51mm Spacers | McMaster-Carr

These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Strength 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
High-Strength 932 Bearing Bronze



	45	51	32	57	3	8,900 lb. @ 30 rpm	5,950 lb. @ 30 rpm	-350 to 450	5448T32	000000
	45	51	45	57	3	12,250 lb. @ 30 rpm	5,950 lb. @ 30 rpm	-350 to 450	5448T586	00000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F		Each
High-Strength 863 Iron Copper



	45	51	25	57	3	4,350 lb. @ 30 rpm	2,950 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	7119N193	000000
	45	51	32	57	3	5,600 lb. @ 30 rpm	2,950 lb. @ 30 rpm	Synthetic Oil	PTFE	-60 to 300	7119N194	00000

Oil-Embedded Flanged Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	45	51	25	57	3	3,450 lb. @ 30 rpm	2,950 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6659K722	000000
	45	51	32	57	3	4,450 lb. @ 30 rpm	2,950 lb. @ 30 rpm	Synthetic Oil	-35 to 300	6659K723	00000


	High-Strength 863 Iron Copper



			45	51	32	57	3	5,600 lb. @ 30 rpm	2,950 lb. @ 30 rpm	Synthetic Oil	-15 to 300	2938T824	00000