A metal shell adds strength.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

An aluminum shell adds strength.

Good for underwater applications, these bearings won’t swell or warp when wet.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Embedded with lubricant that’s FDA compliant for incidental food contact, these bearings are good for high-load applications such as bottling and filling lines in food plants.

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.