Made of aluminum, these spacers are lightweight and mildly corrosion resistant.

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

These spacers have excellent wear and abrasion resistance. Exposure to moisture may cause them to expand.

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

Also known as Type B washers, these distribute your fastener's load over a larger surface area than other washers to minimize damage to soft materials.

These metric washers surpass most other plastic washers when it comes to withstanding chemicals, oil, and grease.

Low moisture absorption and good heat resistance make these metric washers suitable for wet and harsh environments.

These metric washers hold up in blistering temperatures up to 3000° F.

The extra-tall sleeve extends into holes to provide more protection than other rolled-collar washers.

Plastic washers are good electrical insulators.

A specially shaped ID grips your screw shank tightly.

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Sunlight, ozone, and water won’t affect these washers.

These washers withstand harsh chemicals such as acetic acid and isopropyl alcohol.