About Plain Bearings
More
About Linear Bearings
More
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Nylon Bearings | ||||||
---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||
22mm | 16mm | 100 lbs. @ 60 rpm | Off-White | -10° to 220° | 00000000 | 000000 |
22mm | 25mm | 155 lbs. @ 60 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 17mm Shaft Dia. | ||||||
22mm | 20mm | 125 lbs. @ 60 rpm | Off-White | -10° to 220° | 00000000 | 00000 |
For 18mm Shaft Dia. | ||||||
22mm | 18mm | 110 lbs. @ 60 rpm | Off-White | -10° to 220° | 0000000 | 00000 |
Metric Acetal Bearings | ||||||
For 16mm Shaft Dia. | ||||||
22mm | 20mm | 135 lbs. @ 60 rpm | White | -20° to 180° | 0000000 | 0000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings.
Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | |||||||
22mm | 20mm | 100 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric PTFE Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||
22mm | 20mm | 50 lbs. @ 60 rpm | White | -350° to 500° | 0000000 | 000000 |
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
PEEK bearings are lightweight and strong.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Cap. | Color | Temp. Range, °F | Each | |
Metric PEEK Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||
22mm | 30mm | 1,050 lbs. @ 60 rpm | Gold | -20° to 480° | 00000000 | 000000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | |||||||
16.1mm | 22mm | 20mm | 490 lbs. @ 60 rpm | Maroon | -400° to 550° | 0000000 | 000000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 15 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
22 | 15 | 690 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
22 | 20 | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 25 | 1,150 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 30 | 1,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 16 mm Shaft Dia. | |||||||
22 | 12 | 590 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 16 | 790 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22 | 20 | 990 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22 | 25 | 1,200 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 30 | 1,450 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 35 | 1,700 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 17 mm Shaft Dia. | |||||||
22 | 15 | 790 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 20 | 1,050 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
22 | 25 | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
For 18 mm Shaft Dia. | |||||||
22 | 18 | 1,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22 | 22 | 1,200 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22 | 28 | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22 | 30 | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 16mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
22mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
22mm | 20mm | 1,750 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 18mm Shaft Dia. | |||||||
22mm | 18mm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
22mm | 22mm | 1,900 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 16mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
22mm | 16mm | 3,000 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
22mm | 30mm | 5,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
22mm | 35mm | 6,550 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
For 18mm Shaft Dia. | |||||||
22mm | 18mm | 3,350 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
22mm | 30mm | 5,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
---|---|---|---|---|---|---|---|
For 16 mm Shaft Dia. | |||||||
22 | 16 | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
22 | 20 | 1,750 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
For 18 mm Shaft Dia. | |||||||
22 | 22 | 1,900 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 18mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
22mm | 18mm | 1,000 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
High-Load Food Industry Oil-Embedded Sleeve Bearings
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||||
22mm | 16mm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 00000 |
22mm | 20mm | 1,750 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 0000 |
For 18mm Shaft Dia. | ||||||||
22mm | 22mm | 1,900 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 00000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||
22mm | 16mm | 1,550 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 00000 |
22mm | 20mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
22mm | 40mm | 3,950 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
22mm | 45mm | 4,450 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
22mm | 75mm | 7,400 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 18mm Shaft Dia. | ||||||
22mm | 18mm | 2,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
22mm | 22mm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
For 20mm Shaft Dia. | ||||||
22mm | 12mm | 1,450 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 0000 |
22mm | 16mm | 1,950 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
22mm | 20mm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
22mm | 25mm | 3,100 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
22mm | 30mm | 3,700 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
22mm | 40mm | 4,950 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
Multipurpose Sleeve Bearings with Groove
A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface. Bearings are cast bronze, making them strong, wear resistant, and excellent at handling shock loads. 932 bearing bronze is sometimes called 660 leaded bronze.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 20mm Shaft Dia. | ||||||
22mm | 25mm | 2,700 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 000000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | |||||||||
22mm | 15mm | 28mm | 3mm | 360 lbs. @ 60 rpm | 360 lbs. @ 60 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
22mm | 20mm | 28mm | 3mm | 480 lbs. @ 60 rpm | 360 lbs. @ 60 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
For 19mm Shaft Dia. | |||||||||
22mm | 23mm | 26mm | 1mm | 550 lbs. @ 60 rpm | 230 lbs. @ 60 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 18 mm Shaft Dia. | ||||||||||
22mm | 22mm | 26mm | 2mm | 55 lbs. @ 60 rpm | 26 lbs. @ 60 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 000000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 18mm Shaft Dia. | ||||||||
22mm | 12mm | 26mm | 2mm | Not Rated | Not Rated | -350° to 450° | 00000000 | 000000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||||||
22mm | 12mm | 28mm | 3mm | 590 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 00000 |
22mm | 16mm | 28mm | 3mm | 790 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22mm | 20mm | 28mm | 3mm | 990 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22mm | 25mm | 28mm | 3mm | 1,200 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
For 18mm Shaft Dia. | ||||||||||
22mm | 12mm | 26mm | 2mm | 660 lbs. @ 60 rpm | 850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
22mm | 18mm | 26mm | 2mm | 1,000 lbs. @ 60 rpm | 850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
22mm | 22mm | 26mm | 2mm | 1,200 lbs. @ 60 rpm | 850 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||||||
22mm | 16mm | 28mm | 3mm | 1,400 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
22mm | 20mm | 28mm | 3mm | 1,750 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
For 18mm Shaft Dia. | ||||||||||
22mm | 12mm | 26mm | 2mm | 1,050 lbs. @ 60 rpm | 930 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
22mm | 18mm | 26mm | 2mm | 1,550 lbs. @ 60 rpm | 930 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||||||
22mm | 16mm | 28mm | 3mm | 790 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
22mm | 20mm | 28mm | 3mm | 990 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
For 18mm Shaft Dia. | ||||||||||
22mm | 12mm | 26mm | 2mm | 660 lbs. @ 60 rpm | 850 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
22mm | 18mm | 26mm | 2mm | 1,000 lbs. @ 60 rpm | 850 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
16 mm Shaft Dia. | ||||||||||
22 | 16 | 28 | 3 | 1,400 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
22 | 20 | 28 | 3 | 1,750 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
18 mm Shaft Dia. | ||||||||||
22 | 18 | 26 | 2 | 1,550 lbs. @ 60 rpm | 930 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
22 | 22 | 26 | 2 | 1,900 lbs. @ 60 rpm | 930 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | |||||||||||
22mm | 16mm | 28mm | 3mm | 790 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
22mm | 20mm | 28mm | 3mm | 990 lbs. @ 60 rpm | 1,250 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 0000 |
For 18mm Shaft Dia. | |||||||||||
22mm | 18mm | 26mm | 2mm | 1,000 lbs. @ 60 rpm | 850 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 0000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | ||||||||||
22mm | 16mm | 28mm | 3mm | 1,550 lbs. @ 60 rpm | 2,550 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 0000000 | 000000 |
22mm | 20mm | 28mm | 3mm | 1,950 lbs. @ 60 rpm | 2,550 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
For 18mm Shaft Dia. | ||||||||||
22mm | 12mm | 26mm | 2mm | 1,300 lbs. @ 60 rpm | 1,700 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 0000 |
22mm | 18mm | 26mm | 2mm | 2,000 lbs. @ 60 rpm | 1,700 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 16mm Shaft Dia. | |||||||||
22mm | 12mm | 28mm | 3mm | 1,300 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 000000 |
22mm | 16mm | 28mm | 3mm | 1,750 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
22mm | 20mm | 28mm | 3mm | 2,200 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
22mm | 25mm | 28mm | 3mm | 2,750 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
22mm | 30mm | 28mm | 3mm | 3,300 lbs. @ 60 rpm | 2,850 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
For 20mm Shaft Dia. | |||||||||
22mm | 12mm | 24mm | 1mm | 1,650 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 0000 |
22mm | 20mm | 24mm | 1mm | 2,750 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
High-Speed Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. Bearings are for use with round end-supported shafts. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
For technical drawings and 3-D models, click on a part number.
Bearings | External Retaining Rings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | Each | Pkg. of 1 | ||
Fixed Alignment | ||||||||||||
Ceramic-Lined 6061 Aluminum Bearings | ||||||||||||
12mm | 32mm | 22 mm | 20mm | 150 lbs. @ 100 fpm | 2,950 | 0.0127mm to 0.0381mm | -200° to 400° | Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |