000 lb. @ 30 rpm | -350 to 450 | 6381K351 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 20,000 lb. @ 30 rpm | -350 to 450 | 6381K352 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 4" | 32,000 lb. @ 30 rpm | -350 to 450 | 6381K28 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength Chemical-Resistant 954 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1 1/2" | 13,500 lb. @ 30 rpm | -350 to 500 | 2867T243 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dry-Running Metal-Reinforced Plastic Flanged Sleeve Bearings
![]() |
Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
PTFE with Aluminum Shell—Made of a lightweight shell with corrosion resistance similar to stainless steel and a slippery PTFE inner sleeve.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PTFE with Aluminum Shell | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3" | 2 1/2" | 1/8" | 7,600 lb. @ 30 rpm | 1,800 lb. @ 30 rpm | -400 to 400 | 59575K81 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Flanged Sleeve Bearings
![]() |
These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High-Strength 932 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 17,500 lb. @ 30 rpm | 14,800 lb. @ 30 rpm | -350 to 450 | 7815K74 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3/4" | 2 1/2" | 1/8" | 6,000 lb. @ 30 rpm | 6,750 lb. @ 30 rpm | -350 to 450 | 7815K838 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1 1/4" | 3 1/2" | 1/8" | 10,000 lb. @ 30 rpm | 17,650 lb. @ 30 rpm | -350 to 450 | 7815K839 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 4 1/2" | 1/8" | 16,000 lb. @ 30 rpm | 27,050 lb. @ 30 rpm | -350 to 450 | 7815K84 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength Chemical-Resistant 954 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 19,650 lb. @ 30 rpm | 20,950 lb. @ 30 rpm | -350 to 500 | 2934T67 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dry-Running Metal-Reinforced Plastic Sleeve Bearings
![]() |
Combine slippery plastic with the strength of metal. The PTFE core is naturally slippery, so you’ll never have to add lubricant. These bearings also keep your workspace clean with no lubricant to drip or flake and attract dust. Compared to all-metal bearings, they are lighter.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
PTFE with Aluminum Shell—A lightweight upgrade from our steel shell. These bearings also offer good corrosion resistance similar to stainless steel but aren’t as strong.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PTFE with Aluminum Shell | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3" | 7,600 lb. @ 30 rpm | -400 to 400 | 59575K61 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Oil-Embedded Flanged Sleeve Bearings
![]() |
Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
Extreme-Strength Heat-Treated Iron Copper—Our strongest oil-embedded flanged sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.
Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Base Oil | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 8,750 lb. @ 30 rpm | 9,300 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6338K443 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3/4" | 2 1/2" | 1/8" | 3,000 lb. @ 30 rpm | 3,500 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6338K611 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1 1/4" | 2 1/2" | 1/8" | 5,000 lb. @ 30 rpm | 3,500 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6338K612 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 2 1/2" | 1/8" | 8,000 lb. @ 30 rpm | 3,500 lb. @ 30 rpm | Synthetic Oil | -35 to 300 | 6338K613 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength 863 Iron Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 11,100 lb. @ 30 rpm | 6,900 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2938T66 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3/4" | 2 1/2" | 1/8" | 3,300 lb. @ 30 rpm | 3,100 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2938T723 | 0000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1 1/4" | 2 1/2" | 1/8" | 5,550 lb. @ 30 rpm | 3,100 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2938T724 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 2 1/2" | 1/8" | 8,900 lb. @ 30 rpm | 3,100 lb. @ 30 rpm | Synthetic Oil | -15 to 300 | 2938T725 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Extreme-Strength Heat-Treated Iron Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 23,850 lb. @ 30 rpm | 14,800 lb. @ 30 rpm | Mineral Oil | 10 to 220 | 3731K29 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 2 1/2" | 1/8" | 19,050 lb. @ 30 rpm | 6,750 lb. @ 30 rpm | Mineral Oil | 10 to 220 | 3731K31 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dry-Running Sleeve Bearings
![]() |
Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE—Woven polyester resin reinforces these PTFE bearings to support loads and speeds comparable to metal bearings. Similar to other PTFE options, they are unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
Extreme-Strength Ultra-Chemical-Resistant Fiberglass-Backed PTFE—Our strongest PTFE bearings. They’re ideal for heavy loads thanks to a backing layer made of fiberglass. The PTFE core is unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Color | Temp. Range, ° F | 1-24 | 25-99 | 100-Up | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 2 1/4" | 3" | 9,500 lb. @ 30 rpm | Blue | -40 to 150 | 1521N25 | 000000 | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 6,350 lb. @ 30 rpm | Blue | -40 to 150 | 1521N19 | 00000 | 00000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Extreme-Strength Ultra-Chemical-Resistant Fiberglass-Backed PTFE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 1 1/2" | 15,150 lb. @ 30 rpm | Gray | -55 to 280 | 6365K416 | 00000 | 00000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 3" | 30,350 lb. @ 30 rpm | Gray | -55 to 280 | 6365K417 | 00000 | 00000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![]() |
Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Base Oil | Lubricant Additive | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 8,750 lb. @ 30 rpm | 9,300 lb. @ 30 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K396 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 2 1/2" | 1/8" | 8,000 lb. @ 30 rpm | 3,500 lb. @ 30 rpm | Synthetic Oil | PTFE | -140 to 460 | 1677K397 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Grooved Sleeve Bearings
![]() |
A figure-8-shaped groove provides a flow path for lubricant and distributes it evenly inside the bearing’s surface. A refill hole on the outside lets you inject your lubricant straight into the groove. These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.
High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High-Strength 932 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 1/2" | 2 1/4" | 3" | 15,750 lb. @ 30 rpm | -350 to 450 | 7965K61 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 1 3/4" | 10,700 lb. @ 30 rpm | -350 to 450 | 7965K62 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 14,000 lb. @ 30 rpm | -350 to 450 | 7965K65 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 17,500 lb. @ 30 rpm | -350 to 450 | 7965K64 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength Chemical-Resistant 954 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 15,600 lb. @ 30 rpm | -350 to 500 | 2924T68 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 19,500 lb. @ 30 rpm | -350 to 500 | 2924T69 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dry-Running Flanged Sleeve Bearings
![]() |
Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE—Woven polyester resin reinforces these PTFE bearings to support loads and speeds comparable to metal bearings. Similar to other PTFE options, they are unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Color | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High-Strength Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 2 1/2" | 1/4" | 6,350 lb. @ 30 rpm | 2,250 lb. @ 30 rpm | Blue | -40 to 150 | 1523N17 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Graphite-Lubricated Sleeve Bearings
![]() |
Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
High-Strength Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.
For Shaft Dia. | For Housing ID | Lg. | Dynamic Radial Load Cap. @ Speed | Temp. Range, ° F | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 6,400 lb. @ 30 rpm | -50 to 700 | 9368T242 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 8,000 lb. @ 30 rpm | -50 to 700 | 9368T243 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Strength Chemical-Resistant 954 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2" | 15,600 lb. @ 30 rpm | -350 to 500 | 2927T68 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2" | 2 1/4" | 2 1/2" | 19,500 lb. @ 30 rpm | -350 to 500 | 2927T69 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
High-Temperature Graphite-Lubricated Flanged Sleeve Bearings
![]() |
Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.
Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
For Shaft Dia. | For Housing ID | Lg. | Flange OD | Flange Thk. | Dynamic Radial Load Cap. @ Speed | Dynamic Thrust Load Cap. @ Speed | Temp. Range, ° F | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
841 Bearing Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1 3/4" | 2 1/4" | 2 1/2" | 3" | 1/4" | 7,000 lb. @ 30 rpm | 7,450 lb. @ 30 rpm | -50 to 700 | 9440T65 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||